Abstract
The thickness optimization is used to regulate the dynamic response of a thin plate of arbitrary geometry subjected to any type of admissible boundary conditions. The optimization problem consists in establishing the thickness variation law for which the fundamental frequency is maximized, minimized or forced to reach a prescribed value. Beside the equality constraint of constant volume, the thickness variation is subjected also to inequality constraints resulting from serviceability requirements (upper and lower thickness bounds) as well as to a nonlinear inequality constraint which ensures that the optimum solution remains within the limits of Kirchhoff plate theory. The evaluation of the objective function requires the solution of the dynamic bending problem of a plate with variable thickness which is solved using the analog equation method in conjunction with the boundary element method. A nonlinear optimization problem is formulated, and the optimum solution is obtained through the sequential quadratic programming algorithm. The thickness is approximated using integrated radial basis functions which approximate accurately not only the thickness function but also its first and second derivatives involved in the plate equation and in the constraints. Several plate optimization problems have been studied giving realistic and meaningful optimum designs without violating the validity of the thin plate theory.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Grandhi R.: Structural optimization with frequency constraints—a review. AIAA J. 31(12), 2296–2303 (1993)
Olhoff N.: Optimal design of vibrating circular plates. Int. J. Solids Struct. 6, 139–156 (1970)
Olhoff N.: Optimal design of vibrating rectangular plates. Int. J. Solids Struct. 10, 93–109 (1974)
Thambiratnam D.P., Thevendran V.: Optimum vibrating shapes of beams and circular plates. J. Sound Vib. 121(1), 13–23 (1988)
Hinton E., Ozakca M., Sienz J.: Optimum shapes of vibrating axisymmetric plates and shells. J. Sound Vib. 167(3), 511–528 (1993)
Ozakca M., Hinton E.: Free vibration analysis and optimization of axisymmetric plates and shells—II. Shape optimization. Comput. Struct. 52(6), 1199–1211 (1994)
Afonso S.M.B., Hinton E.: Free vibration analysis and shape optimization of variable thickness plates and shells—II. Sensitivity analysis and optimization. Comput. Syst. Eng. 6(1), 47–66 (1995)
Falco S.A., Afonso S.M.B., Vaz L.E.: Analysis and optimal design of plates and shells under dynamic loads—II: optimization. Struct. Multidisc. Optim. 27, 197–209 (2004)
Lamancusa J.S.: Numerical optimization techniques for structural-acoustic design of rectangular panels. Comput. Struct. 48(4), 661–675 (1993)
Zhao C., Steven G.P., Xie Y.M.: Evolutionary natural frequency optimization of thin plate bending vibration problems. Struct. Optim. 11, 244–251 (1996)
Cheng K.-T., Olhoff N.: An investigation concerning optimal design of solid elastic plates. Int. J. Solids Struct. 17, 305–323 (1981)
Cheng K.-T.: On non-smoothness in optimal design of solid, elastic plates. Int. J. Solids Struct. 17, 795–810 (1981)
Rozvany G.I.N, Olhoff N., Cheng K.-T., Taylor J.E.: On the solid plate paradox in structural optimization. J. Struct. Mech. 10(1), 1–32 (1982)
Niordson F.: Optimal design of elastic plates with a constraint on the slope of the thickness function. Int. J. Solids Struct. 19(2), 141–151 (1983)
Bendsee M.P.: On obtaining a solution to optimization problems for solid, elastic plates by restriction of the design space. Mech. Based Des. Struct. Mach. 11(4), 501–521 (1983)
Kohn R.V., Vogelius M.: A new model for thin plate with rapidly varying thickness. Int. J. Solids Struct. 20(4), 333–350 (1984)
Katsikadelis J.T., Babouskos N.G.: Stiffness and buckling optimization of thin plates with BEM. Arch. Appl. Mech. 82, 1402–1422 (2012)
Katsikadelis, J.T.: The analog equation method. A powerful BEM-based solution technique for solving linear and nonlinear engineering problems. In: Brebbia, C.A. Boundary Element Method XVI, pp. 167–182. Computational Mechanics Publications, Southampton (1994)
Katsikadelis J.T.: The Boundary Element Method for Plate Analysis. Academic Press, Oxford (2014)
Katsikadelis J.T.: The 2D elastostatic problem in inhomogeneous anisotropic bodies by the meshless analog equation method (MAEM). Eng. Anal. Bound. Elem. 32, 997–1005 (2008)
Timoshenko S., Woinowsky-Krieger S.: Theory of Plates and Shells, 2nd edn. McGraw-Hill Book Company, New York (1959)
Babouskos N., Katsikadelis J.T.: Flutter instability of damped plates under combined conservative and nonconservative loads. Arch. Appl. Mech. 79, 541–556 (2009)
Hartmann F., Zotemantel R.: The direct boundary element method for plate bending. Int. J. Numer. Methods Eng. 23, 2049–2069 (1986)
Katsikadelis J.T.: Boundary Elements: Theory and Applications. Elsevier, Amsterdam (2002)
Katsikadelis J.T., Yiotis A.J.: The BEM for plates of variable thickness on nonlinear biparametric elastic foundation. An analog equation solution. J. Eng. Math. 46(3–4), 313–330 (2003)
Liu G.R.: Mesh Free Methods Moving Beyond the Finite Element Method. CRC Press, Boca Raton, FL (2003)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Babouskos, N.G., Katsikadelis, J.T. Optimum design of thin plates via frequency optimization using BEM. Arch Appl Mech 85, 1175–1190 (2015). https://doi.org/10.1007/s00419-014-0962-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00419-014-0962-7