Erratum to: J Am Oil Chem Soc DOI 10.1007/s11746-014-2416-3

First six figures (Figs. 1, 2, 3, 4, 5, 6) were swapped inadvertently in the original publication of the article. The correct figures and their relevant captions are given below.

Fig. 1
figure 1

Time/temperature program for small angle X-ray diffraction (SAXD) experiment. The samples were cooled in a stepwise manner. SAXD patterns were recorded (dotted line) after holding the samples at the target temperatures for 60 min

Full size image
Fig. 2
figure 2

Time-variations in SFC values of DAG-rich oil with and without PGFE additives of a 0.2 % and b 1.0 % measured at 0 °C. τlag is induction time for crystallization. Values are means ± SE (n = 3)

Full size image
Fig. 3
figure 3

Optical micrographs obtained at different crystallization stages of DAG-rich oil with and without PGFE 3 additive (0.2 %). For both oils, micrographs were obtained at four temperatures during cooling processes at a rate of 0.5 °C/min

Full size image
Fig. 4
figure 4

DSC cooling thermopeaks of DAG-rich oil with and without PGFE 3 additive (0.2 %)

Full size image
Fig. 5
figure 5

Induction time for crystallization of model-DAG oil with and without PGFE 3 additive (0.2 %) measured at different temperatures

Full size image
Fig. 6
figure 6

Optical micrographs of model-DAG oil with and without PGFE additive (0.2 %) obtained at different stages of isothermal crystallization (3 °C)

Full size image