Skip to main content
Log in

A method for measuring the complex refractive index and thickness of a thin metal film

  • Published:
Applied Physics B Aims and scope Submit manuscript

Abstract

A circularly polarized heterodyne light beam is incident on a thin metal film, causing successive reflections and refractions to occur at the two sides of the thin film. The phase difference between p- and s-polarizations of the multiple-beam interference signal can be measured accurately with an analyzer and heterodyne interferometry. The phase difference depends on the azimuth angle of the analyzer, the complex refractive index and the thickness of the thin metal film. The measured values of the phase differences under three different azimuth angles of the analyzer can be substituted into the special equations derived from Fresnel’s equations and multiple-beam interference. Hence, the complex refractive index and the thickness of the thin metal film can be estimated by using a personal computer with a numerical analysis technique. Because of its common-path optical configuration and its heterodyne interferometric phase measurement, this method has many merits, such as high stability against surrounding vibrations, high resolution and easy operation.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. M. Cathelinaud, F. Lemarquis, C. Amra: Appl. Opt. 41, 2546 (2002)

    Article  ADS  Google Scholar 

  2. E. Elizalde, J.M. Frigerio, J. Rivory: Appl. Opt. 25, 4557 (1986)

    Article  ADS  Google Scholar 

  3. H.G. Tompkins, T. Zhu, E. Chen: J. Vac. Sci. Technol. A 16, 1297 (1998)

    Article  ADS  Google Scholar 

  4. V.A. Lodi, S. Donati, S. Merlo, D. Beltrami: Appl. Opt. 37, 5298 (1998)

    Article  ADS  Google Scholar 

  5. M.H. Chiu, J.Y. Lee, D.C. Su: Appl. Opt. 38, 4047 (1999)

    Article  ADS  Google Scholar 

  6. H. Kitajima, K. Hiea, Y. Suematsu: J. Opt. Soc. Am. 70, 1507 (1980)

    Article  ADS  Google Scholar 

  7. J. Lekner: J. Opt. Soc. Am. A 11, 2156 (1994)

    Article  ADS  Google Scholar 

  8. E.W. Rogala, H.H. Barrett: J. Opt. Am. A 15, 538 (1998)

    Article  ADS  Google Scholar 

  9. A.B. Djurisic, T. Fritz, K. Leo: Opt. Commun. 166, 35 (1999)

    Article  ADS  Google Scholar 

  10. J.Y. Lee, D.C. Su: J. Opt. 29, 349 (1998)

    Article  ADS  Google Scholar 

  11. M. Born, E. Wolf: Principles of Optics, 7th edn. (Cambridge University Press, Cambridge 1999), Chap. 1

  12. K.H. Chen, C.C. Hsu, D.C. Su: Opt. Commun. 209, 167 (2002)

    Article  ADS  Google Scholar 

  13. Y.C. Cheng, W.K. Su, J.H. Liou: Opt. Eng. 39, 311 (2000)

    Article  ADS  Google Scholar 

  14. S.A. Campbell: The Science and Engineering of Microelectronic Fabrication, 1st edn. (Oxford University Press, Oxford 1990) p. 292

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to K.H. Chen.

Additional information

PACS

78.66.Bz; 78.20.Ci; 07.60.Cy

Rights and permissions

Reprints and permissions

About this article

Cite this article

Chen, K., Hsu, C. & Su, D. A method for measuring the complex refractive index and thickness of a thin metal film . Appl. Phys. B 77, 839–842 (2003). https://doi.org/10.1007/s00340-003-1292-6

Download citation

  • Received:

  • Revised:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00340-003-1292-6

Keywords

Navigation