Skip to main content
Log in

Influence of scalloping on electrostatic forces in comb drive microdevices

  • Original Article
  • Published:
ISSS Journal of Micro and Smart Systems Aims and scope Submit manuscript

Abstract

Deep reactive-ion etching process is one of the most widely used manufacturing processes for micro-electro-mechanical-system (MEMS) devices, but the main problem with this process is that it leads to undesirable fabrication defects such as slanting, scalloping, etc. In this work, we develop analytical model to capture the effect of scalloping on electrostatic forces in a MEMS-based comb structure. In addition, we also modify the formula to include the parameters related to the size as well as number of scallops. To develop the model, we assume the shape of a scallop as elliptical which is characterized by major axis (2a) and semi-minor axis (b). To validate the model, we compare results with finite element results obtained using Coventerware for single as well as multi-scallops. Subsequently, we discuss the combined effect of scalloping and slanting on electrostatic forces in a comb drive structure. The model presented in the paper may be useful at the design stage of various comb drive MEMS devices such as MEMS gyroscopes.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  • Avdeev IV, Lovell MR, Onipede D Jr (2003) Modeling in-plane misalignments in lateral combdrive transducers. J Micromech Microeng 13(6):809

    Article  Google Scholar 

  • Ayón Arturo A, Braff R, Chuang-Chia Lin, Sawin Herb H, Schmidt Martin A (1999) Characterization of a time multiplexed inductively coupled plasma etcher. J Electrochem Soc 146(1):339–349

    Article  Google Scholar 

  • Kambali PN, Pandey AK (2016) Capacitance and force computation due to direct and fringing effects in MEMS/NEMS arrays. IEEE Sens J 16(2):375–382

    Article  Google Scholar 

  • Li J, Zhang QX, Liu AQ, Goh WL, Ahn J (2003) Technique for preventing stiction and notching effect on silicon-on-insulator microstructure. J Vac Sci Technol B Microelectron Nanometer Struct Process Meas Phenom 21(6):2530–2539

    Article  Google Scholar 

  • Li J, Liu AQ, Zhang QX (2006) Tolerance analysis for comb-drive actuator using DRIE fabrication. Sens Actuators A Phys 125(2):494–503

    Article  Google Scholar 

  • McAuley SA, Ashraf H, Atabo L, Chambers A, Hall S, Hopkins J, Nicholls G (2001) Silicon micromachining using a high-density plasma source. J Phys D Appl Phys 34(18):2769

    Article  Google Scholar 

  • Menon PK, Nayak J, Pratap R (2018) Sensitivity analysis of an in-plane MEMS vibratory gyroscope. Microsyst Technol 24(5):2199–2213

    Article  Google Scholar 

  • Rebeiz GM (2004) RF MEMS: theory, design, and technology. Wiley, New York

    Google Scholar 

  • Singulani AP, Ceric H, Filipovic L, Langer E (April 2013) Impact of bosch scallops dimensions on stress of an open through Silicon Via technology. In: 14th international conference on thermal, mechanical and multi-physics simulation and experiments in microelectronics and microsystems (EuroSimE), Wroclaw, Poland, pp 1–6. https://doi.org/10.1109/EuroSimE.2013.6529938

  • Weinberg MS, Anthony Kourepenis (2006) Error sources in in-plane silicon tuning-fork MEMS gyroscopes. IEEE J Microelectromech Syst 15(3):479–491

    Article  Google Scholar 

  • Zarowin CB (1984) Relation between the RF discharge parameters and plasma etch rates, selectivity, and anisotropy. J Vac Sci Technol A Vac Surf Films 2(4):1537–1549

    Article  Google Scholar 

Download references

Acknowledgements

The authors would like to acknowledge partially financial support from Research Centre Imarat (RCI), Hyderabad 500069, India.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to A. K. Pandey.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

V. S. Pawar and P. K. Menon contributed equally to this work.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Pawar, V.S., Menon, P.K., Murty, A.L. et al. Influence of scalloping on electrostatic forces in comb drive microdevices. ISSS J Micro Smart Syst 8, 127–134 (2019). https://doi.org/10.1007/s41683-019-00042-0

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s41683-019-00042-0

Keywords

Navigation