Skip to main content
Log in

Analysis of the Potential Accuracy of Thermodynamic Measurement Using the Double-Wavelength Technique

  • Published:
International Journal of Thermophysics Aims and scope Submit manuscript

Abstract

A detailed analysis of the double-wavelength radiation thermometry technique for determining the thermodynamic temperature is presented. This technique provides an alternative method to absolute filter radiometry without the requirement of traceability to the watt. The analysis derives an algebraic expression for the uncertainties in the temperatures measured with the double-wavelength technique, which shows that the optimum strategy is to employ one narrowband and one broadband spectral responsivity, and that the center wavelengths do not need to be widely separated. With current best estimates for signal and spectral responsivity measurements, it is shown that the double-wavelength method can achieve total uncertainties only about four times larger than the current best absolute radiometric methods. Improvements in the signal measurement in the future could possibly reduce the total uncertainty to a level comparable to absolute radiometry.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  1. A.V. Prokhorov, S.N. Mekhontsev, V.I. Saprisky, in Proceedings of TEMPMEKO ’99, 7th International Symposium on Temperature and Thermal Measurements in Industry and Science, ed. by J.F. Dubbeldam, M.J. de Groot (Edauw Johannissen BV, Delft, 1999), pp. 698–703

  2. E.R. Woolliams, R. Winkler, S.G.R. Salim, Int. J. Thermophys. 30, 144 (2009)

    Article  ADS  Google Scholar 

  3. A.G. Steele, N.L. Rowell, in Proceedings of TEMPMEKO 2001, 8th International Symposium on Temperature and Thermal Measurements in Industry and Science, ed. by B. Fellmuth, J. Seidel, G. Scholz (VDE Verlag, Berlin, 2002), pp. 383–388

  4. G. Machin, P. Bloembergen, K. Anhalt, J. Hartmann, M. Sadli, P. Saunders, E. Woolliams, Y. Yamada, H. Yoon, Int. J. Thermophys. 31, 1779 (2010)

    Article  ADS  Google Scholar 

  5. F. Sakuma, M. Kobayashi, in Proceedings of TEMPMEKO ’96, 6th International Symposium on Temperature and Thermal Measurements in Industry and Science, ed. by P. Marcarino (Levrotto and Bella, Torino, 1997), pp. 305–310

  6. P. Saunders, D.R. White, Metrologia 40, 195 (2003)

    Article  ADS  Google Scholar 

  7. W.H. Press, B.R. Flannery, S.A. Teukolsky, W.T. Vettering, Numerical Recipes (Cambridge University Press, Cambridge, 1986)

    Google Scholar 

  8. F. Righini, A. Rosso, G. Ruffino, in Temperature: Its Measurement and Control in Science and Industry, vol. 4, part 1, ed. by H.H. Plumb (Instrument Society of America, Pittsburgh, 1972), pp. 413–421

  9. G. Machin, P. Bloembergen, K. Anhalt, J. Hartmann, M. Sadli, P. Saunders, E. Woolliams, Y. Yamada, H. Yoon, Realization and Dissemination of Thermodynamic Temperature Above 1234.93 K, CCT/10-12rev1 (2010), http://www.bipm.org/cc/CCT/Allowed/25/D12r_MeP-HT_v8.pdf. Accessed 10 March 2014

  10. P. Saunders, Int. J. Thermophys. 32, 26 (2011)

    Article  ADS  Google Scholar 

  11. P. Saunders, D.R. White, Int. J. Thermophys. 28, 2098 (2007)

    Article  ADS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to P. Saunders.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Saunders, P. Analysis of the Potential Accuracy of Thermodynamic Measurement Using the Double-Wavelength Technique. Int J Thermophys 35, 417–437 (2014). https://doi.org/10.1007/s10765-014-1578-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10765-014-1578-4

Keywords

Navigation