Abstract
A technique and experimental results of the evaluation of free furfural content in glued wood materials produced with the use of furan oligomers are presented.
Similar content being viewed by others
References
S. A. Ugryumov, Pol. Sci. Ser. D, No. 10, 14–16 (2008).
Encyclopedia of Occupational Safety and Health, in 4 vols. (Profizdat, Moscow, 1985), Vol. 3 [in Russian].
V. A. Bazhenov, in Harmful Chemicals. Radioactive Substances, Eds. by A. A. Il’in and V. A. Filov (Khimiya, Leningrad, 1990) [in Russian].
Hygienic Standards 2.1.6.1338-03. The Maximum Permissible Concentration (MPC) of Pollutants in the Air of Populated Areas. http://www.ohranatruda.ru
GOST 12.1.005-88. Standard 12.1.005-88. General Hygiene Requirements for Working Zone Air (Izd. Standartov, Moscow, 2004), p. 48 [in Russian].
Yu. Yu. Lurie, Analytical Chemistry of Industrial Wastewater (Khimimya, Moscow, 1984).
Yu. V. Vodzinskii and A. S. Maslennikov, Methods for Rapid Furfurol Detection (TsNIIPI Lesokhim. Prom., Moscow, 1961) [in Russian].
GOST 3916.1-96. General Purpose Plywood with Outer Layers of Hardwood Veneer. Specifications (Izd. Standartov, Minsk, 1997) [in Russian].
GOST 10632-2007. Resin-Bonded Chipboard. Specifications (Standartinform, Moscow, 2007) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.A. Ugryumov, 2012, published in Klei. Germetiki. Tekhnologii, 2012, No. 3, pp. 22–24.
Rights and permissions
About this article
Cite this article
Ugryumov, S.A. A method of quantitative evaluation of the content of free furfural in glued wood materials based on furan oligomers. Polym. Sci. Ser. D 6, 51–53 (2013). https://doi.org/10.1134/S1995421212040223
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421212040223