Abstract
Chemically-processed clays (PRCs) by base and acid treatments were developed to effectively remove microalgae, and their removal efficiencies were evaluated and compared to that of natural clay. The processed clays were produced by using sodium hydroxide and different amounts of sulfuric acid, and their characteristics were analyzed. Microalgae removal efficiency of the clay was varied depending on the amount of sulfuric acid used in treatments. When adding 1 g/L of a PRC-D type (treated with 1.5 v/w sulfuric acid) to the Microcystis aeruginosa suspension (1 × 106 cells/mL), the highest removal performance (87.3 ± 1.5%) without significant pH variation of the suspension was found among tested PRCs, whereas that of natural clay was 32.1 ± 2.2%. Finally, when selected PRC-D showing best efficiency was applied to lake water taken at a local algae bloomed lake, it exhibited 77.6% removal efficiency of microalgae, indicating 1.7 times higher than the natural clay. The results suggest that processed clays in this study could contribute to effective removal of microalgae in the algal-bloomed area with minimal environmental impact.
Similar content being viewed by others
References
Kim, Z. H., H. Park, Y. J. Ryu, D. W. Shin, S. J. Hong, H.L. Tran, S. M. Lim, and C. G. Lee (2015) Algal biomass and biodiesel production by utilizing the nutrients dissolved in seawater using semi-permeable membrane photobioreactors. J. Appl. Phycol. 27: 1763–1773.
Kim, Z. H., H. Park, S. J. Hong, S. M. Lim, and C. G. Lee (2016) Development of a floating photobioreactor with internal partitions for efficient utilization of ocean wave into improved mass transfer and algal culture mixing. Bioprocess Biosyst. Eng. 39: 713–723.
Paerl, H. W. and J. Huisman (2008) Blooms like it hot. Science 320: 57–58.
Brooks, B. W., J. M. Lazorchak, M. D. Howard, M. V. V. Johnson, S. L. Morton, D. A. Perkins, E. D. Reavie, G. I. Scott, S. A. Smith, and J. A. Steevens (2016) Are harmful algal blooms becoming the greatest inland water quality threat to public health and aquatic ecosystems? Environ. Toxicol. Chem. 35: 6–13.
Li, Q., W. Hu, and S. Zhai (2016) Integrative indicator for assessing the alert levels of algal bloom in lakes: Lake Taihu as a case study. Environ. Manage. 57: 237–250.
Paerl, H. W. and T. G. Otten (2013) Harmful cyanobacterial blooms: Causes, consequences, and controls. Microb. Ecol. 65: 995–1010.
Sengco, M. R. and D. M. Anderson (2004) Controlling harmful algal blooms through clay flocculation. J. Eukaryot. Microbiol. 51: 169–172.
Guo, L. (2007) Doing battle with the green monster of Taihu Lake. Science 317: 1166–1166.
Li, L. and G. Pan (2013) A universal method for flocculating harmful algal blooms in marine and fresh waters using modified sand. Environ. Sci. Technol. 47: 4555–4562.
Park, T. G., W. A. Lim, Y. T. Park, C. K. Lee, and H. J. Jeong (2013) Economic impact, management and mitigation of red tides in Korea. Harmful Algae 30: S131–S143.
Hamdi, N. and E. Srasra (2012) Removal of phosphate ions from aqueous solution using Tunisian clays minerals and synthetic zeolite. J. Environ. Sci. 24: 617–623.
Liu, Y., X. Cao, Z. Yu, X. Song, and L. Qiu (2016) Controlling harmful algae blooms using aluminum-modified clay. Mar. Pollut. Bull. 103: 211–219.
Yu, J. J., K. L. Lee, H. J. Lee, J. W. Hwang, H. S. Lyu, L. Y. Shin, A. R. Park, and S. U. Chen (2015) Relations of nutrient concentrations on the seasonality of algal community in the Nakdong River, Korea. J. Kor. Soc. Water Environ. 31: 110–119.
Fukuyo, Y., I. Imai, M. Kodama, and K. Tamai (2002) Red tides and other harmful blooms in Japan. pp. 7–20. In: F. J. R., Taylor, and V. L. Trainer (eds.). Harmful Algal Blooms in the PICES Region of the North Pacific. PICES Scientific Report No. 23. North Pacific Marine Sci. Org. (PICES), Sidney, Canada.
Lee, Y. J., J. K. Choi, E. K. Kim, S. H. Youn, and E. J. Yang (2008) Field experiments on mitigation of harmful algal blooms using a Sophorolipid-Yellow clay mixture and effects on marine plankton. Harmful Algae 7: 154–162.
Han, M. Y. and W. Kim (2001) A theoretical consideration of algae removal with clays. Microchem. J. 68: 157–161.
Pan, G., L. Dai, L. Li, L. He, H. Li, L. Bi, and R. D. Gulati (2012) Reducing the recruitment of sedimented algae and nutrient release into the overlying water using modified soil/sand flocculation-capping in eutrophic lakes. Environ. Sci. Technol. 46: 5077–5084.
Li, L., H. Zhang, and G. Pan (2015) Influence of zeta potential on the flocculation of cyanobacteria cells using chitosan modified soil. J. Environ. Sci. 28: 47–53.
Priscila, F., Z. M. Magriotis, M. A. Rossi, R. F. Resende, and C. A. Nunes (2013) Optimization by response surface methodology of the adsorption of Coomassie Blue dye on natural and acidtreated clays. J. Environ. Manage. 130: 417–428.
Panda, A. K., B. Mishra, D. Mishra, and R. Singh (2010) Effect of sulphuric acid treatment on the physico-chemical characteristics of kaolin clay. Colloids Surf. A Physicochem. Eng. Asp. 363: 98–104.
Yoon, M. Y., S. Lee, J. H. Choo, H. Jang, W. Cho, H. Kang, and J. K. Park (2016) Economical synthesis of complex silicon fertilizer by unique technology using loess. Kor. J. Chem. Eng. 33: 958–963.
Cook, H., P. Johnson, J. Matti, and I. Zemmels (1975) IV. Methods of Sample Preparation, and X-ray Diffraction Data Analysis, X-ray Mineralogy Laboratory, Deep Sea Drilling Project, University of California, Riverside. Institute of Geophysics and Planetary Physics, University of California, Riverside, Contribution No. 74-5. Initial reports of the deep sea drilling project. 25.
Madejová, J. (2003) FTIR techniques in clay mineral studies. Vibrat. Spectrosc. 31: 1–10.
André, R., A. Jardani, P. Sava, and A. Haas (2015) The Seismoelectric Method: Theory and Application. pp. 2–3. John Wiley & Sons, NY, USA.
Comm, A. L. A. and Ohio River Valley Sanitation Commission (1955) Aquatic life water quality criteria. First progress report. Sewage Ind. Waste 27: 321–331.
Qian, F., D. R. Dixon, G. Newcombe, L. Ho, J. Dreyfus, and P. J. Scales (2014) The effect of pH on the release of metabolites by cyanobacteria in conventional water treatment processes. Harmful Algae 39: 253–258.
Pan, G., H. Zou, H. Chen, and X. Yuan (2006) Removal of harmful cyanobacterial blooms in Taihu Lake using local soils III. Factors affecting the removal efficiency and an in situ field experiment using chitosan-modified local soils. Environ. Pollut. 141: 206–212.
Chatsungnoen, T. and Y. Chisti (2016) Harvesting microalgae by flocculation–sedimentation. Algal Res. 13: 271–283.
Srivastava, A., C. Y. Ahn, R. K. Asthana, H. G. Lee, and H. M. Oh (2015) Status, alert system, and prediction of cyanobacterial bloom in South Korea. Biomed Res. Int. 2015: 584696.
Pan, G., B. Yang, D. Wang, H. Chen, B.-H. Tian, M.-L. Zhang, X.-Z. Yuan, and J. Chen (2011) In-lake algal bloom removal and submerged vegetation restoration using modified local soils. Ecol. Eng. 37: 302–308.
Kann, J. and V. H. Smith (1999) Estimating the probability of exceeding elevated pH values critical to fish populations in a hypereutrophic lake. Can. J. Fish. Aquat. Sci. 56: 2262–2270.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, ZH., Thanh, N.N., Yang, JH. et al. Improving microalgae removal efficiency using chemically-processed clays. Biotechnol Bioproc E 21, 787–793 (2016). https://doi.org/10.1007/s12257-016-0655-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12257-016-0655-x