Design and technology solutions to improve the operational safety of hydraulic fill ash-and-slag dumps by reducing or preventing the accumulation of excess water in settling ponds are proposed.
Similar content being viewed by others
References
I. S. Kozhukhovskii and Yu. K. Tselikovskii, “Coal-fired TPPs without ash-and-slag dump: Reality and prospects,” Énergetik, No. 6, 20 – 23 (2011).
A. N. Frolov, “Specific features of water balance calculations for ash-and-slag dumps and reusing hydro-ash removal system of thermal power plants,” Izv. VNIIG im. V. E. Vedeneeva, 254, 113 – 123 (2009).
Rules and Regulations SP 58.13330.2012. Hydraulic-Engineering Structures: Main Principles [in Russian] (approved by order No. 623 of the Ministry of Regional Development of the Russian Federation, December 29, 2011).
A. N. Frolov, “Refinement of procedures for analysis and construction of hydraulicked ash-slag dumps to improve their in-service safety,” Power Techn. Eng., 46(6), 447 – 452 (2013).
V. G. Panteleev and A. N. Frolov, “Classification of the thermal regime of hydraulicked structures in winter,” Gidrotekh. Stroit., No. 1, 31 – 34 (1990).
PB 03-438-02. Safety Rules for Waterworks of Industrial Liquid Waste Reservoirs [in Russian] (approved by decision No. 6 of the Federal Committee for Mining and Industrial Supervision, January 28, 2002), Izd. NTTs “Promyshlennaya Bezopasnost’,” Moscow (2003).
E. N. Bellendir, D. A. Ivashintsov, D. V. Stefanishin, O. M. Finagenov, and S. G. Shul’man (eds.), Probabilistic Methods for Reliability Assessment of Earthen Hydraulic-Engineering Structures. Vol. 2 [in Russian], Izd. VNIIG im. B. E. Vedeneeva, St. Petersburg (2004).
V. G. Panteleev, “Cost-effective designs of ash-and-slag dumps of TPPs,” Énerg. Stroit., No. 11, 11 – 18 (1980).
N. G. Gusar and E. G. Gubitskii, “Some practical proposals on closed-cycle hydraulic ash-transport systems,” Élektr. Stantsii, No. 2, 19 – 22 (1991).
A. I. Tsarev, I. N. Ivashchenko, V. V. Malakhanov, and I. F. Blinov, “Safety criteria for hydraulic-engineering structures as a basis for control of their condition,” Gidrotekh. Stroit., No. 1, 9 – 14 (1994).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Élektricheskie Stantsii, No. 6, June 2014, pp. 19 – 24.
Rights and permissions
About this article
Cite this article
Frolov, A.N. Minimizing the Volume of Water in the Settling Ponds of Hydraulic Fill Ash-and-Slag Dumps to Improve Their Operational Safety. Power Technol Eng 48, 304–308 (2014). https://doi.org/10.1007/s10749-014-0525-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10749-014-0525-7