Abstract
This paper proposes a combustion model based on a turbulent flame speed closure (TFC) technique for large eddy simulation (LES) of premixed flames. The model was originally developed for the RANS (Reynolds Averaged Navier Stokes equations) approach and was extended here to LES. The turbulent quantities needed for calculation of the turbulent flame speed are obtained at the sub grid level. This model was at first experienced via an test case and then applied to a typical industrial combustor with a swirl stabilized flame. The paper shows that the model is easy to apply and that the results are promising. Even typical frequencies of arising combustion instabilities can be captured. But, the use of compressible LES may also lead to unphysical pressure waves which have their origin in the numerical treatment of the boundary conditions.
Similar content being viewed by others
References
Roux, S., Lartique, G., Poinsot, T., Meier, U., Berat, C.: Studies of mean and unsteady flow in a swirled combustor using experiments, acoustic analysis and large eddy simulations. Combust. Flame 141, 40–54 (2005)
Fureby, C., Lofstrom, C.: Large eddy simulation of bluff body stabilized flames. In: Proceedings of the Combustion Institute, vol. 25, pp. 783–791. Combustion Institute, Pittsburgh (1994)
Fureby, C., Moller, S.I.: Large eddy simulation of reacting flows applied to bluff body stabilized flames. AIAA J 33(12), 2339–2347 (1995)
Colin, O., Ducros, F., Veynante, D., Poinsot, T.: A thickened flame model for large eddy simulations of turbulent premixed combustion. Phys. Fluids. 12, 1843–1863 (2000)
Boger, M., Veynante, D., Boughanem, H., Trouve, A.: Direct numerical simulation analysis of flame surface density concept for large eddy simulation of turbulent premixed combustion. In: 27th Symp. (Int) on Combustion, pp. 917–927. Combustion Institute, Pittsbugh (1998)
Williams, F. A.: Turbulent combustion. In: Buckmaster, J.D. (ed.) The Mathematics of Combustion, pp. 197–1318. Society for Industrial & Appied Mathematics, Philadelphia (1985)
Zimont, V.L., Lipatnikov, A.N.: A numerical model of premixed turbulent combustion of gases. Chem. Phys. Rep. 14(7), 993–1025 (1995)
Peters, N.: The turbulent burning velocity for large scale and small scale turbulence. J. Fluid Mech. 384, 107–132 (1999)
Poinsot, T., Veynante, D.: Theoretical and Numerical Combustion. R.T. Edwards, Philadelphia (2001)
Dinkelacker, F., Hölzler, S., Leipertz, A.: Investigations with a turbulent flame-speed-closure model for premixed turbulent flame calculations. Comb. Sci. Tech. 158, 321–340 (2000)
Schmid, H.P., Habisreuther, P., Leuckel, W.: A model for calculating heat release in premixed turbulent flames. Combust. Flame 113, 79–91 (1998)
Schmid, H.P.: Ein Verbrennungsmodell zur Beschreibung der Wärmefreisetzung von vorgemischten turbulenten Flammen. Dissertation, University Karlsruhe (2000)
Smagorinsky, J.: General circulation experiments with the primitive equations, I, the basic experiment. Mon. Weather Rev. 91, 99–164 (1963)
Polifke, W., Flohr, P., Brandt, M.: Modeling of inhomogeneously premixed combustion with an extended TFC model. In: Proceedings of ASME TURBO EXPO, paper 2000-GT-0135, Munich, 8–11 May 2000
Zimont, V.L., Polifke, W., Bettelini, M., Weisenstein, W.: An efficient computational model for premixed turbulent combustion at high Reynolds numbers based on a turbulent flame speed closure. J. Eng. Gas Turbine Power, Trans. ASME 120, 526–532 (1997)
Hettel, M., Habisreuther, P., Bockhorn, H.: Unsteady Reynolds-Averaged Navier-Stokes (URANS) – modeling of flame transfer functions of turbulent premixed jet flames (paper: 670). In: Proceedings of Twelfth International Congress on Sound and Vibration (ICSV12), vol. CD-ROM. International Institute of Acoustics and Vibration, Auburn (2005)
Borghi, R.: Modelling of premixed turbulent combustion for smart control. In: 4th Symposium on Smart Control of Turbulence, Tokyo, 2–4 March 2003
Fröhlich, J.: Large eddy simulation turbulenter Strömungen. ISBN-10 3-8351-0104-8 (2006)
Flohr, P., Pitsch, H.: A turbulent flame speed closure model for LES of industrial burner flows. In: Proceedings of the Summer Program, pp. 169–179. Stanford Summer Program (2000)
Zajadatz, M., Hettel, M., Leuckel, W.: Burning velocity of high-turbulence natural gas flames for gas turbine application. In: Proceedings of the International Gas Research Conference, pp. 793–803, San Diego, 8–11 November 1998
Leuckel, W., Lauer, G., Hirsch, C., Habisreuther, P.: Mathematische Modellierung der Wechselwirkung von Turbulenz und Reaktion unter den in Gasturbinenbrennkammern vorliegenden Bedingungen. Technischer Bericht 3.1.3.4, AG Hochtemperatur Gasturbine, Turboflam (1994)
Möllenstedt, T.: Untersuchung des Makrolängenmaßes und der turbulenten Brenngeschwindigkeit an geometrisch ähnlichen Modellbrennern. Diplomarbeit, Engler-Bunte-Institut, Division of Combustion Technology, University of Karlsruhe (TH), Germany (1999)
Klein, M., Sadiki, A., Janicka, J.: A digital filter based generation of inflow data for spatially developing direct numerical or large eddy simulations. J. Comput. Phys. 286, 652–665 (2003)
Bender, C., Büchner, H.: Noise emissions from a premixed swirl combustor. In: Twelfth International Congress on Sound and Vibration, Lisbon, 11–14 July 2005
Habisreuther, P., Bender, C., Petsch, O., Buechner, H., Bockhorn, H.: Prediction of pressure oscillations in a premixed swirl combustor flow and comparison to measurements. Flow Turbul. Combust. 77(14), 147–160 (2006)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, F., Habisreuther, P., Hettel, M. et al. Modelling of a Premixed Swirl-stabilized Flame Using a Turbulent Flame Speed Closure Model in LES. Flow Turbulence Combust 82, 537–551 (2009). https://doi.org/10.1007/s10494-008-9175-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10494-008-9175-x