Skip to main content
SpringerLink
Log in

Synthesis and characterization of polyurethane based on aliphatic diisocyanate and stiff chain extenders

  • Polymer, Industrial Chemistry
  • Published:
Korean Journal of Chemical Engineering Aims and scope Submit manuscript

Abstract

The present research work was performed to study the properties of polyurethanes (PU) based on aliphatic diisocayanate and the effect of chemical structure of chain extenders. Two series of PUs were synthesized via two steps polymerization technique. The PU samples constituted on hexamethylene diisocayanate (HDI), hydroxy-terminated polybutadiene (HTPB) and blends 1, 4 butanediol (BDO)/bisphenol A (BPA) and or 1, 4 butanediol (BDO)/ bisphenol S (BPS) were prepared. Structural characterization was done using Fourier transform infrared spectroscopy during and after the synthesis. The FTIR analysis confirmed the existence of proposed bisphenol A (BPA) and bisphenol S (BPS) based PU structures. Differential scanning calorimeter (DSC) analysis gives information about the thermal transition of all the polymer samples. Because of the difference of polarity between hard and soft segments of PU, microphase separation can occur. The degree of phase separation in the prepared PU was confirmed using scanning electron microscope (SEM) technique. The SEM techniques present a distinctive chance to directly visualize the morphology of the polyurethanes.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. G. Avar, U. Meier-Westhues, H. Casselmann and D. Achten, Polymers for a Sustainable Environment and Green Energy, 10, 411 (2012).

    Google Scholar 

  2. K. M. Zia, M. Barikani, I. A. Bhatti, M. Zuber and H. N. Bhatti, J. Appl. Polym. Sci., 109, 1840 (2008).

    Article  CAS  Google Scholar 

  3. M. Rogulska, W. Podkoscielny, A. Kultys, S. Pikus and E. Pozdzik, Eur. Polym. J., 42, 1786 (2006).

    Article  CAS  Google Scholar 

  4. K. M. Zia, M. Zuber, M. Barikani, I. A. Bhatti and M. A. Sheikh, J. Appl. Polym. Sci., 113, 2843 (2009).

    Article  CAS  Google Scholar 

  5. K.M. Zia, M. Barikani, M. Zuber, I.A. Bhatti and H.N. Bhatti, Iran Polym. J., 17, 61 (2008).

    CAS  Google Scholar 

  6. S.D. Seul, J. M. Lim, S. H. Ha and Y. H. Kim, Korean J. Chem. Eng., 22, 745 (2005).

    Article  CAS  Google Scholar 

  7. K. M. Zia, I. A. Bhatti, M. Barikani, M. Zuber and Islam-ud-Din, Appl. Surf. Sci., 254, 6754 (2008).

    Article  CAS  Google Scholar 

  8. Y. Choe, S. Park, W. Kim and D. Park, Korean J. Chem. Eng., 22, 750 (2005).

    Article  CAS  Google Scholar 

  9. T.-J. Yim, S.Y. Kim and K.-P. Yoo, Korean J. Chem. Eng., 19, 159 (2002).

    Article  CAS  Google Scholar 

  10. K.-H. Yeon, J.-H. Song and S.-H. Moon, Korean J. Chem. Eng., 21, 867 (2004).

    Article  CAS  Google Scholar 

  11. M. Barikani, K. M. Zia, I. A. Bhatti, M. Zuber and H.N. Bhatti, Carbohyd. Polym., 74, 621 (2008).

    Article  CAS  Google Scholar 

  12. K. M. Zia, M. Zuber, M. Barikani, I. A. Bhatti and M.B. Khan, Colloids Surf., B., 72, 248 (2009).

    Article  CAS  Google Scholar 

  13. K. M. Zia, I. A. Bhatti, M. Barikani, M. Zuber and M. A. Sheikh, Int. J. Biol. Macromol., 43, 136 (2008).

    Article  CAS  Google Scholar 

  14. K. M. Zia, M. Barikani, I. A. Bhatti, M. Zuber and H. N. Bhatti, J. Appl. Polym. Sci., 110, 769 (2008).

    Article  CAS  Google Scholar 

  15. M.R. Kaiser, B. Hazleen, Anuar, B. Noorasikin, Samat, B. Shamsul and A. Razak, Iran. Polym. J., 22, 123 (2013).

    Article  CAS  Google Scholar 

  16. M. Abbasian, M. Shahparian, S. Esmaeily and S. Bonab, Iran Polym. J., 22, 209 (2013).

    Article  CAS  Google Scholar 

  17. M. Zuber, K.M. Zia, S. Mahboob, M. Hassan and I.A. Bhatti, Int. J. Biol. Macromol., 47, 196 (2010).

    Article  CAS  Google Scholar 

  18. K. M. Zia, M. Zuber, M. Barikani, A. Jabbar and M. K. Khosa, Carbohyd. Polym., 80, 540 (2010).

    Google Scholar 

  19. S. Opera, S. Vlad and A. Stanciu, Euro. Polym. J., 36, 2409 (2000).

    Article  Google Scholar 

  20. K. M. Zia, M. Barikani, M. Zuber, I. A. Bhatti and H. N. Bhatti, Iran. Polym. J., 17(1), 61 (2008).

    CAS  Google Scholar 

  21. H.D. Kim, J. H. Huh, E.Y. Kim and C.C. Park, J. Appl. Polym. Sci., 69, 1349 (1998).

    Article  CAS  Google Scholar 

  22. J. T. Koberstein and R. S. Stein, J. Polym. Sci. B., 21(10), 2181 (1983).

    CAS  Google Scholar 

  23. K. C. Frish and D. Klempner, Basel: Technomic Publishing AG., 13, 15 (1996).

    Google Scholar 

  24. Y.A. Demchenko, M. Studenovsky, Z. Sedlakova, I. Sloufova, J. Baldrian and M. Ilavsky, Euro. Polym. J., 39, 437 (2003).

    Article  CAS  Google Scholar 

  25. M. Barikani and M. Barmer, Iran Polym. J., 5, 231 (1996).

    CAS  Google Scholar 

  26. J. L. Hu and S. Mondal, Polym. Int., 54, 764 (2005).

    Article  CAS  Google Scholar 

  27. M. Barikani and C. Hepburn, Cell. Polym., 5, 169 (1986).

    CAS  Google Scholar 

  28. Y. Liu, Z. Yue and J. Gao, Polym., 51, 3722 (2010).

    Article  CAS  Google Scholar 

  29. M. Fiayyaz, K.M. Zia, M. Zuber, T. Jamil, M.K. Khosa and M.A. Jamal, Korean J. Chem. Eng., 31, 644 (2014).

    Article  CAS  Google Scholar 

  30. D. J. Liaw, J. Appl. Polym. Sci., 66, 1251 (1997).

    Article  CAS  Google Scholar 

  31. D. J. Liaw, C.C. Huang and B.Y. Liaw, Polymer, 39, 3529 (1998).

    Article  CAS  Google Scholar 

  32. F. Mumtaz, M. Zuber, K.M. Zia, T. Jamil and R. Hussain, Korean J. Chem. Eng., 30, 259 (2013).

    Article  Google Scholar 

  33. F. Askari, M. Barikani and M. Barmar, Korean J. Chem. Eng., 30, 2093 (2013).

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Institute of Chemistry, Government College University, Faisalabad, 38030, Pakistan

    Mohammad Zuber, Khalid Mahmood Zia & Muhammad Ashair Iqbal

  2. Department of Chemistry, Government College for Woman Peoples Colony, Faisalabad, Pakistan

    Zahida Tariq Cheema

  3. Department of Chemistry, Quaid-i-Azam University, Islamabad, Pakistan

    Muhammad Ishaq

  4. Department of Polymer Engineering and Technology, Punjab University, Lahore, Pakistan

    Tahir Jamil

Authors
  1. Mohammad Zuber
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Khalid Mahmood Zia
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Muhammad Ashair Iqbal
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Zahida Tariq Cheema
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Muhammad Ishaq
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Tahir Jamil
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Mohammad Zuber.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zuber, M., Zia, K.M., Iqbal, M.A. et al. Synthesis and characterization of polyurethane based on aliphatic diisocyanate and stiff chain extenders. Korean J. Chem. Eng. 32, 184–190 (2015). https://doi.org/10.1007/s11814-014-0196-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11814-014-0196-y

Keywords

Search

Navigation