Abstract
In this study, the amino silane coupling agent (KH550)-modified SrAl204: Eu2+, Dy3+ phosphor powder coated with phenolic epoxy resin (EOCN) in the presence of triarylsulfonium hexafluoroantimonate catalyst was prepared using the combination of organic–inorganic composite dip-coating and UV curing coating methods. The results of SEM, TEM, and FTIR showed that the organic coating was a layer of compact membrane with a thickness of 20–50 nm, which can be named silane-modified epoxy monomer generated by the KH550 and the EOCN. Furthermore, it was observed that afterglow and spectrum properties of the coated phosphor powder had good long-afterglow luminescence properties, and revealed two emission peaks at 435 nm and 520 nm under the same excitation wavelength of 360 nm, respectively. More interesting, the emitting color of the coated sample was located in the area of cyan light on CIE1931 chromaticity diagram, which led to a slight blue shift rather than the yellow–green color of the pure SrAl204: Eu2+, Dy3+ phosphor powder.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Yan, YH, Ge, MQ, “Morphology and Spectral Characteristics of a Luminous Fiber Containing a Rare Earth Strontium Aluminate.” Text. Res. J., 82 1819–1826 (2012)
Van Duynhoven, DM, “Tintable luminescent paint.” US Patent 6,359,048,2002
Zhang, JS, Ge, MQ, “Effects of Transparent Inorganic Pigment on Spectral Properties of Spectrum-Fingerprint Anticounterfeiting Fiber Containing Rare Earths.” J. Rare Earths., 30 952–957 (2012)
Guo, XF, Ge, MQ, “The Afterglow Characteristics and Trap Level Distribution of Chromatic Rare-Earth Luminous Fiber.” Text. Res. J., 83 1263–1272 (2013)
Kshatri, DS, Khare, A, “Characterization and Optical Properties of Dy3+ Doped Nanocrystalline SrAl2O4: Eu2+ Phosphor.” J. Alloy. Compd., 588 488–495 (2014)
Dubey, V, Kaur, J, Agrawal, S, Suryanarayana, NS, Murthy, KVR, “Synthesis and Characterization of Eu3+ Doped SrY2O4 Phosphor.” Optik, 124 5585–5587 (2013)
Carlson, S, Hölsä, J, Laamanen, T, Lastusaari, M, Malkamäki, M, Niittykoski, J, Valtonen, R, “X-ray Absorption Study of Rare Earth Ions in Sr2MgSi2O7: Eu2+, R3+ Persistent Luminescence Materials.” Opt. Mater., 12 1877–1879 (2009)
Zhang, J, Zhang, Z, Tang, Z, Wang, T, “Hydrolysis Mechanism and Method to Improve Water Resistance of Long-After-Glow Phosphor.” Mater. Sci. Forum., 423–425 147 (2003)
Zhang, ZT, Zhang, JY, Peng, JS, Tang, ZL, Lin, YH, “The Preparation Method of the Aluminate Phosphors.” Beijing Patent CN1,334,309,2002
Shen, XZ, Jin, MH, “In-Situ Polymeric Modification of Methyl Acrylic Acid to Surface of Nano SiO2 Particle.” Chin. J. Appl. Chem., 10 1003–1005 (2003)
Yuan, SJ, “The Preparation of Coated Phosphor Powder and Long Afterglow Fluorescent Coating with the Coated Powder.” Dalian Patent CN 01,114,025.9,2001
Yue, LH, Xie, WH, Shui, M, Xu, ZD, “The Study of Mechanism and Surface Properties for the Polyacrylic Acid Coated with Super-Fine Calcium Carbonate.” Acta. Chim. Sin., 7 1156–1161 (2002)
Han, S, Yoon, HG, Kim, WG, Moon, TJ, “Cure Kinetics of Biphenyl Epoxy-Phenol No-Volac Resin System Using Triphenylphosphineascatalyst.” J. Polym. Sci. Part. A. Polym. Chem., 37 713–720 (1999)
Ghaemy, M, Khandani, MH, “Kinetics of Curing Reaction of DGEBA with BF3-aminecomplexes using Isothermal DSC Technique.” Eur. Polym. J., 34 477–486 (1998)
Abgrall, P, Conedera, V, Camon, H, Gue, A, Nguyen, N, “SU-8 as a Structural Material for Labs-on-Chips and Microelectromechanical Systems.” Electrophoresis., 28 4539–4551 (2007)
Pai, J, Wang, Y, Salazar, GT, Sims, CE, Bachman, M, Li, GP, Allbritton, NL, “Photoresist with Low Fluorescence for Bioanalytical Applications.” Anal. Chem., 79 8774–8780 (2007)
Desai, SP, Taff, BA, Voldman, J, “A Photopatternable Silicone for Biological Applications.” Langmuir, 24 575–581 (2008)
Sipani, V, Scranton, AB, “Dark-Cure Studies of Cationic Photopolymerizations of Epoxides: Characterization of the Active Center Lifetime and Kinetic Rate Constants.” J. Polym. Sci. Pol. Chem., 41 2064–2072 (2003)
Sangermano, M, Malucelli, G, Morel, F, Decker, C, Priola, A, “Cationic Photopolymerization of Vinyl Ether Systems: Influence of the Presence of Hydrogen Donor Additives.” Eur. Polym. J., 35 639–645 (1999)
Boey, F, Rath, SK, Ng, AK, Abadie, MJM, “Cationic UV Cure Kinetics for Multifunctional Epoxies.” J. Appl. Polym. Sci., 86 518–525 (2002)
Cho, JD, Hong, JW, “UV-Initiated Free Radical and Cationic Photopolymerizations of Acrylate/Epoxide and Acrylate/Vinyl Ether Hybrid Systems With and Without Photosensitizer.” J. Appl. Polym. Sci., 93 1473–1483 (2004)
Wang, T, Ma, LJ, Wan, PY, Liu, JP, Wang, F, “A Study of the Photoactivities and Thermomechanical Properties of Epoxy Resins Using Novel [cyclopentadien-Fe-arene]+ PF6 − Photoinitiators.” J. Photochem. Photobiol., 163 77–86 (2004)
Yoshihisa, S, Atsushi, S, “Profile Simulation of SU-8 Thick Film Resist.” J. Photopolym. Sci. Tech., 5753 1170–1185 (2005)
Guo, XF, Ge, MQ, Zhao, JM, “Photochromic Properties of Rare-Earth Strontium Aluminate Luminescent Fiber.” Fiber Polym., 12 875–879 (2011)
Acknowledgments
The authors gratefully acknowledge the Fundamental Research Funds for the Central Universities (Key Projects of Scientific Research Plan, No. JUSRP51505), the University Graduate Student (Scientific Research Innovation Projects, No. KYLX15_1162), and National Natural Science Foundation of China (No. 51503082).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, J., Ge, M., Zhu, Y. et al. Morphology and photoluminescence properties of phenolic epoxy resin coating on KH550-modified SrAl2O4: Eu2+, Dy3+ powder in the presence of triarylsulfonium hexafluoroantimonate. J Coat Technol Res 13, 1075–1082 (2016). https://doi.org/10.1007/s11998-016-9826-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-016-9826-0