Abstract
This paper presents the influence of freeze–thaw cycles on physical and mechanical properties of Upper Red Formation sandstones in the southwestern Qom province in central Iran. For this purpose, five different types of sandstones were selected. Freeze–thaw test was carried out for 30 cycles and P wave velocity, porosity and uniaxial compressive strength of specimens were determined after every 5 cycles. Also, long-term durability of sandstones against freeze–thaw cycles using a decay function model was evaluated. The results of this study show that an increase in number of freeze–thaw cycles decreases uniaxial compressive strength and P wave velocity, whereas the effective porosity increases. The results obviously indicate that rock strength and petrographic properties such as grain size and contacts between grains alone does not provide enough information regarding sample durability against freeze–thaw cycles. Finally, it was found that pore size distribution plays the main role on the resistance of sandstones in freeze–thaw cycles.
Similar content being viewed by others
References
Akin M, Ozsan A (2011) Evaluation of the long-term durability of yellow travertine using accelerated weathering tests. Bull Eng Geol Environ 70:101–114
Altindag R, Alyildiz IS, Onargan T (2004) Mechanical properties degradation of ignimbrite subjected to recurrent freeze–thaw cycles. Int J Rock Mech Min Sci 41:1023–1028
Bell FG (2000) Engineering properties of soils and rocks, 4th edn. Blackwell Science, Oxford
Benavente D, García MA, Fort R, Ordóñez S (2004) Durability estimation of porous building stones from pore structure and strength. Eng Geol 74:113–127
Binal A, Kasapoglu KE (2002) Effects of freezing and thawing process on physical and mechanical properties of Selime ignimbrite outcrops in Aksaray–Ihlara valley [in Turkish] Proceeding of 6th Regional. Rock Mechanic Symposium. Konya-Turkey, pp. 189–196
Bögli A (1980) Karst hydrology and physical speleology. Springer, Berlin, 284 p
Chen TC, Yeung MR, Mori N (2004) Effect of water saturation on deterioration of welded tuff due to the freeze–thaw action. Cold Reg Sci Technol 38:127–136
Darvichzade A (1992) Geology of Iran (in Farsi). Neda publication, Tehran, 701 p
Folk RL (1974) Petrology of sedimentary rocks. Hemphill, Austin
Grossi CM, Brimblecombe P, Harris I (2007) Predicting long term freeze–thaw risks on Europe built heritage and archaeological sites in a changing climate. Sci Total Environ 377(2):273–281
Hale PA, Shakoor A (2003) A laboratory investigation of the effects of cyclic heating and cooling, wetting and drying, and freezing and thawing on the compressive strength of selected sandstones. Environ Eng Geosci 9:117–130
ISRM (1981) Rock characterization, testing and monitoring. In: Brown ET (ed) ISRM suggested methods. Pergamon Press, Oxford, 211 pp
Karaca Z, Deliormanli AH, Elci H, Pamukcu C (2010) Effect of freeze–thaw process on the abrasion loss value of stones. Int J Rock Mech Min Sci 47:1207–1211
Mutluturk M, Altidag R, Turk G (2004) A decay function model for the integrity loss of rock when subjected to recurrent cycles of freezing-thawing and heating–cooling. Int J Rock Mech Min Sci 41:237–244
Nicholson D (2001) Pore properties as indicators of breakdown mechanisms in experimentally weathered limestone. Earth Surf Process Land 26:819–838
Rossi D (1985) Laboratory tests on artistic stonework. Stu and doc cult herit 16:235–242
Ruedrich J, Siegesmund S (2007) Salt and ice crystallization in porous sandstones. Env Geol 52:225–249
Takarli M, Prince W, Siddique R (2008) Damage in granite under heating/cooling cycles and water freeze–thaw condition. Int J Rock Mech and Min Sci 45:1164–1175
Tamrakar NK, Yokota S, Shrestha SD (2003) Petrography of the Siwalik sandstones, Amlekhganj–Suparitar area, central Nepal Himalaya. J Nepal Geol Soc 28:41–56
Tan X, Chen W, Tian H, Cao J (2011) Laboratory investigations on the mechanical properties degradation of granite under freeze–thaw cycles. Cold Reg Sci Technol 68:130–138
Tavallali A, Vervoort A (2010) Failure of layered sandstone under Brazilian test conditions: effect of micro-scale parameters on macro-scale behavior. Rock Mech Rock Eng 43(5):641–653
Taylor JM (1950) Pore space reduction in sandstone. Bull Am Assoc Pet Geol 34:701–716
Topal T, Doyuran V (1998) Analyses of deterioration of the Cappadocian tuff, Turkey. Env Geol 34:5–20
Topal T, Sözmen B (2000 Freeze–thaw resistance of the Yazilikaya tuffs. 9th International Congress on the Deterioration and Conservation of Stone p. 275–281
Yavuz H, Altindag R, Sarac S, Ugur I, Sengun N (2006) Estimating the index properties of deteriorated carbonate rocks due to freeze–thaw and thermal shock weathering. Int J Rock Mech and Min Sci 43:767–775
Zhang SJ, Lai YM, Zhang XF, Pu YB, Yu WB (2004) Study on the damage propagation of surrounding rock from a cold-region tunnel under freeze–thaw cycle condition. Tunn Undergr Space Technol 19:295–302
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Khanlari, G., Sahamieh, R.Z. & Abdilor, Y. The effect of freeze–thaw cycles on physical and mechanical properties of Upper Red Formation sandstones, central part of Iran. Arab J Geosci 8, 5991–6001 (2015). https://doi.org/10.1007/s12517-014-1653-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12517-014-1653-y