Abstract
New composites of a water-stable chromium-based metal organic framework MIL-101 and mesoporous carbon CMK-3 were in situ synthesized with different ratios of MIL-101 and CMK-3 using the hydrothermal method. The composites as well as the parent materials were characterized by X-ray diffraction, thermo gravimetric analysis, scanning electron microscope, transmission electron microscope and nitrogen/carbon dioxide adsorption isotherms. The hybrid material possesses the same crystal structure and morphology as its parent MIL-101, and exhibits an enhancement in CO2 adsorption uptakes when compared to MIL-101 and CMK-3. The increase in CO2 uptakes was attributed to the combined effect of the formation of additional micropores, the enhancement of micropore volume and the activation of unsaturated metal sites by CMK-3 incorporation.
Similar content being viewed by others
References
Arstad, B., Fjellvag, H., Kongshaug, K.O., Swang, O., Blom, R.: Amine functionalized metal organic frameworks (MOFs) as adsorbents for carbon dioxide. Adsorption 14, 755–762 (2008)
Buso, D., Nairn, K.M., Gimona, M., Hill, A.J., Falcaro, P.: Fast synthesis of MOF-5 microcrystals using sol-gel SiO2 nanoparticles. Chem. Mater. 23, 929–934 (2011)
Chang, F., Chao, K., Cheng, H., Tan, C.: Adsorption of CO2 onto amine-grafted mesoprous silicas. Sep. Purif. Technol. 70, 87–95 (2009)
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., Margiolaki, I.A.: A chromium terephthalate-based solid with unusually large pore volumes and surface area. Science 309, 2040–2042 (2005)
Furukawa, H., Ko, N., Go, Y.B., Aratani, N., Choi, S.B., Choi, E., Yazaydin, A.O., Snurr, R.Q., Keeffe, M.O., Kim, J., Yaghi, O.M.: Ultra-high porosity in metal-organic frameworks. Science 329, 424–428 (2010)
Govindasamy, C., Won, J.S., Wha, S.A.: Synthesis of mesoporous materials SBA-15 and CMK-3 from fly ash and their application for CO2 adsorption. J. Porous Mater. 16, 545–551 (2009)
Guo, B., Chang, L., Xiel, K.: Adsorption of carbon dioxide on activated carbon. J. Nat. Gas Chem. 15, 223–229 (2006)
Jun, S., Joo, S.H., Ryoo, R., Kruk, M., Jaroniec, M., Liu, Z., Ohsuna, T., Terasaki, O.: Synthesis of new, nanoporous carbon with hexagonally ordered mesostructure. J. Am. Chem. Soc. 122, 10712–10713 (2000)
Kaye, S.S., Dailly, A., Yaghi, O.M., Long, J.R.: Impact of preparation and handing on the hydrogen storage properties of Zn4O(1,4-benzenedicarboxylate)3 (MOF-5). J. Am. Chem. Soc. 129, 14176–14177 (2007)
Krungleviciute, V., Lask, K., Heroux, L., Migone, D., Lee, J.Y., Skoulidas, A.: Argon adsorption on Cu3(benzene-1,3,5-tricarboxylate)2(H2O)3 metal-organic. Langmuir 23, 3106–3109 (2007)
Kumar, R., Jayaramule, K., Maji, T.K., Rao, C.N.R.: Hybrid nanocomposites of ZIF-8 with grapheme oxide exhibiting tunable morphology, significant CO2 uptake and other novel properties. Chem. Commun. 49, 4947–4949 (2013)
Li, L., Wen, X., Fu, X., Wang, F., Zhao, N., Xiao, F.K., Wei, W., Sun, Y.H.: MgO/Al2O3 sorbent for CO2 capture. Energy Fuels 24, 5773–5780 (2010)
Li, Y., Sun, N.N., Li, L., Zhao, N., Xiao, F.K., Wei, W., Sun, Y.H., Huang, W.: Grafting of amines on ethanol-extracted SBA-15 for CO2 adsorption. Materials 6, 981–999 (2013)
Liewellyn, P.L., Bourrelly, S., Serre, C., Vimont, A., Daturi, M., Iiamon, L.: High uptakes of CO2 and CH4 in mesoporous metal-orfanic frameworks MIL-100 and MIL-101. Langmuir 24, 7245–7250 (2008)
Liu, Y.Y., Zeng, J.L., Zhang, J., Xu, F., Sun, L.X.: Improved hydrogen strorage in the modified metal-organic frameworks by hydrogen spillover effect. Int. J. Hydrogen Energy 32, 4005–4010 (2007)
Liu, J., Wang, Y., Benin, A.I., Jakubczak, P., Willis, R.R., Levan, M.D.: CO2/H2O adsorption equilibrium and rates on metal-organic frameworks: HKUST-1 and Ni/DOBDC. Langmuir 26, 14301–14307 (2010)
Liu, J., Thallapally, P.K., McGrail, B.P., Brown, D.R., Liu, J.: Process in adsorption-based CO2 capture by metal-organic frameworks. Chem. Soc. Rev. 41, 2308–2322 (2012)
Maksimchuk, N.V., Timofeeva, M.N., Melgunov, M.S., Shmakov, A.N., Chesalov, Y.A., Dybtsev, D.N., Fedin, V.P., Kholdeeva, O.A.: Heterogeneous selective oxidation catalysts based on coordination polymer MIL-101 and transition metal-substituted polyoxometalates. J. Catal. 257, 315–323 (2008)
Martacaltzi, C.S., Lemonidou, A.A.: Development of new CaO based sorbent materials for CO2 removal at high temperature. Microporous Mesoporous Mater. 110, 119–127 (2008)
Millwar, A.R., Yaghi, O.M.: Metal-organic frameworks with exceptionally high capacity for storage of carbon dioxide at room temperature. J. Am. Chem. Soc. 127, 17998–17999 (2005)
Miyamoto, M., Fujiokax, Y., Yogo, K.: Pure silica CHA type zeolite for CO2 separation using pressure swing adsorption at high pressure. J. Mater. Chem. 22, 20186–20189 (2012)
Pachfule, P., Balan, B.K., Kurungot, S., Banerjee, R.: One-dimensional confinement of a nanosized metal-organic framework in carbon nanofibers for improved gas adsorption. Chem. Comm. 48, 2009–2011 (2012)
Petit, C., Bandosz, T.J.: MOF-graphite oxide nanocomposites: surface characteriazation and ecaluation as adsorbents of ammonia. J. Mater. Chem. 19, 6521–6528 (2009a)
Petit, C., Bandosz, T.J.: MOF-graphite oxide composites: combing the uniqueness of grapheme layers and metal-organic frameworks. Adv. Mater. 21, 4753–4757 (2009b)
Petit, C., Bandosz, T.J.: Enhanced adsorption of ammonia on metal-organic framework/graphite oxide composites: analysis of surface interactions. Adv. Funct. Mater. 20, 111–118 (2010)
Petit, C., Mendoza, B., Bandoza, T.: Reactive adsorption of ammonia on Cu-based MOF/grapheme composites. Langmuir 26, 15302–15309 (2010)
Petit, C., Burress, J., Bandosz, T.J.: The synthesis and characterization of copper-based metal-organic framework/graphite oxide composites. Carbon 49, 563–572 (2011)
Policicchio, A., Zhao, Y.X., Zhong, Q., Agostino, R.G., Bandosz, T.J.: Cu-BTC/aminated graphite oxide composites as high-efficiency CO2 capture media. ACS Appl. Mater. Interfaces 6, 101–108 (2014)
Prasanth, K.P., Rallapalli, P., Raj, M.C., Bajaj, H.C., Jasra, R.V.: Enhanced hydrogen sorption in single walled carbon nanotube incorporated MIL-101 composite metal-organic framework. Int. J. Hydrogen Energy 36, 7594–7601 (2011)
Rallapalli, P.B.S., Raj, M.C., Patil, D.V., Prasanth, P.K., Somani, R.S., Bajaj, H.C.: Activated carbon@MIL-101(Cr): a potential metal-organic framework composite material for hydrogen strorage. Int. J. Energy Res. 37, 746–753 (2013)
Shao, W., Zhang, L.Z., Li, L.X., Lee, R.L.: Adsorption of CO2 and N2 on synthesized NaY zeolite at high temperatures. Adsorption 15, 497–505 (2009)
Suddik, A.C., Cote, A.P., Wong-Foy, A.G., O’Keeffe, M., Yaghi, O.M.: A metal-organic framework with a hierarchical system of pores and tetrahedral building blocks. Angew. Chem. Int. Ed. 45, 2528–2533 (2006)
Sun, Y., Liu, X.W., Su, W., Zhou, Y.P., Zhou, L.: Studies on ordered mesoporous materials for potential environmnental and clean energy applications. Appl. Surf. Sci. 253, 5650–5655 (2007)
Wong, S., Bioletti, R.: Carbon dioxide separation technologies. Carbon & Energy Management, Alberta Research Council, Edmonton, Alberta, Canada (2002)
Wu, H., Simmons, J.M., Srinivas, G., Zhou, W., Yildirim, T.: Adsorption sites and binding nature of CO2 in prototypical metal-organic frameworks: a combined neutron diffraction and first-principles study. J. Phys. Chem. Lett. 1, 1946–1951 (2010)
Wu, C.M., Rathi, M., Ahrenkiel, S.P., Koodali, R.T., Wang, Z.Q.: Facile synthesis of MOF-5 confined in SBA-15 hybrid material with enhanced hydrostability. Chem. Comm. 49, 1223–1225 (2013)
Yang, S.J., Choi, J.Y., Chae, H.K., Cho, J.H., Nahm, K.S., Park, C.R.: Preparation and enhanced hydrostability and hydrogen storage capacity of CNT@MOF-5 hybrid composite. Chem. Mater. 21, 1893–1897 (2009)
Yang, H., Gong, M., Chen, Y.: Preparation of activated carbons and their adsorption properties for greenhouse gases: CH4 and CO2. J. Nat. Gas Chem. 20, 460–464 (2011)
Yazaydin, A.O., Snurr, R.Q., Park, T.H., Koh, K., Liu, J., Levan, M.D., Benin, A.I., Jakubazak, P., Lanuza, M., Galloway, D.B., Low, J.J., Willis, R.R.: Screening of metal-organic frameworks for carbon dioxide capture from flue gas using a combined experimental and modeling approach. J. Am. Chem. Soc. 131, 18198–18199 (2009)
Zhang, Z.Z., Ruan, H.Z., Zhou, Y.P., Su, W., Sun, Y., Zhou, L.: A research note on the adsorption of CO2 and N2. Chin. J. Chem. Eng. 19, 733–737 (2011)
Zhang, Z.Z., Tang, J.D., Sun, Y., Su, W.: Water effect on amine-modification of adsorbents for separation of CO2/N2. Trans. Tianjin Univ. 19, 313–318 (2013)
Zhao, D.Y., Feng, J.L., Huo, Q.S., Melosh, N., Fredrickson, G.H., Chmelka, B.F., Stucky, G.D.: Triblock copolymer synthesis of mesoporous silica with periodic 50 to 300 Angstrom pores. Science 279, 548–552 (1998)
Zhao, Y.X., Seredych, M., Zhong, Q., Bandosz, T.J.: Superior performance of copper based MOF and aminated graphite oxide composites as CO2 adsorbents at room temperature. ACS Appl. Mater. Interfaces 5, 4951–4959 (2013)
Zhao, Y.X., Seredych, M., Jagiello, J., Zhong, Q., Bandosz, T.J.: Insight into the mechanism of CO2 adsorption on Cu-BTC and its composites with graphite oxide or aminated graphite oxide. Chem. Eng. J. 239, 399–407 (2014)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, Z., Wang, H., Chen, X. et al. Chromium-based metal–organic framework/mesoporous carbon composite: synthesis, characterization and CO2 adsorption. Adsorption 21, 77–86 (2015). https://doi.org/10.1007/s10450-015-9651-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10450-015-9651-2