Abbreviations
- Alpha (α):
-
The angle between tunnel axis and the planes of weakness
- AR:
-
Advanced rate
- BI:
-
Brittleness index
- BTS:
-
Brazilian tensile strength
- BWI:
-
Bit wear index
- CLI:
-
Cutter life index
- CAI:
-
Cherchar abrasivity index
- CCS:
-
Constant cross section
- CSM:
-
Colorado School of Mines Model
- DPW:
-
Distance between planes of weakness
- DRI:
-
Drilling rate index
- FPI:
-
Field penetration index
- GRRD:
-
Geology and rock related downtime
- MCSM:
-
Modified Colorado School of Mines Model
- NTNU:
-
Norwegian University of Sciences and University
- ORD:
-
Other related downtime
- Q :
-
Rock mass classification system
- Q TBM :
-
Modified Q system
- RME:
-
Rock mass excavation index
- RMi:
-
Rock mass index
- RMR:
-
Rock mass rating
- ROP:
-
Rate of penetration
- RQD:
-
Rock quality designation
- RSR:
-
Rock structure rating
- U (%):
-
Utilization
- UCS:
-
Uniaxial compressive strength
References
Adamson WR, Berndt RJ (1986) Correlation of model tunnel boring and drilling machine performances with rock properties. Int J Rock Mech Mining Sci 23(2):171–175
Barton N (2000) TBM tunneling in jointed and faulted rock. Balkema, Brookfield, p 173
Benardos AG, Kaliampakos DC (2004) Modeling TBM performance with artificial neural networks. Tunn Undergr Space Technol 19:597–605
Bieniawski ZT, Celada B, Galera JM (2007) TBM Excavability: prediction and machine and rock interaction. In: Proceedings of rapid excavation and tunneling conferences, Toronto, pp 15–18
Blindheim OT (1979) Bore ability predictions for tunneling, PhD thesis, Department of Geological Engineering, the Norwegian Institute of Technology, p 406
Bruland A (1999) Hard rock tunnel boring; advance rate and cutter wear. Volume 3, PhD Thesis, Trondheim Norwegian University of Science and Technology, Trondheim
Cassinelli F, Cina S, Innaurato N, Mancini R, Sampaolo A (1982) Power consumption and metal wear in tunnel-boring machines: analysis of tunnel boring machine operation in hard rock. In: Tunneling’82, p 73–81
Farmer IW, Glossop NH (1980) Mechanics of disc cutter penetration. Tunn Tunn 12(6):22–25
Gong QM, Zhao J (2009) Development of a rock mass characteristics model for TBM penetration rate prediction. Int J Rock Mech Min Sci 46(1):8–18
Gong QM, Zhao J, Jiao YY (2005) Numerical modeling of the effects of joint orientation on rock fragmentation by TBM cutters. Tunn Undergr Space Technol 20(2):183–191
Gong QM, Jiao YY, Zhao J (2006) Numerical modeling of the effects of joint spacing on rock fragmentation by TBM cutters. Tunn Undergr Space Technol 21(1):46–55
Graham PC (1976) Rock exploration for machine manufactures. Proceedings symposium on exploration for rock engineering. Johannesburg, South Africa, pp 173–180
Hamidi JK, Shahriar K, Rezai B, Rostami J (2010) Performance prediction of hard rock TBM using rock mass rating (RMR) system. Tunn Undergr Space Technol 25:333–345
Hassanpour J, Rostami J, Khamechian M, Bruland A, Tavakoli HR (2010) TBM performance analysis in pyroclastic rocks: case history of Karaj Water conveyance tunnel. Rock Mech Rock Eng 43:427–445
Herrenknecht AG (2006) Technical documentation of hard rock TBM S323
Innaurato N, Mancini R, Rondena E, Zaninetti A (1991) Forecasting and effective TBM performances in a rapid excavation of a tunnel in Italy. Proceeding of 7th International Congress on Rock Mechanics. Aachen, Germany, pp 1009–1014
Kim T (2004) Development of a fuzzy logic based utilization predictor model for hard rock tunnel boring machines. PhD Thesis, Colorado School of Mines, Colorado, p 254
Nelson P (1993) TBM performance analysis with reference to rock properties. In: Hudson J (ed) Comprehensive rock engineering, vol 4, pp 261–291
Ozdemir L (1977) Development of theoretical equations for predicting tunnel borability. Ph.D. Thesis, T-1969, Colorado School of Mines, Golden Colorado
Palmstrom A (1995) RMi parameters applied in prediction of tunnel boring penetration. In: Chapter 7; RMI-A rock mass characterization system for rock engineering purposes. PhD thesis, Oslo, p 400
Pang SS, Goldsmith W, Hood M (1989) A force-indentation model for brittle rocks. Rock Mech Rock Eng 22:127–148
Ribacchi R, Lembo-Fazio A (2005) Influence of rock mass parameters on the performance of TBM in a gneissic formation. Rock Mech Rock Eng 38(2):105–127
Rostami J, Ozdemir L (1993) A new model for performance prediction of hard rock TBM. In: Proceedings of rapid excavation and tunneling conference, Boston, pp 793–809
Roxborough FF, Phillips HR (1975) Rock excavation by disc cutter. Int J Rock Mech Min Sci 12:361–366
Sanio HP (1985) Prediction of the performance of disc cutters in anisotropic rock. Int J Rock Mech Mining Sci Geomech Abstr 22(3):153–161
Sapigni M, Berti M, Bethaz E, Busillo A, Cardone G (2002) TBM performance estimation using rock mass classification. Int J of Rock Mech Mining Sci 39:771–778
Sato K, Gong F, Itakura K (1991) Prediction of disc cutter performance using a circular rock cutting ring. In: Proceedings 1st International Mine Mechanization and Automation Symposium, June, Colorado School of Mines, Golden Colorado
SCE (2004) Engineering Geology Report of Karaj-Tehran Water Conveyance Tunnel (Lot 1), SCE Archive
SCE (2006-2009) Engineering Geology Maps and Site Reports of Conveyance Tunnel (Lot 1), SCE Archive
Snowdon AR, Ryley DM, Temporal J (1982) Study of disc cutting in selected British rocks. Int J Rock Mech Mining Sci 19:107–121
Tarkoy PJ (1975) Rock hardness index properties and geotechnical parameters for predicting tunnel boring machine performance. PhD thesis, University of Illinois at Urbana-Champaign, Illinois, p 326
McFeat-Smith I (1977) Rock property testing for the assessment of tunneling machine performance. Tunn Tunn 9:29–33
Yagiz S (2002) Development of rock fracture and brittleness indices to quantify the effects of rock mass features and toughness in the CSM Model basic penetration for hard rock tunneling machines. PhD Thesis. 2002. Mining and Earth Systems Engineering, Colorado School of Mines, Golden Colorado, p 289 (unpublished)
Yagiz S (2008) Utilizing rock mass properties for predicting TBM Performance in hard rock condition. Tunn Undergr Space Technol 23:326–339
Yagiz S (2009) Assessment of brittleness using rock strength and density with punch penetration test. Tunn Undergr Space Technol 24:66–74
Yagiz S (2011) Comments on the article “Performance prediction of hard rock TBM using rock mass rating (RMR) system” by J.K. Hamidi et al. [Tunneling and Underground Space Technology, 25 (2010) 333–345]. Tunn Undergr Space Technol 26:649–650
Yagiz S, Karahan H (2011) Prediction of hard rock TBM penetration rate using particle swarm optimization. Int J Rock Mech Mining Sci 48:427–433
Yagiz S, Gokceoglu C, Sezer E, Iplikci S (2009a) Application of two non-linear prediction tools to the estimation of tunnel boring machine performance. Eng Appl Artif Intell 22:818–824
Yagiz S, Rostami J, Kim T, Ozdemir L, Merguerian C (2009b) Factors influencing performance of hard rock tunnel boring machine. In: Vrkljan I et al (eds) Eurock’09-rock engineering in difficult ground conditions. Croatia, Cavtat, pp 695–700
Yagiz S, Merguerian C, Kim T (2010) Geological controls on the breakthrough of tunnel boring machines in hard rock crystalline terrains. In: Zhao J et al. (eds) Eurock’10-rock mechanics in civil and environmental engineering, Switzerland, Lausanne, pp 401–404
Yagiz S, Kim T, Frough O, Torabi SR (2013) Rock mass rating system for predicting TBM utilization. In: Kwasniewski M et al. (eds) Eurock’12-rock mechanics for resources, energy and environment, Poland, Wroclaw, pp 921–925
Acknowledgments
The authors wish to acknowledge the management and the personnel of SCE, especially G. Hamsi, M. Tajic, A. Novin, H.R. Tavakoli and M. Oruji, for their cooperation and assistance during the research work.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Frough, O., Torabi, S.R. & Yagiz, S. Application of RMR for Estimating Rock-Mass–Related TBM Utilization and Performance Parameters: A Case Study. Rock Mech Rock Eng 48, 1305–1312 (2015). https://doi.org/10.1007/s00603-014-0619-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-014-0619-4