Skip to main content
SpringerLink
Log in

Advances in numerical computation based mechanical system design and simulation

  • Published:
Advances in Manufacturing Aims and scope Submit manuscript

Abstract

This paper highlights the available numerical computation techniques in mechanical engineering field with focus on application of modeling and simulation within renewable energy conversion machines as a particular research case. The study makes special focus on simulation approaches based on finite elements and multibody dynamics that are currently focused within the research community. Developing the simulation model in a computer-aided design (CAD) tool is a precondition for a successful simulation-based mechanical system research. The article discusses and elaborates the methods implemented to integrate design data with other computer-aided engineering functions. The motivation is the fact that simulation-based research is useful for design optimization of mechanical systems that operate in harsh and unfriendly environment where conducting physical testing of prototypes is difficult. In addition, the manufacturing environment is benefiting from the developments in numerical computation techniques through machining simulation that significantly reduce the time-to-market and thus increase competitiveness. The study is also intended to explore the existing gaps of capabilities in current approaches in application of computational techniques in order to draw attention to future challenges and trends.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. Petrova R, Lemu HG, Larion I (2013) Study of horizontal axis wind turbine blade in virtual wind tunnel simulator. In: Proceedings of ASME 2013 international mechanical engineering congress and exposition (IMECE2013), 14–21 Nov 2013, San Diego, CA, USA

  2. Milano F (2004) An open source power system analysis toolbox. IEEE Trans Power Syst 20:1199–1206

    Article  Google Scholar 

  3. Li W, Vanfretti L, Chompoobutrgool Y (2012) Development and implementation of hydro turbine and governor models in a free and open source software package. Simul Model Pract Theory 24:84–102

    Article  Google Scholar 

  4. Cigel R et al (2011) Simulation data management—survey report, NAFEMS 2011

  5. Courant R (1943) Variational methods for the solution of problems of equilibrium and vibrations. Bull Am Math Soc 49:1–23

    Article  MATH  MathSciNet  Google Scholar 

  6. Lemu HG (2013) Study of the role of virtual engineering technologies in design. In: Wang KS, Strandhagen JO, Tu DW (eds) Proceedings of international workshop of advanced manufacturing and automation (IWAMA 2013), Tapir Academic Press, Trondheim, No 4, pp 59–69

  7. Luo N, Pacheco L, Vidal Y, Li H (2012) Smart structural control strategies for offshore wind power generation with floating wind turbines. In: Proceedings of international conference on renewable energies & power quality journal, Santiago de Compostela, Spain

  8. Lemu HG (2014) Virtual engineering in design and manufacturing. Adv Manuf 2:289–294

    Article  Google Scholar 

  9. Petrova R, Lemu HG (2014) Stress and displacement analysis of a HAWT under time-variable wind. In: ASME 2014, international mechanical engineering congress and exposition (IMECE2014), 14–20 Nov 2014, Montreal, Canada

  10. Petrova R, Lemu HG (2012) Design study for dynamic behavior of wind turbine blade. In: Proceedings of international workshop of advanced manufacturing and automation (IWAMA 2012), Tapir Academic Press, Trondheim, pp 131–138

  11. Shienlen W (1997) Multibody dynamics: roots and perspectives. Multibody Syst Dyn 1:149–188

    Article  MathSciNet  Google Scholar 

  12. Shen X, Zhu X, Du Z (2011) Wind turbine aerodynamics and loads control in wind shear flow. Energy 36(3):1424–1434

    Article  Google Scholar 

  13. Hansen MOL et al (2006) State of the art in wind turbine aerodynamics and aeroelasticity. Progress Aerosp Sci 42(4):285–330

    Article  Google Scholar 

  14. Lanzafame R, Messina M (2007) Fluid dynamics wind turbine design: critical analysis, optimization and application of BEM theory. Renew Energy 32(14):2291–2305

    Article  Google Scholar 

  15. Rajakumar S, Ravindran D (2012) Iterative approach for optimizing coefficient of power, coefficient of lift and drag of wind turbine rotor. Renew Energy 38:83–93

    Article  Google Scholar 

  16. Glauert H (1963) Airplane propellers. In: Durand WF (ed) Aerodynamic theory. Dover, New York, pp 182–269

  17. Manwell JF, McGrowan JG, Rogers AL (2009) Wind energy explained, theory, design and application. Wiley, Chichester

  18. Helsen J, Vanhollebeke F et al (2011) Multibody modelling of varying complexity for modal behavior analysis of wind turbine gearboxes. Renew Energy 36:3098–3113

    Article  Google Scholar 

  19. Sarangi M, Majumdar B, Sekhar A (2004) Stiffness and damping characteristics of lubricated ball bearings considering the surface roughness effect. part 1: theoretical formulation. Proceedings of the Institution of Mechanical Engineers. Part J: J Eng Tribol 218:529–538

    Google Scholar 

  20. Tomulik P, Fraczek J (2011) Simulation of multibody systems with the use of coupling techniques: a case study. Multibody Syst Dyn 25:145–165

    Article  MathSciNet  Google Scholar 

  21. Das M, Barut A, Madenci E (2010) Analysis of multibody systems experiencing large elastic deformations. Multibody Syst Dyn 23:1–31

    Article  MATH  MathSciNet  Google Scholar 

  22. Wasfy TM, Noor AK (2003) Computational strategies for flexible multibody systems. Appl Mech Rev 56:553–613

    Article  Google Scholar 

  23. Hong D, Ren G (2011) A modelling of sliding joint on one-dimensional flexible medium. Multibody Syst Dyn 26:91–106

    Article  MATH  MathSciNet  Google Scholar 

  24. Finnegan W, Goggins J (2012) Numerical simulation of linear water waves and wave–structure interaction. Ocean Eng 43:23–31

    Article  Google Scholar 

  25. Nunes G, Valério D et al (2011) Modelling and control of a wave energy converter. Renew Energy 36:1913–1921

    Article  Google Scholar 

  26. Babarit A, Hals J et al (2012) Numerical benchmarking study of a selection of wave energy converters. Renew Energy 41:44–63

    Article  Google Scholar 

  27. Buchner B (2010) Model tests and simulations on a wave energy converter based on inverse offshore engineering. Offshore Technol Conf. doi:10.4043/20366-MS

  28. Li Y, Yu YH (2012) A synthesis of numerical methods for modelling wave energy converter-point absorbers. Renew Sustain Energy Rev 16:4352–4364

    Article  Google Scholar 

  29. Nagata S, Toyota K et al (2009) Numerical simulation for evaluation of primary energy conversion of floating OWC-type wave energy converter. In: Proceedings of the International offshore and polar engineering conference, Osaka, Japan, pp 300–307

  30. Hong DC, Hong SY, Hong SW (2004) Numerical study on the reverse drift force of floating BBDB wave energy absorbers. Ocean Eng 31:1257–1294

    Article  Google Scholar 

  31. Sun L, Taylor RE, Choo YS (2012) Multibody dynamic analysis of float-over installations. Ocean Eng 51:1–15

    Article  Google Scholar 

  32. Taghipour R, Arswendy A et al (2008) Structural analysis of a multibody wave energy converter in the frequency domain by interfacing WAMIT and ABAQUS. In: Proceedings of the international conference on offshore mechanics and arctic engineering—OMAE, No 1, pp 867–880

  33. Park JC, Uno Y et al (2004) Numerical reproduction of fully nonlinear multi-directional waves by a viscous 3D numerical wave tank. Ocean Eng 31:1549–1565

    Article  Google Scholar 

  34. Nader JR, Zhu SP et al (2012) A finite element study of the efficiency of arrays of oscillating water column wave energy converters. Ocean Eng 43:72–81

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical and Structural Engineering and Material Technology, University of Stavanger, 4036, Stavanger, Norway

    Hirpa G. Lemu

Authors
  1. Hirpa G. Lemu
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Hirpa G. Lemu.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Lemu, H.G. Advances in numerical computation based mechanical system design and simulation. Adv. Manuf. 3, 130–138 (2015). https://doi.org/10.1007/s40436-015-0110-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40436-015-0110-9

Keywords

Search

Navigation