Abstract
Anatase nanostructured coating has been prepared on 316 L stainless steel by sol-gel dip coating. The topography of the coatings surface has been analyzed using atomic force microscopy. The anticorrosion performance of the coatings has been evaluated using polarization curves. Effects of calcination temperature, withdrawal speed and times of coating on corrosion protection have been studied. The results showed calcination temperature of 400°C and withdrawal speed of 10 cm/min are desirable conditions to achieve high corrosion protection of 316 L stainless steel in chloride containing environments. Coatings with 3 times exhibit better resistance against corrosion in 0.5 molar NaCl solutions. This protection against corrosion arises from photocatalytic properties of anatase nanoparticles.
Similar content being viewed by others
References
Wang, D. and Bierwagen, G.P., Prog. Org. Coat., 2009, vol. 64, p. 327.
Nguyen, T.N., Hubbard, J.B., and McFadden, G.B., Coatings Technol., 1991, vol. 63, p. 43.
Chou, T.P., Mater. Sci. Lett., 2002, vol. 21, p. 251.
Corrosion, Shreir, L.L., Jarman, R.A., and Burstein, G.T., Eds., Oxford: Butterworth-Heinemann, 1994, 3rd ed.
Branko N. Popov and Swaminatha P. Kumaraguru, Handbook of Environmental Degradation of Materials, Elsevier, 2012, 2nd ed., p. 771.
Lakhotkin, Yu.V., Kuzmin, V.P., and Goncharov, V.L., Protection of Metals and Physical Chemistry of Surfaces, 2009, vol. 45, p. 833.
Golovin, V.A., Protection of Metals and Physical Chemistry of Surfaces, 2011, vol. 47, p. 830.
Pravin P. Deshpande, Shashikant T. Vagge, Sunil P. Jagtap, et al., Protection of Metals and Physical Chemistry of Surfaces, 2012, vol. 48, p. 356.
Nazarov, A.P. and Thierry, D., Protection of Metals and Physical Chemistry of Surfaces, 2009, vol. 45, p. 735.
Aysel Büyükagis, Nihal Çiiftçi, Yavuz Ergün, and Yusuf Kayali, Protection of Metals and Physical Chemistry of Surfaces, 2011, vol. 47, p. 670.
Marina, E., Guzmana, L., Lanzuttia, A., et al., J. Thin Solid Films, 2012, vol. 522, p. 283.
Shanaghi, A., Sabour, A.R., and Shahrabi, T., Protection of Metals and Physical Chemistry of Surfaces, 2009, vol. 45, p. 305.
Tsung-Kuang Yeha, Yu-Jen Huanga, Mei-Ya Wangc, and Chuen-Horng Tsai, J. Nucl. Eng. Des., 2013, vol. 254, p. 228.
Guglielmi, M., J. Sol-Gel Sci. Technol., 1997, vol. 8, p, 443.
Wang, D. and Bierwagen, G.P., J. Prog. Org. Coat., 2009, vol. 64, p. 327.
Guohong Wang, J. Molecular Catalysis A, 2007, vol. 274, p. 185.
Liu, G., Chen, Z.G., Dong, C.L., et al., J. Phys. Chem. B, 2006, vol. 110, p. 20823.
Kolen’ko, Y.V., Churagulov, B.R., Kunst, M., et al., J. Appl. Catal. B: Environ., 2004, vol. 54, p. 51.
Liu, G., Chen, Z.G., Dong, C.L., et al., J. Phys. Chem. B, 2006, vol. 110, p. 20823.
Yu, J.C., Yu, J., and Zhao, J., J. Appl. Catal. B, 2002, vol. 36, p. 31.
Subramanian, V., Wolf, E.E., and Kamat, P.V., J. Am. Chem. Soc., 2004, vol. 126, p. 4943.
Yu, J.C., Yu, J., Ho, W., et al., J. Chem. Mater., 2002, vol. 14, p. 3808.
Qiu, J.X., Li, Z.H., and Zhang, H., J. Surf. Eng., 2008, vol. 24, p. 240.
Sibu, C.P., Rajesh Kumar, S., Mukundan, P., and Warrier, K.G.K., J. Chem. Mater., 2002, vol. 14, p. 2876.
Yu, J., Wang, G., Cheng, B., and Zhou, M., J. Appl. Catal. B, 2007, vol. 69, p. 171.
Barati, N., Faghihi Sani, M.A., and Ghasemi, H., Protection of Metals and Physical Chemistry of Surfaces, 2013, vol. 49, p. 109.
Huang, J., Shinohara, T., and Tsujikawa, S., J. Corros. Eng., 1997, vol. 46, p. 789.
Park, H., Kim, K.Y., and Choi, W., J. Phys. Chem., 2002, vol. 106, p. 4775.
Subasri, R. and Shinohara, T., J. Electrochem. Comm., 2003, vol. 5, p. 897.
Barati, N., Faghihi Sani, M.A., Ghasemi, H., et al., Appl. Surf. Sci., 2009, vol. 255, p. 8328.
Sumita, T., Yamaki, T., Yamamoto, S., and Miyashita, A., Appl. Surf. Sci., 2002, vol. 200, p. 21.
Huruma, D.C., Agrios, A.G., Crist, S.E., et al., J. Electron. Spectrosc. Relat. Phenom., 2006, vol. 150, p. 155.
Kuznetsova, I.N., Blaskov, V., and Znaidi, L., J. Mater. Sci. Eng. B, 2007, vol. 137, p. 31.
Author information
Authors and Affiliations
Corresponding author
Additional information
The article is published in the original.
Rights and permissions
About this article
Cite this article
Barati, N., Sani, M.A.F., Sadeghian, Z. et al. Titania nanostructured coating for corrosion mitigation of stainless steel. Prot Met Phys Chem Surf 50, 371–377 (2014). https://doi.org/10.1134/S2070205114030034
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2070205114030034