Abstract
Corrosion resistance of friction surfaced AISI 304 coating in boiling nitric acid and chloride containing environments was found to be similar to that of its consumable rod counterpart. This was in contrast to the autogenous fusion zone of GTAW weld which showed inferior corrosion resistance with respect to the consumable rod. The superior corrosion resistance of friction surfaced coatings was attributed to the absence of δ-ferrite in it.
Similar content being viewed by others
References
M. Chandrasekaran, A.W. Batchelor, and S. Jana, Friction Surfacing of Metal Coatings on Steel and Aluminum Substrate, J. Mater. Process. Technol., 1997, 72, p 446–452
G. Madhusudhan Reddy and T. Mohandas, Friction Surfacing of Metallic Coatings on Steels, Proceedings of the International Institute of Welding International Congress 2008, IIW Chennai, India, 8–10 Jan 2008, p 1197–1213
G. Madhusudhan Reddy, K. Srinivasa Rao, and T. Mohandas, Friction Surfacing: Novel Technique for Metal Matrix Composite Coating on Aluminium-Silicon Alloy, Surf. Eng., 2009, 25, p 25–30
A.W. Batchelor, S. Jana, C.P. Koh, and C.S. Tan, The Effect of Metal Type and Multi-layering on Friction Surfacing, J. Mater. Process. Technol., 1996, 57, p 172–181
W.M. Thomas and S.B. Dunkerton, Friction Surfacing, Weld. Inst. Res. Bull., 1984, 25(10), p 327–332
ASM Hand Book, Corrosion of Stainless Steel Weldments, ASM International, 13A, 2003, p 301–316
J.M.A. Van Der Horst, The Influence of Ferrite Content on the Corrosion Resistance of Austenitic Stainless Steel in Urea Synthesis, Metallography, 1970, 3, p 433–440
B.T. Lu, Z.K. Chen, J.L. Luo, B.M. Patchett, and Z.H. Xu, Pitting and Stress Corrosion Cracking Behavior in Welded Austenitic Stainless Steel, Electrochim. Acta, 2005, 50, p 1391–1403
H. Khalid Rafi, G.D. Janaki Ram, G. Phanikumar, and K. Prasad Rao, Friction Surfaced Tool Steel (H13) Coatings on Low Carbon Steel—A Study on the Effects of Process Parameters on Coating Characteristics and Integrity, Surf. Coat. Technol., 2010, 205, p 232–242
S. Kou and Y. Le, Effect of Quenching on the Solidification Structure and Transformation Behavior of Stainless Steel Welds, Metall. Trans., 1982, 13A, p 1141–1152
H. Khalid Rafi, K. Balasubramaniam, G. Phanikumar, and K. Prasad Rao, Thermal Profiling Using Infrared Thermography in Friction Surfacing. Metal. Mater. Trans. A, 2011, 42(11), p 3425–3429
T.M. Devine, Mechanism of Intergranular Corrosion and Pitting Corrosion of Austenitic and Duplex 308 Stainless Steel, J. Electrochem. Soc., 1979, 126(3), p 374–385
E.M.L.E.M. Jackson, P.E. de Visser, and L.A. Cornish, Distinguishing Between Chi and Sigma Phases in Duplex Stainless Steels Using Potentiostatic Etching, Mater. Charact., 1993, 31, p 185–190
J. Hau and A. Seijas, Sigma Phase Embrittlement of Stainless Steel in FCC Service, Corrosion NACExpo 2006, Houston, USA
T. Ishida, Formation of Stainless Steel Layer on Mild Steel by Welding Arc Cladding, J. Mater. Sci., 1991, 26, p 6431–6435
A. Garner, How Stainless Steel Welds Corrode, Met. Prog., 1985, 127(5), p 31
A. Garner, The Effect of Autogenous Welding on Chloride Pitting Corrosion in Austenitic Stainless Steels, Corrosion, 1979, 35(3), p 108–114
H.S. Khatak and Baldev Raj, Ed., Corrosion of Austenitic Stainless Steels: Mechanism, Mitigation and Monitoring. Woodhead Publishing Limited, Abington, Cambridge
M.I. Luppo, A. Hazarabedian, and J. Ovejero-Garcia, Effects of Delta Ferrite on Hydrogen Embrittlement of Austenitic Stainless Steel Welds, Corros. Sci., 1999, 41, p 87–103
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Khalid Rafi, H., Phanikumar, G. & Prasad Rao, K. Corrosion Resistance of Friction Surfaced AISI 304 Stainless Steel Coatings. J. of Materi Eng and Perform 22, 366–370 (2013). https://doi.org/10.1007/s11665-012-0270-8
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-012-0270-8