The structure and texture of powder alloy KS-37 is studied. It is shown that the recrystallization occurring under heat treatment changes substantially the crystallographic and magnetic textures of the compacted material.
Similar content being viewed by others
References
K. Strnat, G. Hoffer, J. Olson, et al., “A family of new cobaltbased permanent magnet materials,” J. Appl. Phys., 38, 1001 – 1002 (1967).
K. H. J. Buschow and A. S. Goot, “Intermetallic compounds in the system samarium-cobalt,” J. Less-Comm. Met., 14, 323 – 328 (1968).
E. M. Kirkpatrick and D. L. Leslie-Pelecky, “Structural and magnetic properties of mechanically milled SmCo5: C,” J. Appl. Phys., 87(9), 6734 – 6736 (2000).
M. F. De Campos, H. Okumura, and G. C. Hadjipanayis, “Effect of several heat treatments on the microstructure and coercivity of SmCo5 magnets,” J. Alloys Comp., 368, 304 – 307 (2004).
V. P. Menushenkov, “The crystal structure and coercive force of SmCo5 permanent magnets,” J. Magn. Magn. Mater., 290 – 291, 1274 – 1277 (2005).
H. Gu, B. Xu, and J. Rao, “Chemical synthesis of narrowly dispersed SmCo5 nanoparticles,” J. Appl. Phys., 93, 7589 – 7591 (2003).
Y. Wang, Y. Li, C. Rong, and J. P. Liu, “Sm – Co hard magnetic nanoparticles prepared by surfactant-assisted ball milling,” Nanotechnology, 18, art. no 465701 (4 pp) (2007).
B. Z. Cui, W. F. Li, and G. C. Hadjipanayis, “Formation of SmCo5 single-crystal submicron flakes and textured polycrystalline nanoflakes,” Acta Mater., 59(2), 563 – 571 (2011).
W. F. Li, H. Sepehri-Amin, L. Y. Zheng, et al., “Effect of ball-milling surfactants on the interface chemistry in hot-compacted SmCo5 magnets,” Acta Mater., 60(19), 6685 – 6691 (2012).
A. A. Redikul’tsev, M. L. Lobanov, G. M. Rusakov, and L. V. Lobanova, “Secondary recrystallization in alloy Fe – 3% Si with one-component texture (100)[001],” Fiz. Met. Metalloved., 114(1), 39 – 46 (2013).
M. F. De Campos, T. Yonamine, M. Fukuhara, et al., “Electron backscattered diffraction texture analysis of SmCo5 magnets,” J. Appl. Phys., 101, art. no 09K516 (4 pp) (2007).
R. Shimizu, J. Harase, and D. J. Dingley, “Prediction of secondary recrystallization in Fe – 3% Si by three-dimensional texture analysis,” Acta Mater., 38, 973 – 978 (1990).
T. Kumano, T. Haratani, and T. Ushigami, “The relationship between primary and secondary recrystallization texture of grain oriented silicon steel,” ISIJ Int., 42, 440 – 449 (2002).
M. L. Lobanov, G. M. Rusakov, and A. A. Redikul’tsev, “Electrical anisotropic steel. Part I. History of development,” Metalloved. Term. Obrab. Met., No. 7, 18 – 25 (2011).
G. M. Rusakov, “Low energy of special torsion boundaries,” Fiz. Met. Metalloved., 90(2), 14 – 20 (2000).
The work has been performed with the help of the equipment of the laboratory for structural methods of analysis and properties of materials and nanomaterials of TsKP UrFU within design topic MOiN RF (State Specification No. 11.1465.2014/K) and with assistance of the program for support of the leading universities of the RF aimed at raising their competitiveness No. 211 of the Government of the RF No. 02.A03.21.0006.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 8, pp. 50 – 54, August, 2015.
Rights and permissions
About this article
Cite this article
Rusakov, G.M., Lobanov, M.L., Redikul’tsev, A.A. et al. Effect of Recrystallization on the Texture and Properties of Powder Hard Magnetic Materials Based on SmCo5 . Met Sci Heat Treat 57, 498–502 (2015). https://doi.org/10.1007/s11041-015-9911-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-015-9911-5