Skip to main content
SpringerLink
Log in

Modeling of porous structures for rapid prototyping of tissue engineering scaffolds

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Rapid prototyping techniques are increasingly used to build porous scaffolds for the regeneration of biological tissues. This paper deals with one of the most critical tasks involved by this option, i.e., the preparation of geometric data for layered fabrication. Compared to other existing approaches, this work aims at both reducing the required effort in interactive modeling and allowing a standard use of commercial prototyping systems without resorting to special treatments. The proposed method adds a porous structure to the geometric model of tissue surface in polygon format. The structure is of the Cartesian type and consists of an interconnected network of rectilinear channels, whose dimensions can be varied according to desired porosity and pore size. The algorithmic procedures needed for the generation of the porous structure have been implemented in a demonstrative software tool. Sample models of scaffolds have been generated and used to build prototype parts by different fabrication processes and systems.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Hutmacher DW (2000) Scaffolds in tissue engineering bone and cartilage. Biomaterials 21:2529–2543

    Article  Google Scholar 

  2. Leong KF, Cheah CM, Chua CK (2003) Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. Biomaterials 24:2363–2378

    Article  Google Scholar 

  3. Yang S, Leong KF, Du Z, Chua CK (2002) The design of scaffolds for tissue engineering. Part II: rapid prototyping techniques. Tissue Eng 8:1–11

    Article  Google Scholar 

  4. Das S, Hollister SJ, Flanagan C, Adewunmi A, Bark K, Chen C, Ramaswamy K, Rose D, Widjaja E (2003) Freeform fabrication of nylon-6 tissue engineering scaffolds. Rapid Prototyping J 9–1:43–49

    Article  Google Scholar 

  5. Tan KH, Chua CK, Leong KF, Cheah CM, Cheang P, Abu Bakar MS, Cha SW (2003) Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. Biomaterials 24:3115–3123

    Article  Google Scholar 

  6. Williams JM, Adewunmi A, Schek RM, Flanagan CL, Krebsbach PH, Feinberg SE, Hollister SJ, Das S (2005) Bone tissue engineering using caprolactone scaffolds fabricated via selective laser sintering. Biomaterials 26:4817–4827

    Article  Google Scholar 

  7. Wu BM, Borland SW, Giordano RA, Cima LG, Sachs EM, Cima MJ (1996) Solid free-form fabrication of drug delivery devices. J Contr Release 40:77–87

    Article  Google Scholar 

  8. Lam CXF, Mo XM, Teoh SH, Hutmacher DW (2002) Scaffold development using 3D printing with a starch-based polymer. Mater Sci Eng C 20:49–56

    Article  Google Scholar 

  9. Zein I, Hutmacher D, Tan KC, Teoh SH (2002) Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials 23:1169–1185

    Article  Google Scholar 

  10. Too MH, Leong KF, Chua CK, Du ZH, Yang SF, Cheah CM, Ho SL (2002) Investigation of 3D non-random porous structures by fused deposition modeling. Int J Adv Manuf Tech 19:217–223

    Google Scholar 

  11. Ang TH, Sultana FSA, Hutmacher DW, Wong YS, Fuh JYH, Mo XM, Loh HT, Burdet E, Teoh SH (2002) Fabrication of 3D chitosan hydroxyapatite scaffold using a robotic dispensing system. Mater Sci Eng C 20:35–42

    Article  Google Scholar 

  12. Xiong Z, Yan Y, Wang S, Zhang R, Zhang C (2002) Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition. Scripta Mater 46:771–776

    Article  Google Scholar 

  13. Yan Y, Wu R, Zhang R, Xiong Z, Lin F (2003) Biomaterial forming research using RP technology. Rapid Prototyping J 9:142–149

    Article  Google Scholar 

  14. Landers R, Pfister A, Hübner U, John H, Schmelzeisen R, Mühlaupt R (2002) Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques. J Mater Sci 37:3107–3116

    Article  Google Scholar 

  15. Landers R, Hübner U, Schmelzeisen R, Mühlaupt R (2002) Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering. Biomaterials 23:4437–4447

    Article  Google Scholar 

  16. Calvert P, Liu Z (1998) Freeform fabrication of hydrogels. Acta Mater 46:2565–2571

    Article  Google Scholar 

  17. Vozzi G, Flaim C, Ahluwalia A, Bhatia S (2003) Fabrication of PLGA scaffolds using soft lithography and microsyringe deposition. Biomaterials 24:2533–2540

    Article  Google Scholar 

  18. Wang F, Shor L, Darling A, Khalil S, Sun W, Güçeri S, Lau A (2004) Precision extruding deposition and characterization of cellular poly-ɛ-caprolactone tissue scaffolds. Rapid Prototyping J 10–1:42–49

    Article  Google Scholar 

  19. Chen Z, Li D, Lu B, Tang Y, Sun M, Wang Z (2004) Fabrication of artificial bioactive bone using rapid prototyping. Rapid Prototyping J 10–5:327–333

    Article  Google Scholar 

  20. Chen Z, Li D, Lu B, Tang Y, Sun M, Xu S (2005) Fabrication of osteo-structure analogous scaffolds via fused deposition modeling. Scripta Mater 52:157–161

    Article  Google Scholar 

  21. Khalil S, Nam J, Sun W (2005) Multi-nozzle deposition for construction of 3D biopolymer tissue scaffolds. Rapid Prototyping J 11–1:9–17

    Article  Google Scholar 

  22. Geng L, Feng W, Hutmacher DW, Wong YS, Loh HT, Fuh JYH (2005) Direct writing of chitosan scaffolds using a robotic system. Rapid Prototyping J 11–2:90–97

    Article  Google Scholar 

  23. Bose S, Darsell J, Hosick HL, Yang L, Sarkar DK, Bandyopadhyay A (2002) Processing and characterization of porous alumina scaffolds. J Mater Sci Mater Med 13:23–28

    Article  Google Scholar 

  24. Chu TMG, Orton DG, Hollister SJ, Feinberg SE, Halloran JW (2002) Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures. Biomaterials 23:1283–1293

    Article  Google Scholar 

  25. Taboas JM, Maddox RD, Krebsbach PH, Hollister SJ (2003) Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds. Biomaterials 24:181–194

    Article  Google Scholar 

  26. Lee M, Dunn JCY, Wu BM (2005) Scaffold fabrication by indirct three-dimensional printing. Biomaterials 26:4281–4289

    Article  Google Scholar 

  27. Schroeder C, Regli WC, Shokoufandeh A, Sun W (2005) Computer-aided design of porous artifacts. Comput Aided Des 37:339–353

    Article  Google Scholar 

  28. Fang Z, Starly B, Sun W (2005) Computer-aided characterization for effective mechanical properties of porous tissue scaffolds. Comput Aided Des 37:65–72

    Article  Google Scholar 

  29. Lal P, Sun W (2004) Computer modeling approach for microsphere-packed bone scaffold. Comput Aided Des 36:487–497

    Article  Google Scholar 

  30. Hollister SJ, Maddox RD, Taboas JM (2002) Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. Biomaterials 23:4095–4103

    Article  Google Scholar 

  31. Chua CK, Leong KF, Chea CM, Chua SW (2003) Development of a tissue engineering scaffold structure library for rapid prototyping. The Int. J. of Advanced Manufacturing Technology 21:291-312

    Article  Google Scholar 

  32. Fadel GM, Kirschman C (1996) Accuracy issues in CAD to RP translation. Rapid Prototyping J 2–2:4–17

    Article  Google Scholar 

  33. Ferguson RS (2001) Practical algorithms for 3D computer graphics. A K Peters, Natick, MA

  34. O’Rourke J (1994) Computational geometry in C. Cambridge University Press, Cambridge

    MATH  Google Scholar 

  35. Lorensen WE, Cline HE (1987) Marching cubes: a high resolution 3D surface construction algorithm. Comput Graph 21–4:163–169

    Google Scholar 

  36. Pelzer R, Ott A (2004) Fabrication of scaffold structures by rapid prototyping methods. Proc. Int. Design Conference, Dubrovnik, pp 453–458

Download references

Author information

Authors and Affiliations

  1. Dipartimento di Meccanica, Politecnico di Milano, via La Masa 34, 20156, Milan, Italy

    Antonio Armillotta

  2. Lehrstuhl für Feingerätebau und Mikrotechnik, Technische Universität München, Boltzmannstr. 15, 85747, Garching, Germany

    Ralph Pelzer

Authors
  1. Antonio Armillotta
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ralph Pelzer
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Antonio Armillotta.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Armillotta, A., Pelzer, R. Modeling of porous structures for rapid prototyping of tissue engineering scaffolds. Int J Adv Manuf Technol 39, 501–511 (2008). https://doi.org/10.1007/s00170-007-1247-x

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-007-1247-x

Keywords

Search

Navigation