Abstract
Chemical enhanced oil recovery methods are field proven techniques that improve efficiency and effectiveness of oil recovery. We have synthesized polymeric surfactant from vegetable oil (castor oil) for application in chemical enhanced oil recovery. First, an eco-friendly surfactant, sodium methyl ester sulfonate (SMES) was synthesized from castor oil, and then the polymeric surfactant (PMES) was produced by graft co-polymerization reaction using different surfactant to acrylamide ratios. The synthesized PMES was characterized by FTIR, FE-SEM, EDX, TGA, DLS analysis. The performance of PMES as a chemical agent for enhanced oil recovery was studied by measuring the interfacial tension (IFT) between crude oil and PMES solution, rheological behavior and contact angle against sandstone surface. Addition of sodium chloride in PMES solution reduced the IFT to an ultra-low value (2.0×10-3mN/m). Core flooding experiments were conducted in sandpack system, and 26.5%, 27.8% and 29.1% additional recovery of original oil in place (OOIP) was obtained for 0.5, 0.6 and 0.7mass% of PMES solutions, respectively, after conventional water flooding.
Similar content being viewed by others
References
A. Samanta, K. Ojha, A. Sarkar and A. Mandal, Int. J. Oil Gas Coal Tech., 6, 245 (2013).
B. S. Shiran and A. Skauge, Energy Fuels, 27, 1223 (2013).
Z. Guo, M. Dong, Z. Chen and J. Yao, Ind. Eng. Chem. Res., 52, 911 (2013).
M. Ko, B. H. Chon, S. B. Jang and H.Y. Jang, J. Ind. Eng. Chem., 20, 228 (2014).
Y. Bai, C. Xiong, X. Shang and Y. Xin, Energy Fuels, 28, 1829 (2014).
A. Bera, B. B. Guha and A. Mandal, J. Chem. Eng. Data, 59, 89 (2014).
A. Bera, K. Ojha, T. Kumar and A. Mandal, Energy Fuels, 26, 3634 (2012).
D.W. Green and G.P. Willhite, Enhanced Oil Recovery, SPE (1998).
S. Mishra, A. Bera and A. Mandal, J. Pet. Eng., Article ID 395857, 1 (2014).
R. N. Healy and R. L. Reed, Soc. Pet. Eng. J., 14, 491 (1974).
A. Samanta, K. Ojha, A. Sarkar and A. Mandal, Adv. Petrol. Explor. Dev., 2, 13 (2011).
K.A. Elraies, I.M. Tan, M.T. Fathaddin and A. Abo-Jabal, Petrol. Sci. Technol., 29, 1521 (2011).
Y. Cao and H. Li, Eur. Polym. J., 38, 1457 (2002).
S. Liu and S. P. Armes, Curr. Opin. Colloid Interface Sci., 6, 249 (2001).
L. Ye, R. Huang, J. Wu and H. Hoffmann, Colloid. Polym. Sci., 282, 305 (2004).
J. Xu, L. H. Shi and M. L. Ye, J. Polym. Sci. Part B., 35, 827 (1997).
K.A. Elraies, I.M. Tan, M. Awang and I. Saaid, Petrol. Sci. Technol., 28, 1799 (2010).
H. Jamshidi and A. Rabiee, Adv. Mat. Sc. Eng., Article ID 728675, 1 (2014).
R. Das, D. Das, P. Ghosh, A. Ghosh, S. Dhara, A.B. Panda and S. Pal, Cellulose, 22, 313 (2015).
S. Pal, T. Nasim, A. Patra, S. Ghosh and A.B. Panda, Int. J. Biological Macromolecules, 47, 623 (2010).
C. M. Setty, A. S. Deshmukh and A. M. Badiger, Int. J. Biological Macromolecules, 67, 28 (2014).
B. S. Mitchell, An Introduction to Materials Engineering and Science for Chemical and Materials Engineers, Wiley, Hoboken, New Jersey (2004).
F. Rodriguez. Principle of Polymer Systems, 2nd Ed., McGraw-Hill (1982).
A. Bera, K. Ojha, T. Kumar and A. Mandal, Fuel, 121, 198 (2014).
R. M. Silverstein, F. X. Webster and D. J. Kiemle, Spectrometric Identification of Organic Compounds, John Wiley & Sons, Inc. (2005).
S. Carlino, M. J. Hudson, J. Solid State Ionics, 110, 153 (1998).
F. Prinetto, G. Ghiotti, P. Graffin and D. Tichit, Micropor. Mesopor. Mater., 39, 229 (2000).
L. S. Shi, React. Func. Polym., 45, 85 (2000).
A. Munin and F. Edwards-Lévy, Pharmaceutics, 3, 793 (2011).
Y. Barakat, I.K. Basily, A. Mohammad and A.M. Youssef, Brit. Polym. J., 21, 459 (1989).
M. Alexandre and P. Dubois, Mat. Sci. Eng. R., 28, 1 (2000).
H.U. Kim and K. H. Lim, Bull. Korean Chem. Soc., 25, 382 (2004).
A. J. Prosser and E. I. Franses, Colloids Surf., A: Physicochem. Eng. Aspects, 178, 1 (2001).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Babu, K., Pal, N., Saxena, V.K. et al. Synthesis and characterization of a new polymeric surfactant for chemical enhanced oil recovery. Korean J. Chem. Eng. 33, 711–719 (2016). https://doi.org/10.1007/s11814-015-0186-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-015-0186-8