Skip to main content
Log in

Microstructure, thermal behavior, and wettability of Zn4Al3Mg–xIn solders

  • Published:
Journal of Materials Science: Materials in Electronics Aims and scope Submit manuscript

Abstract

The potential of Zn4Al3Mg–xIn alloys to replace Pb-containing solders by high-temperature soldering was studied. The microstructure, thermal behavior, and wettability of Zn4Al3Mg–xIn solders were investigated by scanning electron microscopy, X-ray diffraction, differential scanning calorimetry (DSC), and spreading tests. The influence of In content on the microstructure and characteristics of the solders was explored. Small additions of In result in grain boundary segregation because of the limited solid solubility of In in other phases, and thereby lead to more complicated microstructure of Zn4Al3Mg–xIn alloys. DSC measurements showed that the onset of melting of the Zn4Al3Mg–xIn alloys decreased with increasing In content, while the melting peak became broader. The electrical conductivity values of ZnAlMg–xIn solders were of the same order of magnitude as those of a conventional Pb-5(wt%)Sn solders. The wettability of Zn4Al3Mg–xIn solders over Cu substrate was also improved with increasing In content.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. G. Zeng, S. McDonald, K. Nogita, J. Microelectron. Reliab. 52, 1306–1322 (2012)

    Article  Google Scholar 

  2. A. Kroupa, D. Andersson, N. Hoo, J. Pearce, A. Watson, A. Dinsdale, S. Mucklejohn, JMEPEG 21, 629–637 (2012)

    Article  Google Scholar 

  3. K. Suganuma, S.J. Kim, K.S. Kim, Phase Transform. 61, 64–71 (2009)

    Google Scholar 

  4. R. Mahmudi, M. Eslami, J. Mater. Sci. Mater. Electron. 22, 1168–1172 (2011)

    Article  Google Scholar 

  5. S.J. Kim, K.S. Kim, S.J. Kim, C.Y. Kang, K. Suganuma, Mater. Trans. 49, 1531–1536 (2008)

    Article  Google Scholar 

  6. S.W. Park, S. Nagao, T. Sugahara, K.S. Kim, K. Suganuma, J. Mater. Sci. Mater. Electron. 24, 4704–4712 (2013)

    Article  Google Scholar 

  7. L. Li, Y.C. Liu, H. Gao, Z. Gao, J. Mater. Sci. Mater. Electron. 24, 336–344 (2013)

    Article  Google Scholar 

  8. T. Shimizu, H. Ishikawa, I. Ohnuma, K. Ishida, J. Electron. Mater. 28, 1172–1175 (1999)

    Article  Google Scholar 

  9. H. Baker, H. Okamoto, Alloy Phase Diagrams, 3rd edn. (ASM International, USA, 1992), p. 501

    Google Scholar 

  10. T.B. Massalski, J.L. Murray, L.H. Bennett, Binary Alloy Phase Diagrams (ASM International, Materials Park, 1990), p. 189

    Google Scholar 

  11. T. Takahashi, S. Komatsu, H. Nishikawa, T. Takemoto, J. Electron. Mater. 39, 1241–1247 (2010)

    Article  Google Scholar 

  12. X. Chen, F. Xue, J. Zhou, S. Liu, G. Qian, J. Electron. Mater. 42, 2708–2715 (2013)

    Article  Google Scholar 

  13. T. Gancarz, J. Pstruś, P. Fima, S. Mosińska, JMEPEG 12, 599–604 (2012)

    Article  Google Scholar 

  14. J. Pstruś, P. Fima, T. Gancarz, JMEPEG 21, 606–613 (2012)

    Article  Google Scholar 

  15. Z. Moser, P. Fima, K. Bukat, J. Sitek, J. Pstrus, W. Gasior, M. Koscielski, T. Gancarz, Solder. Surf. Mt. Technol. 23, 22–29 (2011)

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Xin Yan.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Yan, X., Yang, X., Hu, W. et al. Microstructure, thermal behavior, and wettability of Zn4Al3Mg–xIn solders. J Mater Sci: Mater Electron 26, 7537–7543 (2015). https://doi.org/10.1007/s10854-015-3390-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10854-015-3390-8

Keywords

Navigation