A set of analytical methods for the estimation of elemental and grain-size composition of volcanic ash

Abstract

A combined approach to the analysis of volcanic ash (VA) was proposed. Ash particles were separated by size using a combination of vibration sieving on sieves (140, 70, 40 μm) and field-flow fractionation in a rotating coiled column (for separation of nano- and submicron particles). Initial samples and obtained fractions were characterized using scanning electron microscopy and static light scattering. Their elemental composition was determined using ICP-MS and ICP-AES methods. The radionuclide composition of the VA was studied by the low-background gamma spectrometry. The studies were carried out by the example of ashes from Puyehue volcano, the Puyehue Cordón Caulle volcanic group, Andes (Santiago, eruption on June, 2011), which were taken immediately after eruption and after first rain. It was shown that up to 15% of major elements (such as P, Ca, and К) and trace elements (such as Be, Hg, Tl, As, Sb, and Bi) could be extracted from the ash by rain and migrate into environment. It was also found that the content of radionuclides (U²³⁵, Th²³⁴, Pb²¹⁴, Bi²¹⁴, Be⁷) after rain decreases by 30–40%. Of special interest are ash nanoparticles (up to 200 nm), in which the contents of Cu, Pb, Tl, Bi, Sn, As, and Sb are over an order of magnitude higher than the bulk contents of these elements in the ash. This regularity was found in samples taken both prior to and after rain. The proposed methodology of fractionation, study, and analysis of ash particles may be applied for a wide range of soil, ash, and dust samples of different nature.