Abstract
Bone tissue engineering is an emerging approach to provide viable substitutes for bone regeneration. Poly(ethylene glycol) (PEG) is a good candidate of bone scaffold because of several advantages such as hydrophilicity, biocompatibility, and intrinsic resistance to protein adsorption and cell adhesion. However, its low compressive strength limits application for bone regeneration. Poly(ε-caprolactone) (PCL), a hydrophobic nonionic polymer, is adopted to enhance the compressive strength of PEG alone.We aimed to investigate the in-vitro response of osteoblast-like cells cultured with porous scaffolds of triblock PEG-PCL-PEG copolymer fabricated by an air pressure-aided deposition system. A desktop air pressure-aided deposition system that involves melting and plotting PEG-PCL-PEG was used to fabricate three-dimensional scaffolds having rectangular pores. The experimental results showed that PEG-PCL-PEG with a molecular weight of 25,000 can be melted and stably deposited through a heating nozzle at an air pressure of 0.3 MPa and no crack occurs after it solidifies. The scaffolds with pre-determined pore size of 400× 420 μm and a porosity of 79 % were fabricated, and their average compressive strength was found to be 18.2 MPa. Osteoblast-like cells, MC3T3-E1, were seeded on fabricated scaffolds to investigate the in-vitro response of cells including toxicity and cellular locomotion. In a culture period of 28 days, the neutral-red stained osteoblasts were found to well distributed in the interior of the scaffold. Furthermore, the cellular attachment and movement in the first 10 h of cell culture were observed with time-lapse microscopy indicating that the porous PEG-PCL-PEG scaffolds fabricated by air pressure-aided deposition system is non-toxicity for osteoblast-like cells.
Similar content being viewed by others
References
C.D. Chin, K. Khanna, S.K. Sia, Biomed. Microdevices 10, 459 (2008)
K.B. Chirag, R.P. Shelly, J.P. Andrew, Am. J. Physiol. Cell Physiol. 290, C1640–C1650 (2006)
C. Choi, S.Y. Chae, T.H. Kim, M.K. Jang, C.S. Cho, J.W. Nah, Bull. Korean Chem. Soc. 26, 4 (2005)
N.-V. Cuong, M.-F. Hsieh, Y.-T. Chen, L. Ian, J. Biomater. Sci. Polym. Ed. 22, 1409 (2011)
N.-V. Cuong, Y.-L. Li, M.-F. Hsieh, J. Mater. Chem. 22, 1006 (2012)
C.P. Foley, N. Nishimura, K.B. Neeves, C.B. Schaffer, W.L. Olbricht, Biomed. Microdevices 11, 915 (2009)
C.Y. Gong, P.W. Dong, S. Shi, S.Z. Fu, J.L. Yang, G. Guo, X. Zhao, Y.Q. Wei, Z.Y. Qian, J. Pharm. Sci. 98, 3707 (2009)
Y. Hu, D.W. Grainger, S.R. Winn, J.O. Hollinger, J. Biomed. Mater. Res. 59, 563 (2002)
M.J. Hwang, M.K. Joo, B.G. Choi, M.H. Park, I.W. Hamley, B. Jeong, Macromol. Rapid Commun. 31, 2064 (2010)
V. Karageorgiou, D. Kaplan, Biomaterials 26, 5474 (2005)
H.W. Kim, J.C. Knowles, H.E. Kim, Biomaterials 25, 1279 (2004)
J.J. Lee, S.G. Lee, J.C. Park, Y.I. Yang, J.K. Kim, Curr. Appl. Phys. 7, 37 (2007)
S.J. Lee, H.W. Kang, J.K. Park, J.W. Rhie, S.K. Hahn, D.W. Cho, Biomed. Microdevices 10, 233 (2008)
C. Lu, S.R. Guo, Y. Zhang, Z. Li, J. Gu, Eur. Polym. J. 43, 1857 (2007)
A.K. Michael, Biomaterials 25, 1697 (2004)
A. Nakahira, T. Murakami, T. Onoki, T. Hashida, J. Am. Ceram. Soc. 88, 1334 (2005)
S.H. Oh, I.K. Park, J.M. Kim, J.H. Lee, Biomaterials 28, 1664 (2007)
S.J. Park, Y.J. Yang, H.B. Lee, Colloids Surf. B 38, 35 (2004)
S.R. Peyton, C.M. Ghajar, C.B. Khatiwala, A.J. Putnam, Cell Biochem. Biophys. 47, 300–320 (2007)
C.A. Reinhart-King, M. Dembo, D.A. Hammer, Biophys. J. 95, 6044–6051 (2008)
M. Schieker, H. Seitz, I. Drosse, S. Seitz, W. Mutschler, European Journal of Trauma, 114 (2006)
L. Shor, E.D. Yildirim, S. Güçeri, W. Sun, Precision Extruding Deposition for Freeform Fabrication of PCL and PCL-HA Tissue Scaffolds, Printed Biomaterials, 91–110 (2010)
N. Specchia, A. Pagnotta, M. Cappella, A. Tampieri, F. Greco, J. Mater. Sci. 37, 577 (2002)
G.J. Wang, Y.C. Lin, S.H. Hsu, Biomed. Microdevices 12, 841 (2010)
H.J. Yen, C.S. Tseng, S.H. Hsu, C.L. Tsai, Biomed. Microdevices 11, 615 (2009)
Y. Zhu, C. Gao, J. Shen, Biomaterials 23, 4889 (2002)
Acknowledgment
The authors acknowledge gratefully the financial support from the National Science Council under Grant no. 98-2622-E-150-015-CC3.
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Below is the link to the electronic supplementary material.
ESM 1
(PPT 35742 kb)
Rights and permissions
About this article
Cite this article
Jiang, CP., Chen, YY., Hsieh, MF. et al. Solid freeform fabrication and in-vitro response of osteoblast cells of mPEG-PCL-mPEG bone scaffolds. Biomed Microdevices 15, 369–379 (2013). https://doi.org/10.1007/s10544-013-9740-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10544-013-9740-5