Erratum to: J Fail. Anal. and Preven. (2014) 14:343–353 DOI 10.1007/s11668-014-9803-9
The correct address for Materials Science, University of Texas at El Paso is 500 W. University Avenue, El Paso, TX 79968, USA.
As specified in the original article, the data for UTS, elongation to break and Young’s modulus for the ABS loaded with TiO2, jute fiber and TP elastomer were based on three specimens instead of five specimens. Tables 3 and 4 are updated with the correct data. The data for ABS remains the same.
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found under doi:10.1007/s11668-014-9803-9.
Rights and permissions
About this article
Cite this article
Torrado Perez, A.R., Roberson, D.A. & Wicker, R.B. Erratum to: Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials. J Fail. Anal. and Preven. 14, 549 (2014). https://doi.org/10.1007/s11668-014-9844-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11668-014-9844-0