Skip to main content
Log in

Evaluation of Diffusion Barrier Between Lead-Free Solder Systems and Thermoelectric Materials

  • Published:
Journal of Electronic Materials Aims and scope Submit manuscript

Abstract

The intermetallic compound SnTe rapidly formed at interfaces between p-type bismuth telluride (Bi0.5Sb1.5Te3) thermoelectric materials and lead-free solders. The intermetallic compound influences the mechanical properties of the joints and the reliability of the thermoelectric modules. Various lead-free solder alloys, Sn-3.5Ag, Sn-3Ag-0.5Cu, Sn-0.7Cu, and Sn-2.5Ag-2Ni, were used to investigate the interfacial reactions. The results thus obtained show that Ag and Cu preferentially diffused into the Te-rich phase in Bi0.5Sb1.5Te3, so layers of Ag-Te and Cu-Te compounds could not form an effective diffusion barrier. Electroless nickel-phosphorus was plated at the interfaces to serve as a diffusion barrier, and the (Cu,Ni)6Sn5 compound formed instead of SnTe. Furthermore, the intermetallic compound NiTe formed between nickel- phosphorus and Bi0.5Sb1.5Te3 and also served as a diffusion barrier. A plot of thickness as a function of annealing time yielded the growth kinetics of the intermetallic compounds in the thermoelectric material systems. The activation energy for the growth of the NiTe intermetallic compound is 111 kJ/mol.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. M.G. Kanatzidis, S.D. Mahanti, and T.P. Hogan, Chemistry, physics, and materials science of thermoelectric materials - Beyond bismuth telluride (New York: Kluwer Academic/Plenum, 2003), p. 1.

  2. S.W. Chen and C.N. Chiu, Scripta Mater. 56, 97 (2007).

    Article  CAS  Google Scholar 

  3. C.N. Liao and Y.C. Huang, J. Mater. Res. 25, 391 (2010).

  4. C.N. Liao and C.H. Lee, J. Mater. Res. 23, 3303 (2008).

  5. Y.C. Lan, D.Z. Wang, G. Chen, and Z.F. Ren, Appl. Phys. 92, 101910 (2008).

    Google Scholar 

  6. O.D. Iyore, T.H. Lee, R.P. Gupta, J.B. White, H.N. Alshareef, M.J. Kim, and B.E. Gnade, Surf. Interface Anal. 41, 440 (2009).

    Article  CAS  Google Scholar 

  7. C.N. Chiu, C.H. Wang, and S.W. Chen, J. Electron. Mater. 37, 40 (2008).

    Google Scholar 

  8. I. Karakaya and W.T. Thompson, J. Phase Equilibria, 12, 56 (1991).

    Google Scholar 

  9. A.S. Pashinkin and V.A. Fedorov, Inorganic Materials 39, 539 (2003).

    Article  CAS  Google Scholar 

  10. I. Barin and G. Platzki, Thermochemical Data of Pure Substances (New York: Wiley-VCH, 1995), p. 1556.

    Book  Google Scholar 

  11. P. Nash and H. Choo, J. Mater. Sci. 33, 4929 (1998).

  12. C.E. Ho, Y.W. Lin, S.C. Yang, and C.R. Kao, Proceedings of 10th International Symposium on Advanced Packaging Materials (Piscataway, NJ: IEEE, 2005), p. 39.

  13. R.P. Gupta, O.D. Iyore, K. Xiong, J.B. White, K. Cho, H.N. Alshareef, and B.E. Gnade, Electrochem. Solid-State Lett. 12, H395 (2009).

    Article  CAS  Google Scholar 

  14. A.D. Mah and L.B. Pankratz, Contributions to the Data on Theoretical Metallurgy: XVI, Thermodynamic Properties of Nickel and its Inorganic Compounds, Vol. 668, ed. B. o. M. (Washington: United States Department of the Interior, 1976).

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Albert T. Wu.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Lin, T., Liao, C. & Wu, A.T. Evaluation of Diffusion Barrier Between Lead-Free Solder Systems and Thermoelectric Materials. J. Electron. Mater. 41, 153–158 (2012). https://doi.org/10.1007/s11664-011-1740-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11664-011-1740-8

Keywords

Navigation