Skip to main content
Log in

A Stoneley wave method to detect interlaminar damage of metal layer composite pipe

  • Research Article
  • Published:
Frontiers of Mechanical Engineering Aims and scope Submit manuscript

Abstract

The interlaminar defect is a major form of damage in metal layer composite pipes which are widely used in petroleum and chemical industry. In this paper, a Stoneley wave method is presented to detect interlaminar damage in laminated pipe structure. Stoneley wave possesses some good characteristics, such as high energy and large displacement at the interface and non-dispersive in the high-frequency, so the sensitivity of detecting interlaminar damage can be improved and the higher frequency can be used in damage detection compared with Lamb waves. Additionally, as the frequency increases, the wavelength of the Stoneley wave reduces. Thus, its ability to detect small defects at the interface is enhanced. Finite element model of metal layer composite pipe with interlaminar damage is used to simulate wave propagation of Lamb waves and Stoneley wave, respectively. The damage location is calculated by using the Stoneley wave signal obtained from finite element model, and then the results are compared with the actual damage locations. The simulation examples demonstrate that the Stoneley wave method can better identify the interlaminar damage in laminated pipe structure compared with Lamb waves.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Baba N. US Patent, 3740826, 1971-06-17

  2. Raghavan A, Cesnik C E S. Review of guided-wave structural health monitoring. The Shock and Vibration Digest, 2007, 39(2): 91–114

    Article  Google Scholar 

  3. Rose J L. Ultrasonic guided waves in structural health monitoring. Key Engineering Materials, 2004, 270–273: 14–21

    Article  Google Scholar 

  4. Rose J L. A baseline and vision of ultrasonic guided wave inspection potential. Journal of Pressure Vessel Technology, 2002, 124(3): 273–282

    Article  Google Scholar 

  5. Ng C T, Veidt M. A Lamb-wave-based technique for damage detection in composite laminates. Smart Materials and Structures, 2009, 18(7): 074006

    Article  Google Scholar 

  6. Duflo H, Morvan B, Izbicki J L. Interaction of Lamb waves on bonded composite plates with defects. Composite Structures, 2007, 79(2): 229–233

    Article  Google Scholar 

  7. Su Z, Ye L, Lu Y. Guided Lamb waves for identification of damage in composite structures: A review. Journal of Sound and Vibration, 2006, 295(3–5): 753–780

    Article  Google Scholar 

  8. Su Z, Ye L. Selective generation of Lamb wave modes and their propagation characteristics in defective composite laminates. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 2004, 218(2): 95–110

    Article  Google Scholar 

  9. Wang L, Yuan F G. Group velocity and characteristic wave curves of Lamb waves in composites: Modeling and experiments. Composites Science and Technology, 2007, 67(7–8): 1370–1384

    Article  Google Scholar 

  10. Stoneley R. Elastic waves at the surface of separation of two solids. Proceedings of the Royal Society of London, 1924, 106(738): 416–428

    Article  Google Scholar 

  11. Rose J L. Ultrasonic Waves in Solid Media (in Chinese, trans. He C F, Wu B, Wang X Y). Beijing: Science Press, 2004, 108–110

    Google Scholar 

  12. Cui H, Trevelyan J, Johnstone S. Stoneley waves in three-layered cylindrical solid media. Journal of the Acoustical Society of America, 2011, 130(1): EL44–EL49

    Article  Google Scholar 

  13. Bostron J H, Rose J L, Moose C A. Ultrasonic guided interface waves at a soft-stiff boundary. Journal of the Acoustical Society of America, 2013, 134(6): 4351–4359

    Article  Google Scholar 

  14. Zhuang Z, You X C, Liao J H. Finite Element Analysis and Application of ABAQUS. Beijing: Tsinghua University Press, 2009 (in Chinese)

    Google Scholar 

  15. Gardner M D, Rose J L, Koudela K L, et al. Inspect ability of interfaces between composite and metallic layers using ultrasonic interface waves. Proceedings of Meetings on Acoustics, 2013, 19: 030105

    Article  Google Scholar 

  16. Thurston R N. Elastic waves in rods and clad rods. Journal of the Acoustical Society of America, 1978, 64(1): 1–37

    Article  MATH  Google Scholar 

  17. Nkemzi D. A new formula for the velocity of Rayleigh waves.Wave Motion, 1997, 26(2): 199–205

    Article  MATH  MathSciNet  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Bing Li.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Li, B., Qiang, L., Lu, T. et al. A Stoneley wave method to detect interlaminar damage of metal layer composite pipe. Front. Mech. Eng. 10, 89–94 (2015). https://doi.org/10.1007/s11465-015-0323-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11465-015-0323-4

Keywords

Navigation