Abstract
Nowadays the typical method of dynamics analysis of vehicle stability is based on the nonlinear vehicle model deriving from the classic two degrees of freedom (2DOF) linear vehicle model. The features of system stability are obtained by phase space analysis, state variables analysis and so on. But these conclusions are drawn under the assumption that the driving mode effect on vehicle stability is neglected in vehicle model. In fact, there are strikingly obvious stability differences between front-wheel-drive vehicle and rear-wheel-drive vehicle at the high speed. Aiming at the above problem, this paper has investigated effect of driving mode on vehicle stability. A uniform slip equation of tyre longitudinal slip is proposed. The uniform slip equation guarantees both the calculation validity and the simulation convenience. Based on the uniform slip equation and Magic Tyre Formula, a 5DOF (longitudinal velocity, lateral velocity, yaw rate, front wheel rotational velocity and rear wheel rotational velocity) planar motion nonlinear dynamics vehicle system model is established under the consideration of driving mode. Many simulations are carried out on the basis of the 5DOF nonlinear mechanical vehicle model with different driving modes and different front steering angles respectively. The simulation results, including system globe phase portraits, system state variables, vehicle tracks and tyre force distributions, show that the driving mode has great effects on vehicle stability. The present vehicle models without considering driving mode fail to estimate the system stability region exactly.
Similar content being viewed by others
References
Ahn, C., Kim, B. and Lee, M. (2012). Modeling and control of an anti-lock brake and steering system for cooperative control on split-mu surfaces. Int. J. Automotive Technology 13,4, 571–581.
Inagaki, S., Kshiro, I. and Yamamoto, M. (1994). Analysis of vehicle stability in critical cornering using phase plane method. SAE Paper No. 943841.
Khalil, H. K. (2002). Nonlinear Systems. 3rd edn. Prentice Hall. New Jersey.
Kiencke, U. and Nielsen, L. (2000). Automotive Control Systems. Springer. New York.
Ko, Y. E. and Lee, J. M. (2002). Estimation of the stability region of a vehicle in plane motion using a topological approach. Int. J. Vehicle Design 30,3, 181–192.
Ko, Y. E. and Song, C. K. (2010). Vehicle modeling with nonlinear tires for vehicle stability analysis. Int. J. Automotive Technology 11,3, 339–344.
Liu, L. (2010). Nonlinear Analysis and Control Strategy Evaluation on the Stability of Vehicle 3-DOF Planar Motion. D. Dissertation. Jilin University. Changchun. China.
Liu, L., Shi, S., Shen, S. and Chu, J. (2010). Vehicle planar motion stability study for tyres working in extremely nonlinear region. Chinese J. Mechanical Engineering 23,2, 185–194.
Mitschke, M. and Wallentowitz, H. (2009). Dynamik der Kraftfahrzeuge 4. Auflage. Translated by Chen, Y. and Yu, Q., Tsinghua University Press. Beijing (in Chinese).
Nguyen, V. (2005). Vehicle Handling, Stability, and Bifurcation Analysis for Nonlinear Vehicle Models. M.S. Thesis. University of Maryland. Washington D C. USA.
Pacejka, H. B. (2006). Tyre and Vehicle Dynamic. Butterworth-Heinemann. Oxford.
Wang, X., Shi, S. and Jin, L. (2011). Modeling and analysis on effect of driving force for vehicle stability. Proc. 2011 Int. Conf. Transportation and Mechanical & Electrical Engineering, Changchun, China, 1927–1930.
Yu, F. and Lin, Y. (2005). Vehicle System Dynamics. China Machine Press. Beijing. (in Chinese)
Yu, Z. (2007). Vehicle Theory. 4th edn. China Machine Press, Beijing. (in Chinese).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, X., Shi, S., Liu, L. et al. Analysis of driving mode effect on vehicle stability. Int.J Automot. Technol. 14, 363–373 (2013). https://doi.org/10.1007/s12239-013-0040-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-013-0040-0