Abstract
Assuming a rigid plastic material model with arbitrary smooth yield criterion, it is shown that the plane strain solutions are singular in the vicinity of maximum friction surfaces. In particular, some components of the strain rate tensor and thus the equivalent strain rate approach infinity. It is also shown that the exact asymptotic representation of the solution near maximum friction surfaces depends on the shape of the yield contour in the Mohr stress plane.
References
Hill R.: The Mathematical Theory of Plasticity. Clarendon Press, Oxford (1950)
Spencer A.J.M.: A theory of the kinematics of ideal soils under plane strain conditions. J. Mech. Phys. Solids 12, 337–351 (1964)
Rice J.R.: Plane strain slip line theory for anisotropic rigid/plastic materials. J. Mech. Phys. Solids 21, 63–74 (1973)
Druyanov B.: Technological Mechanics of Porous Bodies. Clarendon Press, New-York (1993)
Harris D., Grekova E.F.: A hyperbolic well-posed model for the flow of granular materials. J. Eng. Math. 52, 107–135 (2005)
Atkins A.G., Rowe G.M., Johnson W.: Shear strains and strain-rates in kinematically admissible velocity fields. Int. J. Mech. Eng. Edu. 10, 265–278 (1982)
Alexandrov S., Richmond O.: Singular plastic flow fields near surfaces of maximum friction stress. Int. J. Non-Linear Mech. 36, 1–11 (2001)
Alexandrov S., Lyamina E.: Singular solutions for plane plastic flow of pressure-dependent materials. Dokl. Phys. 47, 308–311 (2002)
Fleck N.A., Durban D.: Steady penetration of a rigid cone with a rough wall into a power law viscous solid. Trans. ASME J. Appl. Mech. 58, 872–880 (1991)
Durban D., Rand O.: Singular fields in plane strain penetration. Trans. ASME J. Appl. Mech. 58, 910–915 (1991)
Durban D.: Friction and singularities in steady penetration. In: Durban, D., Pearson, J.R.A. (eds) IUTAM Symposium on Non-Linear Singularities in Deformation and Flow., pp. 141–154. Kluwer, Dordrecht (1999)
Alexandrov S.: Specific features of solving the problem of compression of an orthotropic plastic material between rotating plates. J. Appl. Mech. Techn. Phys. 50, 886–890 (2009)
Alexandrov S.: Behavior of anisotropic plastic Solutions in the vicinity of maximum-friction surfaces. J. Appl. Mech. Techn. Phys. 52, 483–490 (2011)
Alexandrov S., Mishuris G.: Qualitative behaviour of viscoplastic solutions in the vicinity of maximum-friction surfaces. J. Eng. Math. 65, 143–156 (2009)
Fries T.-P., Belytschko T.: The extended/generalized finite element method: an overview of the method and its applications. Int. J. Numer. Meth. Eng. 84, 253–304 (2010)
Moylan S.P., Kompella S., Chandrasekar S., Farris T.N.: A new approach for studying mechanical properties of thin surface layers affected by manufacturing processes. Trans. ASME J. Manuf. Sci. Eng. 125, 310–315 (2003)
Trunina T.A., Kokovkhin E.A.: Formation of a finely dispersed structure in steel surface layers under combined processing using hydraulic pressing. J. Mach. Manuf. Reliab. 37, 160–162 (2008)
Alexandrov S., Grabko D., Shikimaka O.: The determination of the thickness of a layer of intensive deformations in the vicinity of the friction surface in metal forming processes. J. Mach. Manuf. Reliab. 38, 277–282 (2009)
Author information
Authors and Affiliations
Corresponding author
Additional information
Communicated by Andreas Öchsner.
Rights and permissions
About this article
Cite this article
Alexandrov, S., Jeng, YR. Singular rigid/plastic solutions in anisotropic plasticity under plane strain conditions. Continuum Mech. Thermodyn. 25, 685–689 (2013). https://doi.org/10.1007/s00161-013-0304-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00161-013-0304-y