Abstract
ZrO2/(Al2O3–Y2O3) composite coating was deposited on Ti-6.5Al-3.5Mo-15Zr-0.3Si (at.%) alloy via sol–gel spin coating with the hope to improve its high-temperature oxidation resistance. The as-prepared coating was dense, uniform and crack-free. Isothermal and cyclic oxidation tests of coated and uncoated specimens at 700 °C for 100 h were performed to evaluate its effect on oxidation behavior of the alloy. The results indicated that oxidation resistance and spallation resistance for coated specimen have been remarkably improved, thickness of oxide scale of coated specimen was thinner than that of uncoated one and the scale was composed of deposited Al2O3 outermost layer, a thin TiO2 middle layer and a mixture of Al2O3 and ZrO2 thick innermost layer. The mechanism of the coating having beneficial effects could be attributed to the inhibition of the inward diffusion of O and outward diffusion of Ti and Al, lower thermal stress and good adhesion between the coating and substrate.
Graphical Abstract
Similar content being viewed by others
References
Clemens H, Kestler H (2000) Adv Eng Mater 2:551–570
Cao R, Zhu H, Chen JH et al (2008) J Mater Sci 43:299–311
Kothari K, Radhakrishnan R, Wereley NM (2012) Prog Aerosp Sci 55:1–16
Chen L, Paulitsch J, Du Y et al (2012) Surf Coat Technol 206:2954–2960
Varma SK, Chan A, Mahapatra BN (2001) Oxid Met 55:423–435
Teng LD, Nakatomi D, Seetharaman S (2007) Metall Mater Trans B 38:477
Yamaguchi M, Inui H, Ito K (2000) Acta Mater 48:307
Shida Y, Anada H (1996) Oxid Met 45:197–219
Becker S, Rahmel A, Schorr M et al (1992) Oxid Met 38:425–464
Wallace TA, Clark RK, Wiedemann KE et al (1992) Oxid Met 37:111–124
Tang ZL, Wang FH, Wu WT (2000) Mater Sci Eng, A 276:70–75
Li ZW, Gao W, He YD (2001) Scr Mater 45:1099
Jung HG, Jung DJ, Kim KY (2002) Surf Coat Technol 154:75
Hovsepian PE, Ehiasarian AP, Braun R et al (2010) Surf Coat Technol 204:2702
Oechsner M, Hillman C, Lange F (1996) J Am Ceram Soc 79:1834–1838
Chu MS, Wu SK (2004) Surf Coat Technol 179:257–264
Li H, Liang K, Mei L et al (2001) Mater Lett 51:320–324
Zhang XJ, Zhao SY, Gao CX et al (2009) J Sol Gel Sci Technol 49:221–227
Zhang XJ, Ren BY, Gao CX et al (2011) J Sol Gel Sci Technol 59:561–568
Zhang XJ, Li Q, Zhao SY et al (2008) Appl Surf Sci 255:1860–1864
Zhang XJ, Li Q, Zhao SY et al (2008) J Sol Gel Sci Technol 47:107–114
Huang JF, Zeng XR, Li HJ et al (2005) Surf Coat Technol 190:255
Li X, Liu H, Wang JY et al (2004) J Am Ceram Soc 87:2288
Wagner C (1952) J Electrochem Soc 99:369
Pint BA (1996) Oxid Met 45:1–4
Evans HE (1989) Mater Sci Eng, A 120:139–146
Acknowledgments
This work was financially supported by the Chinese National Natural Science Foundation (Grant No. 51371097) and A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yao, Y.B., Yao, Z.J. & Zhou, Y.J. High-temperature oxidation resistance of sol–gel-derived ZrO2/(Al2O3–Y2O3) coating on titanium alloy. J Sol-Gel Sci Technol 80, 612–618 (2016). https://doi.org/10.1007/s10971-016-4172-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10971-016-4172-3