Erratum to: JOM, Vol. 67, No. 3, 2015 DOI: 10.1007/s11837-014-1273-8
The authors regret the errors in Table II. An older version of the table was mistakenly submitted for publication and all values have been updated.
Line number 18 of the section “Microstructure/Microhardness” should read as follows:
When the bars were stress relieved at 593.33°C, the melt pool boundaries were visible (Figs. 7b and c, and 8b and c).
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found under doi:10.1007/s11837-014-1273-8.
Rights and permissions
About this article
Cite this article
Jelis, E., Clemente, M., Kerwien, S. et al. Erratum to: Metallurgical and Mechanical Evaluation of 4340 Steel Produced by Direct Metal Laser Sintering. JOM 67, 1214–1215 (2015). https://doi.org/10.1007/s11837-015-1368-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-015-1368-x