Abstract
Experimental study of mechanical characteristics of Cobalt-Rich Crusts was conducted by MTS815 rock mechanical testing system and MTS615 environmental chamber under temperatures of 0–150 DEG C. The relationships between temperature and peak force, peak strain, elastic modulus and other parameters are analyzed systematically. Results show that there are different mechanical properties for Cobalt-Rich Crusts under different temperatures. With the increasing of temperature, the peak force and peak strain also are gradually reduced, and the changing amplitude is not a strict linear relationship, with the changing of temperature, the amplitude of the changing is or more or less nonlinear. When the temperature is 0 or 25 DEG C, the elastic modulus of Cobalt-Rich Crusts is nearly equal, but when the temperature changes from 25 to 150 DEG C, the elastic modulus increases with the increasing of temperature. Therefore, the researching work can provide a new idea for deep-sea mining engineering, and also be a theoretical basis for deep-sea mining.
Similar content being viewed by others
References
Gajo A, Cecinato F (2016) Thermo-mechanical modeling of rock-like materials at very high temperature: application to ceramic refractories. J Eur Ceram Soc 36:2193–2204
Jianhua H, Shaojun L, Qiong H et al (2015) Damage constitutive model and experimental verification of seafloor massive sulfide. Electron J Geotech Eng 20(bund 23):11969–11983
Liu S, Xu J (2015) Effect of strain rate on the dynamic compressive mechanical behaviors of rock material subjected to high temperatures. Mech Mater 82:28–38
Liu S, Xu J, Zhi L et al (2013) Experimental research on mechanical behaviors of marble after high temperatures subjected to impact loading. Chin J Rock Mech Eng 32(2):243–280
Shaikh FUA, Hosan A (2016) Mechanical properties of steel fibre reinforced geopolymer concretes at elevated temperatures. Constr Build Mater 14:15–28
Tiskatine R, Eddemani A, Gourdo L et al (2016) Experimental evaluation of thermo-mechanical performances of candidate rock use in high temperature thermal storage. Appl Energy 17:243–255
Wu G, Teng NG, Wang Y (2011) Physical and mechanical characteristics of limestone after high temperature. Chin J Geotech Eng 33(2):259–264
Xu H, Zhou G, Wu W, Wu B (2012) Numerical calculation and analysis of solid–liquid two-phase flow in tank transporting equipment for deep-sea mining. Cent South Univ: Sci Technol 43(1):111–117
Ye G, Nishimura T, Zhang F (2015) Experimental study on shear and creep behavior of green tuff at high temperatures. Int J Rock Mech Min Sci 79:19–28
Zha W, Song X, Wu T et al (2014a) Experimental study of mechanical characteristics of coal-serial mudstone under different temperatures. Rock Soil Mech 35(5):1334–1339
Zha W, Song X, Wu T (2014b) Experimental study of mechanical characteristics of coal-serial sandy mudstone at different temperatures. Chin J Rock Mech Eng 33(4):809–816
Zhang Z (2012) Research cobalt crust spiral mining head cutting pick fragmentation characteristic and arrangement optimization. Changsha, School of Mechanical and Electrical Engineering, Central South University
Zhang Z, Gao F, Xu X (2011) Experimental study of temperature effect on mechanical properties of granite. Rock Soil Mech 32(8):2346–2352
Zhang L, Zhang S, Mao X et al (2012) Experimental research on thermal damage properties of mudstone at a high temperature. J Min Saf Eng 29(6):852–858
Zhao H, Yin G, Li X (2010) Experimental study of tensile characteristics of burned gritstone. Rock Soil Mech 31(4):1143–1275
Acknowledgments
The authors would like to thank the following foundations: The National High Technology Research and Development Program of China (2012AA091291) and Research project of Shenzhen Science and Technology Innovation (JCYJ20140506150310437, JCYJ20150929102555935).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hu, J., Liu, S., Zhang, R. et al. Experimental Study of Mechanical Characteristics of Cobalt-Rich Crusts Under Different Temperatures. Geotech Geol Eng 34, 1565–1570 (2016). https://doi.org/10.1007/s10706-016-0063-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10706-016-0063-1