Abstract
Offshore jacket-type platforms are attached to the seabed by long batter piles. In this paper, results from a finite element analysis, verified against experimental data, are used to study the effect of the pile’s inclination angle, and its interaction with the geometrical properties of the pile and the geotechnical characteristics of the surrounding soil on the behavior of the inclined piles supporting the jacket platforms. Results show that the inclination angle is one of the main parameters affecting the behavior of an offshore pile. We investigated the effect of the inclination angle on the maximum von Mises stress, maximum von Mises elastic strain, maximum displacement vector sum, maximum displacement in the horizontal direction, and maximum displacement in the vertical direction. The pile seems to have an operationally optimal degree of inclination of approximately 5°. By exceeding this value, the instability in the surrounding soil under applied loads grows extensively in all the geotechnical properties considered. Cohesive soils tend to display poorer results compared to grained soils.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Al-Obaid YF, 1986. Numerical analysis of the laterally loaded piles in the Kuwait offshore environment. Ocean Engineering, 13(1), 85–92. DOI: 10.1016/0029-8018(86)90005-3
Asgarian B, Lesani M, 2009. Pile-soil-structure in pushover analysis of jacket offshore platforms using fiber elements. Journal of Construction Steel Research, 65(1), 209–218. DOI: 10.1016/j.jcsr.2008.03.013
ASTM A36, 2014. Standard specification for carbon structural steel. ASTM International, Conshohocken, USA, Designation A 36/A 36M-97a, 46 CFR 160.035-3(b) (2). DOI: 10.1520/A0036_A0036M-14
Bao Q, Feng H, 2011. Finite element simplified fatigue analysis method for a non-tubular joint of an offshore jacket platform. Journal of Marine Science and Application, 10(3), 321–324. DOI: 10.1007/s11804-011-1075-0
Chen Y, Gu M, Chen R, Kong L, Zhang Z, Bian X, 2015. Behavior of pile group with elevated cap subjected to cyclic lateral loads. China Ocean Engineering, 29(4), 565–578. DOI: 10.1007/s13344-015-0039-6
Eicher JA, Guan H, Jeng DS, 2003. Stress and deformation of offshore piles under structural and wave loading. Ocean Engineering, 30(3), 369–385. DOI: 10.1016/S0029-8018(02)00031-8
El-Din MN, Kim J, 2014. Sensitivity analysis of pile-founded fixed steel jacket platforms subjected to seismic loads. Ocean Engineering, 85(1), 1–11. DOI: 10.1016/j.oceaneng.2014.04.008
Ferrante AJ, Valenzula EC, Ellwanger GB, 1980. An integrated computational procedure for the analysis of offshore structures supported by piles. Advanced Engineering Software, 2(4), 169–172. DOI: 10.1016/0141-1195(80)90050-9
Helwany S, 2007. Applied soil mechanics with Abaqus applications. John Wiley & Sons, Hoboken Incorporation, Hoboken, USA, 60–64.
Korzani MG, Aghakouchak AA, 2015. Soil-structure interaction analysis of jack-up platforms subjected to monochrome and irregular waves. China Ocean Engineering, 29(1), 65–80. DOI: 10.1007/s13344-015-0005-3
Liang H, 2009. Review of research on interactions between deepwater steel catenary risers and soft clay seabeds. Journal of Marine Science and Application, 8(1), 163–167. DOI: 10.1007/s11804-009-8115-z
Mao D, Zhong C, Zhang L, Chu G, 2015. Dynamic response of offshore jacket platform including foundation degradation under cyclic loadings. Ocean Engineering, 100(1), 35–45. DOI: 10.1016/j.oceaneng.2015.03.012
Memarpour MM, Kimiaei M, Shayanfar M, Khanzadi M, 2012. Cyclic lateral response of pile foundations in offshore platforms. Computers and Geotechnics, 42(1), 180–192. DOI: 10.1016/j.compgeo.2011.12.007
Nazir A, Nasr A, 2014. Pullout capacity of batter pile in sand. Journal of Advanced Research, 4(2), 147–154. DOI: 10.1016/j.jare.2012.04.001
Pan X, Zhang Z, 2009. Analyzing the safety of removal sequences for piles of an offshore jacket platform. Journal of Marine Science and Application, 8(4), 311–315. DOI: 10.1007/s11804-009-8050-z
Sangseom J, Donghee S, Youngho K, 2009. Numerical analysis of passive pile groups in offshore deposits. Computers and Geotechnics, 36(7), 1164–1175. DOI: 10.1016/j.compgeo.2009.05.003
Sangseom J, Youngho K, Jaeyoung K, 2011. Influence on lateral rigidity of offshore piles using proposed p-y curves. Ocean Engineering, 38(2-3), 397–408. DOI: 10.1016/j.oceaneng.2010.11.007
Ruiz SE, 1984. Reliability index for offshore piles subjected to bending. Structural Safety, 2(2), 83–90. DOI: 10.1016/0167-4730(84)90012-2
Yu Hao, Li Xiaoyu, Yang Shuguang, 2012. Dynamic analysis method of offshore jack-up platforms in regular and random waves. Journal of Marine Science and Application, 11(1), 111–118. DOI: 10.1007/s11804-012-1112-7
Zou X, Zhao M, 2013. Axial bearing behavior of super-long piles in deep soft clay over stiff layers. Journal of Central South University of Technology, 20(7), 2008–2016. DOI: 10.1007/s11771-013-1702-9
Zou X, Zhao M, Liu G, 2007. Buckling analysis of super-long rock-socketed filling piles in soft soil area by element free Galerkin method. Journal of Central South University of Technology, 14(6), 858–863. DOI: 10.1007/s11771-007-0163-4
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Aminfar, A., Ahmadi, H. & Aminfar, M.H. Parametric study on the effects of pile inclination angle on the response of batter piles in offshore jacket platforms. J. Marine. Sci. Appl. 15, 193–200 (2016). https://doi.org/10.1007/s11804-016-1355-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11804-016-1355-9