Abstract
Capacitive pressure sensor have become good substitute for piezoresistive pressure sensor because of low power consumption. In order to evaluate the characteristic profile for touch mode micro pressure sensor an accurate and simple model needs to be designed. Hence preferable analytical model is necessary to design and characterize the device. Lot of study has been done on touch mode capacitive sensing but no elaborate work has been presented to clearly understand the underlying expressions and the role of key performance parameters. With this step by step theoretical evaluation model the key performance parameter such as deflection, capacitance and sensitivity can be easily studied for both non-touch and touch mode capacitive pressure sensor. The next aspect has been to simulate the findings in order to validate the results and hence MATLAB has been introduced. It also eliminates the need for design using FEM and hence the study becomes lot easier.
Similar content being viewed by others
References
Daigle M et al (2007) An analytical solution to circular touch mode capacitor. IEEE Sens J 7(4):502–505
Fragiacomo G et al (2010) Analysis of small deflection touch mode behaviour in capacitive pressure sensor. Sens Actuators A Phys 161:114–119
Jindal SK, Raghuwanshi SK (2014) A complete analytical model for circular diaphragm pressure sensor with freely supported edge. Microsys Technol. doi:10.1007/s00542-014-2144-5
Ko WH, Wang Q (1999) Touch mode capacitive pressure sensors. Sens Actuators A Phys 75:242–251
Lee MK et al (2013) Numerical analysis of touch mode capacitive pressure sensor using graphical user interface. In: Gaol FL (ed) DEIT, vol 1. Springer, Berlin, Heidelberg, pp 371–377
Mehregany M et al (1998) Silicon carbide MEMS for harsh environments. In: Proc. IEEE, vol 86, pp 1594–1610
Meng G, Ko WH (1999) Modelling of circular diaphragm and spreadsheet solution programming for touch mode capacitive sensors. Sens Actuators A Phys 75:45–52
Soin N, Majlis BY (2002) An analytical study on diaphragm behaviour for micro machined capacitive pressure sensor. In: ICSE Proc., pp 505–10
Timoshenko SP (1959) Non linear problems in bending of circular plates, theory of plates and shells. Maple press, New York
Timoshenko SP, Kreiger S (1959) Theory of plates and shells, 2nd edn. McGraw Hill, New York
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jindal, S.K., Mahajan, A. & Raghuwanshi, S.K. A complete analytical model for clamped edge circular diaphragm non-touch and touch mode capacitive pressure sensor. Microsyst Technol 22, 1143–1150 (2016). https://doi.org/10.1007/s00542-015-2475-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00542-015-2475-x