Journal of Thermal Spray Technology

, Volume 25, Issue 7, pp 1373–1373

Retraction Note to: Structure and Mechanical Properties of Thick Copper Coating Made by Cold Spray

  • R. Gr. Maev
  • V. Leshchynsky
  • E. Strumban
  • D. Dzhurinskiy
  • J. Kocimski
  • E. Maeva
Retraction Note

DOI: 10.1007/s11666-016-0454-0

Cite this article as:
Maev, R.G., Leshchynsky, V., Strumban, E. et al. J Therm Spray Tech (2016) 25: 1373. doi:10.1007/s11666-016-0454-0

Retraction Note to: Journal of Thermal Spray Technology DOI: 10.1007/s11666-015-0313-4

This article has been retracted after further review by the JTST Editorial Board as the deposition of a sublayer was ignored; yet this layer was the primary focus of the paper. Also, the essential data concerning deposition of the sublayer were omitted as the sublayer was deposited using helium as the propellant gas, while the thick copper coating was deposited using nitrogen as the propellant gas.

Copyright information

© ASM International 2016

Authors and Affiliations

  • R. Gr. Maev
    • 1
  • V. Leshchynsky
    • 1
  • E. Strumban
    • 1
  • D. Dzhurinskiy
    • 1
  • J. Kocimski
    • 1
  • E. Maeva
    • 1
  1. 1.Institute for Diagnostic Imaging ResearchWindsorCanada