Abstract
Processing conditions, ingredient ratio, and moisture content were optimized for making soy protein/starch based plastics using a twin-screw extruder and an injection molding machine. A metering pump and a high speed mixer were used for ingredient mixing. The optimal processing temperature for injection molding was 130°C, and the moisture content of extruded pellets was 10–14%. Processing effects were investigated by measuring the tensile properties and water resistance of specimens. Reduction of water and glycerol in mixtures increased the barrel pressure of the extruder. Mold release was improved by incorporating 0.25 parts tallow per 100 parts of solid material (soy protein and starch). The water absorption of the specimens was reduced by adding acids to adjust the pH to the isoelectric point of soy proteins (pH 4.5). Effects of storage at different relative humidities were studied. The processibility of pellets was stable after a 4-wk-storage period, despite some moisture loss. Injection-molded specimens, after being stored for up to 6 mon at dry conditions [50 and 11% relative humidity (RH)] at room temperature and for 4 wk in a 50°C oven, showed no surface crack. However, humid (93% RH) storage at room temperature promoted fungal growth after storage for 3 mon, indicating that preservatives such as potassium sorbate and propionic acid were needed.
Similar content being viewed by others
References
Kinsella, J.E., S. Damodaran, and B. German, Physicochemical and Functional Properties of Oilseed Proteins with Emphasis on Soy Proteins, in New Protein Foods, edited by A.M. Altchul and H.L. Wilcke, Academic Press, Inc., New York, 1985, Vol. 5, pp. 107–179.
Burnett, R.S., Soy Protein Industrial Products, in Soybeans and Soybean Products, Vol. II, edited by R.S. Markley, Interscience Publishers, Inc., New York, 1951, pp. 1006–1053.
Schwalbe, H.C., Isolated Soy Proteins from a User’s Viewpoint, in Synthetic and Protein Adhesives for Paper Coating, Technical Association of the Pulp and Paper Industry (TAPPI) Monograph Series 22, 1961, pp. 167–205.
Lambuth, A.L., Protein Adhesives for Wood, in Wood Adhesives—Chemistry and Technology, edited by A.P. Pizzi, Marcel Dekker, Inc., New York, 1989, Vol. 2, pp. 1–29.
Myers, D.J., Present and Potential Uses of Soy Proteins in Nonfood Industrial Applications, in Proceedings of The World Conference on Oilseed Technology and Utilization, edited by T.H. Applewhite, AOCS Press, Champaign, 1992, pp. 278–285.
Myers, D.J., Industrial Applications for Soy Protein and Potential for Increased Utilization, Cereal Foods World 38:35–55 (1993).
Mauro, D.J., An Update on Starch, Ibid.:776–780 (1996).
Paetau, I., C.-Z. Chen, and J. Jane, Biodegradable Plastic Made From Soybean Products. I. Effect of Preparation and Processing on Mechanical Properties and Water Absorption, J. Ind. Eng. Chem. Res. 33:1821–1827 (1994).
Paetau, I., C.-Z. Chen, and J. Jane, Biodegradable Plastic Made From Soybean Products. II. Effects of Cross-Linking and Cellulose Incorporation on Mechanical Properties and Water Absorption, J. Environ. Polym. Degrad. 2:211–217 (1994).
Spence, K.E., J. Jane, and A.L. Pometto III, Dialdehyde Starch and Zein Plastic: Mechanical Properties and Biodegradability, Ibid.:69–74 (1995).
Jane, J., and S. Wang, Soy Protein-Based Thermoplastic Composition for Preparing Molded Articles, U.S. Patent 5,523,293 (1996).
Lim, S., and J. Jane, Storage Stability of Injection-Molded Starch-Zein Plastics Under Dry and Humid Conditions, J. Environ. Polym. Degrad. 2:111–120 (1994).
Spence, K.E., A.L. Allen, S. Wang, and J. Jane, Soil and Marine Biodegradation of Protein-Starch Plastics, in Hydrogels and Biodegradable Polymers for Bioapplications, American Chemical Society, Washington, DC, 1996, pp. 149–158.
Wang, S., H.-J. Sue, and J. Jane, Effects of Polyhydric Alcohols on the Mechanical Properties of Soy Protein Plastics, J. Macro. Sci.—Pure Appl. Chem., AA33:557–569 (1996).
Huang, H.C., E.G. Hammond, C.A. Reitmeier, and D.J. Myers, Properties of Fibers Produced from Soy Protein Isolate by Extrusion and Wet-Spinning, J. Am. Oil Chem. Soc. 72:1453–1460 (1995).
Ledward, D.A., and J.R. Mitchell, Protein Extrusion—More Question Than Answers? in Food Structure—Its Creation and Evaluation, edited by J.M.V. Blanshard and J.R. Mitchell, Butterworths, London, 1988, pp. 219–229.
Wiedmann, W., and W. Pfaller, Innovative Uses of Extrusion Technology in the Food Industry, in Research and Development Associates for Military Food and Packaging Systems 44:244–261.
ASTM D638-86, Standard Test Method for Tensile Properties of Plastics, Book ASTM Stand. 8:210–225 (1991).
ASTM D570-81, Standard Test Method for Tensile Properties of Plastics, Book ASTM Stand. 8:187–190 (1991).
Moore, C.O., J.V. Tuschhoff, C.W. Hasting, and R.V. Schanefelt, Application of Starches in Foods, in Starch: Chemistry and Technology, edited by R.L. Whistler, J.N. BeMiller, and E.F. Paschall, Academic Press, Orlando, 1984, pp. 575–591.
Rutenberg, M.W., and D. Solarek, Starch Derivatives, Ibid., edited by R.L. Whistler, J.N. BeMiller, and E.F. Paschall, Academic Press, Orlando, 1984, pp. 311–388.
Hanssen, M., in E for Additives, Thorsons Publishing Group, Wellingborough, United Kingdom, 1987, p. 107.
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Huang, H.C., Chang, T.C. & Jane, J. Mechanical and physical properties of protein-starch based plastics produced by extrusion and injection molding. J Am Oil Chem Soc 76, 1101–1108 (1999). https://doi.org/10.1007/s11746-999-0210-4
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s11746-999-0210-4