Abstract
Some results of an experimental study of liquid film flow over the surface of a structured packing with a new design for heat and mass exchangers were presented. The influence of the irrigation density on the overflow of liquid from one side of a packing element to the other side was studied. The overflow of liquid from one side of a packing element to the other side was shown to occur abruptly upon attaining a certain irrigation density. A dimensionless quantity, namely, the overflow number, was proposed for estimating uniformity in the distribution of a liquid film over a structured perforated packing bed.
Similar content being viewed by others
References
Couper, J.R., Penney, W.R., Fair, J.R., and Walas, S.M., Chemical Process Equipment Selection and Design, Waltham, Mass.: Elsevier, 2012.
Taubman, E.I., Gornev, V.A., Mel’tser, V.L., Pastushenko, B.L., and Savinkin, V.I., Kontaktnye teploobmenniki (Direct-Contact Heat Exchangers), Moscow: Khimiya, 1987.
Towler, G. and Sinnot, R., Chemical Engineering Design Principles, Practice and Economics of Plant and Process Design, Burlington, Mass.: Elsevier, 2008.
Dmitrieva, G.B., Berengarten, M.G., Kagan, A.M., Pushnov, A.S., and Klimov, A.G., Comparison of tray and packed contact devices in column vessels, Chem. Petr. Eng., 2007, vol. 43, no. 1–2, pp. 11–14.
Kontaktnye nasadki promyshlennykh teplomassoobmennykh apparatov (Packing Elements of Industrial Heat and Mass Transfer Apparatuses), Laptev, A.G., Ed., Kazan: Otechestvo, 2013.
Plenochnaya teplo- i massoobmennaya apparatura (Film Heat and Mass Transfer Apparatuses), Olevskii, V.M., Ed., Moscow: Khimiya, 1988.
Gorodilov, A.A., Pushnov, A.S., and Berengarten, M.G., Improving the design of grid packing, Chem. Pet. Eng., 2014, vol. 50, no. 1–2, pp. 84–90.
Vorontsov, E.G., Flow of liquid films along a rough vertical wall, Zh. Prikl. Khim., 1969, vol. 42, no. 9, p. 2037.
Nikolaev, A.A., Hydrodynamics and heat and mass transfer in film reactors for microbiological synthesis, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Kazan: Kazan State Technological Univ., 2007.
Voinov, N.A., Nikolaev, A.N., and Voinova, O.N., Hydrodynamics and heat and mass transfer in film bioreactors, Khim. Rastit. Syr’ya, 2009, no. 4, pp. 183–193.
Trifonov, Yu.Ya., Flow of viscous films down wavy surfaces, Prikl. Mekh. Tekh. Fiz., 2004, vol. 45, no. 9, p. 97.
Volodin, O.A., Heat transfer and critical phenomena in film flows of binary refrigerant mixtures over smooth and structured surfaces, Cand. Sci. (Phys,–Math) Dissertation, Novosibirsk: Kutateladze Inst. of Thermophysics, 2014.
Lozano, A.M., Experiments on falling film evaporation of a water–ethylene glycol mixture on a surface with longitudinal grooves, Doktor der Ingenieurwissenschaften, Berlin: Technischen Universität Berlin, 2007.
Ryabchuk, G.V., Nikulin, I.A., Golovanchikov, A.B., Popovich, G.A., and Mishta, P.V., et al., Determinatiom of the basic dynamical parameters of power-law liquid flow on the permeable surface of an arbitrarily shaped packing element, Izv. Volgogr. Gos. Tekh. Univ., Ser. Reol., Protsessy Apparaty Khim. Tekhnol., 2010, vol. 1, no. 3, p. 21–26.
Alekseenko, S.V., Markovich, D.M., Evseev, A.R., Bobylev, A.V., Tarasov, B.V., and Karsten, V.M., Experimental study of liquid distribution in a column with a structured packing, Theor. Found. Chem. Eng., 2007, vol. 41, no. 4, pp. 417–423.
Pavlenko, A., Pecherkin, N., Chekhovich, V., and Volodin, O., Hydrodynamics in falling liquid films on surfaces with complex geometry, Microgravity Sci. Technol., 2009, vol. 21, Suppl. no. 1, p. 207–213.
Golovachevskii, Yu.A., Orositeli i forsunki skrubberov khimicheskoi promyshlennosti (Sprinklers and Sprayers of Scubbers in the Chemical Industry), Moscow: Mashinostroenie, 1974.
Alekseenko, S.V., Nakoryakov, V.E., and Pokusaev, B.G., Volnovoe techenie plenok zhidkosti (Wavy Flow of Liquid Films), Novosibirsk: Nauka, 1992.
Voinov, N.A., Sugak, E.V., Nikolaev, N.A., and Voronin, S.M., Plenochnye bioreaktory (Film Bioreactors), Krasnoyarsk: BORGES, 2001.
Kholpanov, L.P. and Shkadov, V.Ya., Gidrodinamika i teplomassoobmen s poverkhnost’yu razdela (Hydrodynamics and Heat Mass Transfer Involving an Interface), Moscow: Nauka, 1990.
Pushnov, A., Petrashova, E., and Shinkunas, S., Aerothermal testing of a regular packing made from convoluted polymer tubes, Energetika, 2011, vol. 57, no. 3, pp. 187–193.
Yoshiyuki, I. and Xi, C., Development of numerical prediction of liquid film flows on packing elements in absorbers, IHI Eng. Rev., 2012, vol. 44, no. 2, pp. 78–85.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.A. Gorodilov, M.G. Berengarten, A.S. Pushnov, 2016, published in Teoreticheskie Osnovy Khimicheskoi Tekhnologii, 2016, Vol. 50, No. 3, pp. 334–343.
Rights and permissions
About this article
Cite this article
Gorodilov, A.A., Berengarten, M.G. & Pushnov, A.S. Features of fluid film falling on the corrugated surface of structured packings with perforations. Theor Found Chem Eng 50, 325–334 (2016). https://doi.org/10.1134/S0040579516030040
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0040579516030040