Abstract
This study optimizes flexural properties of composites made from waste materials, corn stalk, seed flax and Agave americana fibres along with waste linear low-density polyethylene (LLDPE) and high-density polyethylene (HDPE) matrices. The surface morphology of fibres and composites was characterized with light and scanning electron microscopes. Thermal behaviour of the corn stalk outer rings and pith parenchyma was shown using thermogravimetric analysis. There was no significant difference between the LLDPE composites made with corn stalk outer rings versus whole stalks, possibly due to an insignificant role played by parenchymatous part of the pith. Water retted seed flax fibres in LLDPE matrix optimized the composite flexural strengths at 6–8 days of retting, above which the properties declined. Field retted seed flax varieties in LLDPE matrix showed no significant differences in their flexural strengths. With additional fibre loading, flexural strength of A. americana HDPE composites first dropped before improving after extrusion, and only improved when using the layer method.
Similar content being viewed by others
References
Thamae T, Baillie C (2008) In: Oksman K, Sain M (eds) Wood-polymer composites. Woodhead Publishing, Cambridge
Ganjyal GM, Reddy N, Yang YQ, Hanna MA (2004) J Appl Polym Sci 93:2627
Panthapulakkal S, Sain M (2007) Compos Part A 38:1445
Peterson CJ, Hixon RM (1929) Ind Eng Chem Anal 1:64
Morrison WH, Archibald DD, Sharma HSS, Akin DE (2000) Ind Crop Prod 12:39
Van de Weyenberg I, Ivens J, De Coster A, Kino B, Baetens E, Verpoest I (2003) Compos Sci Technol 63:1241
Sain M, Panthapulakkal S (2003) In: Baillie C (ed) Green composites: polymer composites and the environment. Woodhead Publishing, Cambridge
Thamae TM, Baillie CA (2007) Compos Interfaces 14:821
Boguslavsky A, Barkhuysen F, Timme E, Matsane RN (2007) Establishing of Agave americana industry in South Africa, 5th International Conference on New Crops, Southampton
Chaabouni Y, Drean JY, Msahli S, Sakli F (2006) Text Res J 76:367
Bessadok A, Marais S, Roudesli S, Lixon C, Métayer M (2007) Compos Part A 39:29
Baillie CA (2006) Engineers within a local and global society. Moragan and Claypool publishers, San Rafael
Baillie CA (2003) In: Baillie CA (ed) Green composites: polymer composites and the environment. Woodhead Publishing Limited, Cambridge
Reddy N, Yang Y (2005) Trends Biotechnol 23:22
Han JS (1998) Properties of nonwood fibres. In: Proceedings of the Korean Society of Wood Science and Technology Annual Meeting, Seoul
Mafaesa M (2006) MSc Thesis, Department of Microbial, Biochemical and Food Biotechnology: University of Free State, Bloemfontein
Zah R, Hischier R, Leão AL, Braun I (2007) J Clean Prod 15:1032
White NM, Ansell MP (1983) J Mater Sci 18:1549
Hoover R, Smith C, Zhou Y, Ratnayake RMWS (2003) Carbohydr Polym 52:253
McGee B (2006) Fodder corn/grain corn: area and production, Ontario by county. https://doi.org/www.omafra.gov.on.ca. Accessed 21 Dec 2007
Kissinger M, Fix J, Rees WE (2007) Ecol Econ 62:552
Hooper FE (1931) Plant Physiol 6:531
Arib RMN, Sapuan SM, Ahmad MMHM, Paridah MT, Zaman HMDK (2006) Mater Des 27:391
Kazayawoko M, Balatinecz JJ, Matuana LM (1999) J Mater Sci 34:6189
Dijon G (2002) PhD Thesis, Department of Materials and Department of Biology, University of London
Yury VK (2005) Kirk-Othmer encyclopedia of chemical technology. John Wiley & Sons
Benham E, McDaniel M (2005) Polyethylene, high density, Kirk-Othmer encyclopedia of chemical technology, John Wiley & Sons
Czarnecki L, White JL (1980) J Appl Polym Sci 25:1217
Acknowledgements
The authors would like to acknowledge the financial assistance of the following institutions: Ontario Ministry of Agriculture and Rural Affairs (OMAFRA), Natural Science and Engineering Research Council of Canada (NSERC) and Way Memorial Award at Queens University.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Thamae, T., Marien, R., Chong, L. et al. Developing and characterizing new materials based on waste plastic and agro-fibre. J Mater Sci 43, 4057–4068 (2008). https://doi.org/10.1007/s10853-008-2495-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-008-2495-3