Erratum to: Metallurgical and Materials Transactions E 3E, 2016, 179–188 DOI: 10.1007/s40553-016-0085-x
-
1.
In the above article, there is a typo on the title page.
The fourth author’s name should be Kinnor Chattopadhyay.
-
2.
In the “Introduction” section, lines 8 and 13, “industry” should be “industrial.”
-
3.
In the first sentence of “A. Thermodynamic Predictions,” the modifications are underlined:
The peak flame temperatures for the combustion of different SPL cases are shown in Figure 4.
-
4.
In the “Conclusions” section, the modifications are underlined:
-
(1)
Injection of SPL (a useful industrial waste), into blast furnaces as an alternative fuel, is a promising and environmentally friendly waste-recycling technique.
-
(2)
Nevertheless, thermodynamic calculation was found to have certain limitations as it ignores the kinetics of combustion.
-
(3)
The combustion of SPL was found to have some prerequisites like blending with natural gas.
-
(1)
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found under doi:10.1007/s40553-016-0085-x.
Rights and permissions
About this article
Cite this article
Gao, L., Mostaghel, S., Ray, S. et al. Erratum to: Using SPL (Spent Pot-Lining) as an Alternative Fuel in Metallurgical Furnaces. Metallurgical and Materials Transactions E 3, 337 (2016). https://doi.org/10.1007/s40553-016-0099-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40553-016-0099-4