Skip to main content
SpringerLink
Log in

Stability analysis of the Lingshan gold mine tailings dam under conditions of a raised dam height

  • Original Paper
  • Published:
Bulletin of Engineering Geology and the Environment Aims and scope Submit manuscript

Abstract

The Lingshan gold tailings dam was constructed using the upstream method. To ensure that the Lingshan tailings pond is safe in its current condition and during future operation, a stability analysis was necessary. In this study, the performance of the tailings material was analyzed based on such geotechnical parameters as the grain size distribution, cyclic triaxial strength, and undrained triaxial compressive strength. First, the stability of the Lingshan tailings embankment was computed using the limit equilibrium method with the Slope/w software package. The dynamic response was later analyzed using the Quake/w software package, and the acceleration history at the crest, the dynamic liquefaction zone, and the factors of stability during the earthquake were obtained. Based on this dynamic analysis, the embankment with a crest at an elevation of 109 m (elev. 109 m) is stable after seismic loading, but the embankment with a crest at an elevation of 120 m (elev. 120 m) is not stable.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

References

  • Abolfazl S, Ali P, Mohyeddin SB, Amir SH (2007) Geotechnical characteristics of copper mine tailings: a case study. Geotech Geol Eng 25:591–602

    Article  Google Scholar 

  • Arrdal IB (2007) Aknes landslide area-analysis of correlation between borehole geophysical data and fracture frequency from core logging. MS thesis: Norweigian University Science and Technology, Trondheim

  • Chen HW, van Zyl DJA (1988) Shear strength and volume change behavior of copper tailings under saturated conditions. In: Van Zyl DJA, Vick SG (eds) Hydraulic fill structures. American Society of Civil Engineers, Geotechnical Special Publication 21, pp 430–451

  • China Earthquake Administration (2008a) Analysis of the cause of the M8.0 Wenchuan earthquake. http://www.cea.gov.cn/manage/html/8a8587881632fa5c0116674a018300cf/_content/08_05/30/1212119940937.html. Accessed 29 July 2009 (in Chinese)

  • Dawson EM, Roth WH, Drescher A (1999) Slope stability analysis by strength reduction. Geotechnique 49(6):835–840

    Article  Google Scholar 

  • Duncan JM (1996) State of the art: limit equilibrium and finite element analysis of slopes. J Geotech Eng ASCE 122(7):577–596

    Article  Google Scholar 

  • Fourie AB, Papageorgiou G (2001) Defining an appropriate steady state line for Merriespruit gold tailings. Can Geotech J 38:695–706

    Article  Google Scholar 

  • GEO-SLOPE International Ltd (2010a) Stress-deformation modeling with Slope/W 2007 version: an engineering methodology

  • GEO-SLOPE International Ltd (2010b) Stability modeling with Quake/W 2007 version: an engineering methodology

  • Jakka RS (2007) Liquifaction resistance and dynamic properties of coal ash. PhD dissertation, Indian Institute of Technology Delhi, New Delhi, India

  • Jakka RS, Ramaiah BJ, Ramana GV (2011) Dynamic characterization of settled pond ash: correlation between SPT-N value and measured shear wave velocity. Int J Geotech Earthq Eng 2(1):83–97

    Article  Google Scholar 

  • Kanagasbai J (1980) Analyses of flow failures of mine tailings impoundments. University of California, Berkeley

    Google Scholar 

  • Kramer SL, Seed HB (1988) Initiation of soil liquefaction under static loading conditions. J Geotech Eng 114(4):412–430

    Article  Google Scholar 

  • Kwak MY, James DF, Klein K (2005) Flow behavior of tailings paste for surface disposal. Int J Miner Process 77:139–153

    Article  Google Scholar 

  • Lane PA, Griffiths DV (2000) Assessment of stability of slopes under drawdown conditions. J Geotech Geoenviron Eng 126(5):443–450

    Article  Google Scholar 

  • Laxmi KK, Ernest KY, Colin DR (2012) A semi-empirical approach for estimation of bed shear stress in a tailings pond. Environ Earth Sci 66:823–834

    Article  Google Scholar 

  • Nazli TO, Resat U, Nihat SI (2013) A study on geotechnical characterization and stability of downstream slope of a tailings dam to improve its storage capacity (Turkey). Environ Earth Sci 69:1871–1890

    Article  Google Scholar 

  • Newmark NM (1965) Effects of earthquakes on dams and embankments. Geotechnique 15(2):139–160

    Article  Google Scholar 

  • Noureddine D, Ahmed A, Mostefa B (2011) Static liquefaction of sandy soil: an experimental investigation into the effects of saturation and initial state. Acta Mech 218:175–186

    Article  Google Scholar 

  • Ravi SJ, Ramana GV, Manoj D (2011a) Seismic slope stability of embankments constructed with Pond Ash. Geotech Geol Eng 29:821–835

    Article  Google Scholar 

  • Ravi SJ, Ramana GV, Manoj D (2011b) Seismic slope stability of embankments constructed with pond Ash. Geotech Geol Eng 29:821–883

    Article  Google Scholar 

  • Rico M, Benito G, Salgueiro AR, Diez-Herrero A, Pereira HG (2008) Reported tailings dam failures—a review of the European incidents in the worldwide context. J Hazard Mater 154:846–852

    Article  Google Scholar 

  • Seed HB, Lee KL, Idriss IM (1969) Analysis of the Sheffield dam failure. J Soil Mech Found Div 195(6):1453–1490

    Google Scholar 

  • Seed HB, Idriss IM, Arango I (1983) Evaluation of liquefaction potential using field performance data. J Geotech Eng ASCE 109(3):458–482

    Article  Google Scholar 

  • Tsuchida H (1970) Prediction and counter measure against the liquefaction in sand deposits. Seminar Abstract In: Port Harbour Research Institute, pp 3.1–3.33

  • Vidar K, Amir M, Farrokh N (2009) Dynamic distinct-element analysis of the 800 m high Aknes rock slope. Int J Rock Mech Min Sci 46:686–698

    Article  Google Scholar 

  • Wang T, Zhou Y, Lv Q, Zhu Y, Jiang C (2011) A safety assessment of the new Xiangyun phosphogypsum tailings pond. Miner Eng 24:1084–1090

    Article  Google Scholar 

  • Wijewickreme D, Sriskandakumar S, Byrne PM (2005) Cyclic loading response of loose air-pluviated Fraser River sand for validation of numerical models simulating centrifuge tests. Can Geotech J 42:550–561

    Article  Google Scholar 

  • Yamamuro JA, Covert KM (2001) Monotonic and cyclic liquefaction of very loose sands with high silt content. J Geotech Geoenviron Eng ASCE 127(4):314–324

    Article  Google Scholar 

  • Yamamuro JA, Lade PV (1997) Static liquefaction of very loose sands. Can Geotech J 34(6):905–917

    Article  Google Scholar 

  • Yamamuro JA, Lade PV (1998) Steady state concepts and static liquefaction of silty sands. J Geotech Geoenviron Eng ASCE 124(9):868–877

    Article  Google Scholar 

  • Yin GZ, Li GZ, Wei ZA, Ling W, Shui GH, Jing XF (2011) Stability analysis of a copper tailings dam via laboratory model tests: a Chinese case study. Miner Eng 24:122–130

    Article  Google Scholar 

  • Zhang WJ, Lu WB, Chen M (2012) Analysis of consolidation grouting effect of rock mass based on comparison of wave velocity before and after grouting. Chinese J Rock Mech Eng 31(3):469–478

    Google Scholar 

  • Zhu JQ, Kong LW, Zhong FJ (2008) Analysis of strength characteristics of Nanjing sand and mechanism of static liquefaction. Rock Soil Mech 29:1641–1646

    Google Scholar 

  • Zienkiewicz OC, Humpeson C, Lewis RW (1975) Associated and nonassociated visco-plasticity in soil mechanics. Geotechnique 25(4):671–689

    Article  Google Scholar 

Download references

Acknowledgments

This study was financially supported by the National Basic Cultural Research Program of the Chinese Education Ministry and the Natural Science Foundation of Jiangsu Province, China (Grant Nos. 708043 and BE2011772).

Author information

Authors and Affiliations

  1. School of Earth Science and Engineering, Nanjing University, Nanjing, 210093, China

    Baotian Xu

  2. School of Architecture and Civil Engineering, Jiangsu University of Science and Technology, Zhenjiang, 212003, China

    Yuying Wang

Authors
  1. Baotian Xu
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yuying Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Baotian Xu.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Xu, B., Wang, Y. Stability analysis of the Lingshan gold mine tailings dam under conditions of a raised dam height. Bull Eng Geol Environ 74, 151–161 (2015). https://doi.org/10.1007/s10064-014-0602-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10064-014-0602-z

Keywords

Search

Navigation