Abstract
The mechanical properties of ice and snow are reviewed. The tensile strength of ice varies from 0.7–3.1 MPa and the compressive strength varies from 5–25 MPa over the temperature range −10°C to −20°C. The ice compressive strength increases with decreasing temperature and increasing strain rate, but ice tensile strength is relatively insensitive to these variables. The tensile strength of ice decreases with increasing ice grain size. The strength of ice decreases with increasing volume, and the estimated Weibull modulus is 5. The fracture toughness of ice is in the range of 50–150 kPa m1/2 and the fracture-initiating flaw size is similar to the grain size. Ice-soil composite mixtures are both stronger and tougher than ice alone. Snow is a open cellular form of ice. Both the strength and fracture toughness of snow are substantially lower than those of ice. Fracture-initiating flaw sizes in snow appear to correlate to the snow cell size.
Similar content being viewed by others
References
R. M. Andrews, Journal of Glaciology 31 (1985) 171.
M. Mellor, ibid. 19 (1977) 15.
R. L. Hooke et al., Cold Regions Science and Technology 3 (1980) 263.
J. M. Greenberg, Astronomy and Astrophysics 330 (1998) 375.
E. M. Schulson, Journal of the Minerals, Metals, Materials Society 51 (1999) 21.
L. W. Gold, Canadian Journal of Civil Engineering 15 (1988) 1080.
F. D. Haynes, “Effect of Temperature on the Strength of Snow-Ice,” Department of the Army, Cold Regions Research and Engineering Laboratory, Corps of Engineers, CRRELReport 78-27, Hanover, New Hampshire, December 1978.
J. H. Currier and E. M. Schulson, Acta metal. 30 (1982) 1511.
R. W. Lee and E. M. Schulson, Journal of Offshore Mechanics and Arctic Engineering 110 (1988) 187.
X. Xian, M. L. Chu, R. J. Scavuzzo and T. S. Srivatsan, Journal Mater. Sci. Lett. 8 (1989) 1205.
J. Druez and P. McComber, Transactions of the Canadian Society for Mechanical Engineering 13 (1989) 59.
E. M. Schulson, S. G. Hoxie and W. A. Nixon, Philosophical Magazine A 59 (1989) 303.
P. Duval, M. F. Ashby and I. Anderman, J. Phys. Chem 87 (1983) 4066.
J. Weertman, Annu. Rev. Earth Planet Sci. 11 (1983) 215.
J. P. Dempsey, S. J. Defranco, R. M. Adamson and S. V. Mulmule, International Journal of Fracture 95 (1999) 325.
J. P. dempsey, R. M. Adamson and S. V. Mulmule, ibid. 95 (1999) 347.
W. Weibull, Ingenioersvetenskapsakad., Handl. 151 (1939) 1.
J. J. Petrovic, Metallurgical Transactions A 18A (1987) 1829.
R. M. Andrews, Journal of Glaciology 31 (1985) 171.
W. A. Nixon and E. M. Schulson, Journal de Physique 48 (1987) C1–313.
Idem., Journal of Offshore Mechanics and Arctic Engineering 110 (1988) 192.
D. L. Bentley, J. P. Dempsey, D. S. Sodhi and Y. Wei, Cold Regions Science and Technology 17 (1989) 7.
M. P. Fischer, R. B. Alley and T. Engelder, Journal of Glaciology 41 (1995) 138.
L. J. Weber and W. A. Nixon, Journal of Offshore Mechanics and Arctic Engineering 118 (1996) 135.
T. Uchida and S. Kusumoto, JSME International Journal Series A - Solid Mechanics and Materials 42 (1999) 601.
G. R. Anstis, P. Chantikul, B. R. Lawn and D. B. Marshall, Journal of the American Ceramic Society 64 (1981) 533.
B. Lawn, “Fracture of Brittle Solids,” 2nd ed. (Cambridge University Press, Cambridge, UK, 1993.).
W. D. King and N. H. Fletcher, Journal of the Atmospheric Sciences 33 (1976) 97.
F. D. Haynes and J. A. Karalius, “Effect of Temperature on the Strength of Frozen Silt,” Cold Regions Research and Engineering Laboratory Report CRREL 77-3, U.S. Army Corps of Engineers, Hanover, New Hampshire, February 1977.
M. A. Lange and T. J. Ahrens, Journal of Geophysical Research 88 (1983) 1197.
W. A. Nixon and L. J. Weber, Journal of Cold Regions Engineering 5 (1991) 14.
H. Li and H. Yang, ibid. 14 (2000) 43.
H. Li, H. Yang and Z. Liu, Can. Geotech. J. 37 (2000) 253.
L. J. Gibson and M. F. Ashby, “Cellular Solids,” 2nd ed. (Cambridge University Press, 1997.).
R. A. Sommerfeld, Journal of Geophysical Research 79 (1974) 3353.
D. M. McClung, Journal of Glaciology 22 (1979) 1.
Z. Watanabe, ibid. 26 (1980) 255.
H. Narita, ibid. 26 (1980) 275.
B. Salm, Reviews of Geophysics and Space Physics 20 (1982) 1.
H. Narita, Contributions From the Institute of Low Temperature Sciences, Series A 32 (1983) 1.
J. B. Johnson, D. J. Solie, J. A. Brown, and E. S. Gaffney, J. Appl. Phys. 73 (1993) 4852.
K. C. Agrawal and R. K. Mittal, Defence Science Journal 45 (1995) 93.
V. N. Golubev and A. D. Frolov, Annals of Glaciology 26 (1998) 45.
R. F. Trunin, G. V. Simakov, M. V. Zhernokletoy and V. V. Dorokhin, High Temperature 37 (1999) 702.
H. O. K. Kirchner, G. Michot and T. Suzuki, Philosophical Magazine A 80 (2000) 1265.
V. N. Golubev and A. D. Frolov, Annals of Glaciology 31 (2000) 434.
H. O. K. Kirchner, G. Michot and J. Schweizer, Scripta Materialia 46 (2002) 425.
S. K. Maiti, M. F. Ashby and L. J. Gibson, ibid. 18 (1984) 213.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Petrovic, J.J. Review Mechanical properties of ice and snow. Journal of Materials Science 38, 1–6 (2003). https://doi.org/10.1023/A:1021134128038
Issue Date:
DOI: https://doi.org/10.1023/A:1021134128038