Abstract
The influence of sintering temperature on densification, microstructure and the mechanical properties of bovine hydroxyapatite (BHA), produced by a calcination method, was investigated. Densification and mechanical properties improved with increasing sintering temperature in the range between 1000°C and 1300°C, with optimum properties being obtained at a sintering temperature of 1200°C. The measured mechanical properties indicate that sintered BHA bodies are interesting biomaterials for further investigation in biomedical applications.
Similar content being viewed by others
References
G. Goller and F.N. Oktar, Mater. Lett. 56, 142 (2002).
F.N. Oktar, G. Goller, M. Yetmez, and D. Toykan, Key Eng. Mater. 240–242, 315 (2004).
S.K. Ritter, Boning Up. At the human body shop, bioceramics or biopolymers combined with bone cells and growth factor are likely to lead the parts list (Chemical Engineering News, August 25, 1997, http://pubs.acs.org/hotartel/cenear/97cen.html).
F.N. Oktar, K. Kesenci, and E. Piskin, Artificial Cell, Blood Substitutes Immobilization Biotechnology 27, 367 (1999).
B. Ben-Nissan, Currr. Opin. Sol. State Mater. Sci. 7, 283 (2003).
M. Raspanti, S. Guizzardi, V. De Pasquale, D. Martini and A. Ruggeri, Biomaterials 15, 433 (1994).
S. Guizzardi, M. Raspanti, D. Martini, R. Scandroglio, P. Govoni, and A. Ruggeri, Biomaterials 16, 931 (1995).
L.S. Ozyegin, F.N. Oktar, G. Goller, E.S. Kayali, and T. Yazici, Mater. Lett. 58, 2605 (2004).
G. Goller, F.N. Oktar, L.S. Ozyegin, E.S. Kayali, and E. Demirkesen, Mater. Lett. 58, 2599 (2004).
F.N. Oktar and G. Goller, Ceramic International 28, 617 (2002).
G. Goller, H. Demirkiran, F.N. Oktar, and E. Demirkesen, Ceram. Int. 29, 721 (2003).
G. Goller, F.N. Oktar, D. Toykan, and E.S. Kayali, Key Eng. Mater. 240–242, 619 (2003).
P. Valerio, F.N. Oktar, L. Ozyegin, G. Goller, A.M. Goes, and M.F. Leite, Key Eng. Mater. 254–256, 837 (2004).
P. Valerio, F.N. Oktar, G. Goller, A.M. Goes, and M.F. Leite, Key Eng. Mater. 254–256, 777 (2004).
F.N. Oktar, S. Ozsoy, and L.S. Ozyegin, Key Eng. Mater. 240–242, 327 (2003).
S. Altintas, H. Gokbayrak, and S. Goren, Key Eng. Mater. 264–268, 1949 (2004).
H. Gokbayrak, Production of hydroxyapatite ceramics, M.S. Thesis, Bogazici University, 1996.
F.N. Oktar, Y. Genc, G. Goller, H. Demirkiran, D. Toykan, and H. Haybat, Key Eng. Mater. 264–268, 2087 (2004).
E.A. Monroe, Biomaterials—Teeth, Course notes (State University of New York, College of Ceramics at Alfred University, Alfred, NY, June USA, 1987).
C.P.A.T. Klein, P. Patka, J.G.C. Wolke, J.M.A. Blieck-Hugervorst, and K. de Groot, Biomaterials 15, 146 (1994).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Goller, G., Oktar, F.N., Agathopoulos, S. et al. Effect of sintering temperature on mechanical and microstructural properties of bovine hydroxyapatite (BHA). J Sol-Gel Sci Technol 37, 111–115 (2006). https://doi.org/10.1007/s10971-006-6428-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10971-006-6428-9