Skip to main content
SpringerLink
Log in

Evaluation of Wear Properties for Ni–P Electroless Coatings

  • Technical Paper
  • Published:
Transactions of the Indian Institute of Metals Aims and scope Submit manuscript

Abstract

In this study, the Ni–P electroless single layer and the gradual phosphorus Ni–P coatings were deposited on copper substrates. The cross-section observations and the surface morphology were detected by using scanning electron microscopy and optical microscopy. The surface morphology was designed by Solid-Work software and the wear behavior of coatings was simulated under real conditions of the wear test by Deform software. The results showed that, the graded Ni–P coatings had a low strain, effective in the wear tracks and the damage during the wear tests were lower than the high phosphorus single layer. The graded Ni–P coatings had high wear resistance and the coating with the sequence of low P/medium P/high P layers from the substrate to the surface had the best wear resistance. By comparing the real situation of the wear and the wear simulation, it was concluded that the surface and wear modeling could be a reliable model.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17

Similar content being viewed by others

References

  1. He P, Huang S, Wang H, Huang Z, Hu J, and Cheng X, Coat Technol Res 40 (2014) 16653.

    Google Scholar 

  2. Beigi Khosroshahi N, Azari Khosroshahi R, Taherzadeh Mousavian R, and Brabazon D, Ceramics Int 40 (2014) 12149.

  3. Makkar P, Mishra D D, Agarwala R C, and Agarwala V, Ceramics Int 40 (2014) 12013.

    Article  Google Scholar 

  4. Franco M, Sha W, Malinov S, and Liu H, Wear 317 (2014) 254.

    Article  Google Scholar 

  5. Gadhari P, and Sahoo P, Proc Eng 97 (2014) 439.

    Article  Google Scholar 

  6. Gadhari P, Sahoo P, Proc Mat Sci 6 (2014) 623.

    Article  Google Scholar 

  7. Shu X, Wang Y, Liu C, Aljaafari A, and Gao W, Surf Coat Technol 261 (2015) 161.

    Article  Google Scholar 

  8. Zou Y, Cheng Y, Cheng L, and Liu W, Mat Trans 51 (2010) 277.

    Article  Google Scholar 

  9. Makkar P, Agarwala R C, and Agarwala V, Adv Powder Technol 25 (2014) 1653.

    Article  Google Scholar 

  10. Islam M, Azhar M R, Fredj N, Burleigh T D, Oloyede O R, and Almajid AA, Surf Coat Technol 261 (2015) 141.

    Article  Google Scholar 

  11. Wang Y, ShuX, Wei S, Liu C, Gao W, and Shakoor R A et al., Alloys Compd 630 (2015) 189.

    Article  Google Scholar 

  12. Ma C, Wu F, Ning Y, Xia F, and Liu Y, Ceramics Int, 40 (2014) 1.

    Article  Google Scholar 

  13. Karthikeyan S, and Ramamoorthy B, Appl Surf Sci, 307 (2015) 654.

    Article  Google Scholar 

  14. Vítů T, and Vojte D, Appl Surf Sci 256 (2010) 2956.

    Article  Google Scholar 

  15. Jiaqiang G, Yating W, Lei L, and Wenbin H, Mat Lett 59 (2005) 391.

    Article  Google Scholar 

  16. Novakovic J, Vassiliou P, Samara K, and Argyropoulos T, Surf Coat Technol 201 (2006) 895.

    Article  Google Scholar 

  17. Yu L, Huang W, and Zhao X, Alloys Compd 509 (2011) 4154.

    Article  Google Scholar 

  18. Bozzini B, Wear 225 (1999) 806.

    Article  Google Scholar 

  19. Wu Y, Liu H, Shen B, Liu L, and Hu W, Tribo Int 39 (2006) 553.

    Article  Google Scholar 

  20. Alirezaei S, Monirvaghefi SM, Salehi M, and Saatchi A, Wear 262 (2007) 978.

    Article  Google Scholar 

  21. Panja B, and Sahoo P, Proc Technol 14 (2014) 173.

    Article  Google Scholar 

  22. Chen X M, and Li G Y, Lian J S, Trans Nonferrous Met Soc China 18 (2008) 323.

    Article  Google Scholar 

  23. Kanani N, Electroplating—Basic Principles, Processes and Practice, Elsevier Ltd Publication, Berlin, (2005).

Download references

Author information

Authors and Affiliations

  1. Department of Materials Engineering, Shiraz University, Shiraz, Iran

    A. Hadipour & M. E. Bahrololoom

  2. Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran

    S. M. Monirvaghefi

  3. Department of Mechanical Engineering, Sarvestan Branch, Islamic Azad University, Sarvestan, Iran

    A. R. Bahramkia

Authors
  1. A. Hadipour
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. M. E. Bahrololoom
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. M. Monirvaghefi
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. A. R. Bahramkia
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to A. Hadipour.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Hadipour, A., Bahrololoom, M.E., Monirvaghefi, S.M. et al. Evaluation of Wear Properties for Ni–P Electroless Coatings. Trans Indian Inst Met 69, 1733–1743 (2016). https://doi.org/10.1007/s12666-016-0833-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12666-016-0833-8

Keywords

Search

Navigation