Abstract
The ability to estimate and suppress part of the reflected energy from the structural boundaries in the received signal to obtain the reflections solely due to damage is explored. When the ultrasound transducer transmits a pulse into the structure to be interrogated, a reflected wave from the structural boundaries and/or damage is detected by the ultrasound receiver. In typical Lamb wave simulation practices, with a view to simplify the wave signal interpretations, effects of structural boundary reflections are often not considered. Although such Lamb wave simulation practices are effective in case of infinite plates, the same method is inapplicable in case of finite plates, because the effect of structural boundaries causes intricacies especially for transient response simulations. In this paper, a specific statistical method is used to model the reflections from structural boundaries. Indeed, this modeling is efficient in case of finite plates. Such a modeling can also be used to examine and suppress part of the reflected energy from the structural boundaries in received signal to procure the signal containing the reflections only due to damage. The proposed algorithm has been evaluated in both simulation and experimental tests on an 6061 aluminum plate with dimensions 300 mm × 300 mm × 3 mm. The tests yield considerable improvement in the accuracy of estimating the position of the flaw.
Similar content being viewed by others
References
Satyanarayan L, Sridhar C, Krishnamurthy C, Balasubramaniam K (2007) Simulation of ultrasonic phased array technique for imaging and sizing of defects using longitudinal waves. Int J Press Vessels Pip 84(12):716–729 (publisher Elsevier)
Su Z, Ye L, Bu X (2002) A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers. Compos Struct 57:465–471 (Elsevier Science Ltd.)
Michaels JE, Hall JS, Michaels TE (2009) Adaptive imaging of damage from changes in guided wave signals recorded from spatially distributed arrays. Proc SPIE 7295:729515
Dushyantha ND, Latte MV, Pamidighantam S (2012) Two dimensional spatial fusion technique for imaging of damages in plates using Lamb waves. In: Proceedings of third international conference on sensors and related networks (SENNET-12). VIT University, Vellore, pp 206–209
Auld BA (1990) Acoustic fields and waves in solids, 2nd ed, vols I and II. Krieger Publishing Company, Malabar
Zhang SY, Shen JZ, Ying CF (1988) The reflection of the Lamb wave by a free plate edge: visualization and theory. Mater Eval 46:638–641
Alleyne DN, Cawley P (1992) The interaction of Lamb waves with defects. IEEE Trans Ultrason Ferroelectr Freq Control 39(3):381–397
Kudela P, Żak A, Krawczuk M, Ostachowicz W (2007) Modelling of wave propagation in composite plates using the time domain spectral element method. J Sound Vib 302(4–5, 22):728–745
Galan JM, Abascal R (2002) Numerical simulation of Lamb wave scattering in semi-infinite plates. Int J Numer Methods Eng 53:1145–1173
Liu GR, Jerry SQ (2003) A non-reflecting boundary for analyzing wave propagation using the finite element method. Finite Elem Anal Des 39:403–417
Chonavel T (2001) Statistical signal processing: modelling and estimation. Springer, London
Abbate A, Koay J, Frankel J, Schroeder SC, Das P (1997) Signal detection and noise suppression using a wavelet transform signal processor: application to ultrasonic flaw detection. J IEEE 44:14–25
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dushyanth, N.D., Suma, M.N. & Latte, M.V. Mathematical modeling of Lamb wave scattering for structural health monitoring. J Civil Struct Health Monit 5, 743–749 (2015). https://doi.org/10.1007/s13349-015-0142-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13349-015-0142-7