The brittle fracture resistance of a pipe with the circumferential edge crack on thermal shock is determined by a maximum J-integral value at the stage of plastic strain development near the crack tip. In an elastoplastic metal, the value of J-integral on thermal shock reaches its maximum with an increase in strain energy near the crack tip.
Similar content being viewed by others
References
PNAÉ G-7-002-86. Norms of Strength Calculations for the Equipment and Pipelines of Nuclear Power Plants [in Russian], Énergoatomizdat, Moscow (1989).
RD ÉO-606-2005. Procedure of Brittle Fracture Resistance Calculations for NPP Pressure Vessels with WWER [in Russian], St. Petersburg, Moscow (2004).
MT-D 0.03.391-06. Procedure of Strength and Life Assessment of WWER Pressure Vessels in Operation [in Russian], Kiev (2009).
J. R. Rice, “A path independent integral and the approximate analysis of strain concentration by notches and cracks,” J. Appl. Mathem., 35, 379–386 (1968).
V. I. Astaf’ev, Yu. N. Radaev, and L. V. Stepanova, Nonlinear Fracture Mechanics [in Russian], Samara University, Samara (2004).
V. V. Pokrovskii and A. G. Ivanchenko, “Prediction of the warm prestressing effect on an increase in the brittle strength of crack-containing heat-resistant structural steels. Part 1. Model and procedure of calculating the warm prestressing effect,” Strength Mater., 34, No. 6, 598–605 (2002).
V. V. Kharchenko, A. Yu. Chirkov, S. V. Kobel’skii, et al., “The influence of thermomechanical loading history on the stress level in WWER NPP reactor pressure vessels under thermal shock,” Strength Mater., 42, No. 1, 17–24 (2010).
O. Yu. Chirkov, Development and Realization of the Mixed Finite Element Method in the Problems of Strength, Vibrations, and Integrity of Structural Elements [in Ukrainian], Abstract of Thesis for a Doctor’s Degree Dr. Tech Sci, Kiev (2008).
Documentation for ANSYS. Release 10.0.
A. Ya. Krasovskii and V. N. Krasiko, Fracture Toughness of Steels for Main Pipelines [in Russian], Naukova Dumka, Kiev (1990).
Author information
Authors and Affiliations
Additional information
Translated from Problemy Prochnosti, No. 5, pp. 76 – 84, September – October, 2012.
Rights and permissions
About this article
Cite this article
Stepanov, G.V. Assessment of J-integral near the tip of a circumferential edge crack in a thick-walled pipe on rapid cooling of its inner surface. Strength Mater 44, 518–524 (2012). https://doi.org/10.1007/s11223-012-9411-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11223-012-9411-4