Erratum to: J Med Syst (2014) 38:152
DOI 10.1007/s10916-014-0152-8
The original version of this article unfortunately contained errors. The details are provided below:
1st correction: (see article title)
Instead of:
Electrophisiological
Say:
Electrophysiological
2nd correction: (see page 2 of the article)
Instead of:
Say:
3rd correction: (see page 4 of the article)
Instead of:
Say:
4th correction: (see page 4 of the article)
Instead of:
Say:
5th correction: (see page 4 of the article)
Instead of:
3- The gain bandwidth product (A1 .∆f) of the amplifier must be less than the cutoff frequency (fT) of the used operational amplifier.
Say:
3-The gain bandwidth noise product (A1 .∆f) must be higher than the cutoff frequency (fT) of the used operational amplifier.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ngounou, G.M., Kom, M. Erratum to: Optimization of Noise in Non-integrated Instrumentation Amplifier for the Amplification of Very Low Electrophysiological Signals. Case of Electro Cardio Graphic Signals (ECG). J Med Syst 39, 3 (2015). https://doi.org/10.1007/s10916-015-0190-x
Published:
DOI: https://doi.org/10.1007/s10916-015-0190-x