Abstract
Topology optimization is one of the most effective tools for conducting lightweight design and has been implemented across multiple industries to enhance product development. The typical topology optimization problem statement is to minimize system compliance while constraining the design space to an assumed volume fraction. The traditional single-material compliance problem has been extended to include multiple materials, which allows increased design freedom for potentially better solutions. However, compliance minimization has the limitations for practical lightweight design because compliance lacks useful physical meanings and has never been a design criterion in industry. Additionally, the traditional compliance minimization problem statement requires volume fraction constraints to be selected a priori; however, designers do not know the optimized balance among materials. In this paper, a more practical method of multi-material topology optimization is presented to overcome the limitations. This method seeks the optimized balance among materials by minimizing the total weight while satisfying performance constraints. This paper also compares the weight minimization approach to compliance minimization. Several numerical examples prove the success of weight minimization and demonstrate its benefit over compliance minimization.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Abbreviations
- ρ j::
-
one design variable (i.e. nominal density) relevant to the j-th material in any element;
- \({\rho }_{e}^{j}\)::
-
one design variable (i.e. nominal density) relevant to the j-th material in the e-th element;
- ρ j::
-
all design variables (i.e. a vector of nominal densities) relevant to the j-th material;
- \((\rho ^{j})^{p}, ({\rho }_{e}^{j})^{p}\)::
-
powers of ρj and \({\rho }_{e}^{j}\) with the component p;
- E j,E (j)::
-
original elastic modulus of the j-th material;
- W j,W (j)::
-
original weight of any element filled with the j-th material;
- \({W_{e}^{j}}, W_{e}^{(j)}\)::
-
original weight of the e-th element filled with the j-th material;
- E (1,⋯ ,j),W (1,⋯ ,j)::
-
interpolated elastic modulus and weight of the materials from the first to the j-th materials for any element.
References
Allaire G, Jouve F, Toader AM (2004) Structural optimization using sensitivity analysis and a level-set method. J Comput Phys 194(1):363–393. https://doi.org/10.1016/j.jcp.2003.09.032
Bendsøe MP (1989) Optimal shape design as a material distribution problem. Structural Optimization 1 (4):193–202. https://doi.org/10.1007/BF01650949
Bendsøe MP, Kikuchi N (1988) Generating optimal topologies in structural design using a homogenization method. Comput Methods Appl Mech Eng 71 (2):197–224. https://doi.org/10.1016/0045-7825(88)90086-2
Bendsøe M, Sigmund O (2003) Topology optimization: theory, methods and applications, 2nd edn. Springer, Berlin
Bruyneel M (2011) SFP—a new parameterization based on shape functions for optimal material selection: application to conventional composite plies. Struct Multidiscip Optim 43(1):17–27. https://doi.org/10.1007/s00158-010-0548-0
Cai K, Cao J, Shi J, Liu L, Qin QH (2016) Optimal layout of multiple bi-modulus materials. Struct Multidiscip Optim 53(4):801–811. https://doi.org/10.1007/s00158-015-1365-2
Cristello N, Kim IY (2007) Multidisciplinary design optimization of a zero-emission vehicle chassis considering crashworthiness and hydroformability. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 221(5):511–526. https://doi.org/10.1243/09544070JAUTO440
Deaton J, Grandhi R (2014) A survey of structural and multidisciplinary continuum topology optimization: post 2000. Struct Multidiscip Optim 49(1):1–38. https://doi.org/10.1007/s00158-013-0956-z
Eschenauer H, Olhoff N (2001) Topology optimization of continuum structures: a review. Appl Mech Rev 54(4):331–390. https://doi.org/10.1115/1.1388075
Gao T, Zhang W, Duysinx P (2012) A bi-value coding parameterization scheme for the discrete optimal orientation design of the composite laminate. Int J Numer Methods Eng 91(1):98–114. https://doi.org/10.1002/nme.4270. arXiv:1010.1724
Guo X, Zhang W, Zhong W (2014) Stress-related topology optimization of continuum structures involving multi-phase materials. Comput Methods Appl Mech Eng 268:632–655. https://doi.org/10.1016/j.cma.2013.10.003
Hilchenbach CF, Ramm E (2015) Optimization of multiphase structures considering damage. Struct Multidiscip Optim 51(5):1083–1096. https://doi.org/10.1007/s00158-014-1198-4
Hvejsel CF, Lund E (2011) Material interpolation schemes for unified topology and multi-material optimization. Struct Multidiscip Optim 43(6):811–825. https://doi.org/10.1007/s00158-011-0625-z
Jung D, Gea HC (2006) Design of an energy-absorbing structure using topology optimization with a multimaterial model. Struct Multidiscip Optim 32(3):251–257. https://doi.org/10.1007/s00158-006-0011-4
Kim IY, Kwak BM (2002) Design space optimization using a numerical design continuation method. Int J Numer Methods Eng 53(8):1979–2002. https://doi.org/10.1002/nme.369
Kim SY, Kim IY, Mechefske CK (2012) A new efficient convergence criterion for reducing computational expense in topology optimization: reducible design variable method. Int J Numer Methods Eng 90(6):752–783. https://doi.org/10.1002/nme.3343
Kim SY, Mechefske CK, Kim IY (2013) Optimal damping layout in a shell structure using topology optimization. J Sound Vib 332(12):2873–2883. https://doi.org/10.1016/j.jsv.2013.01.029
Li C, Kim IY (2015) Topology, size and shape optimization of an automotive cross car beam. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 229(10):1361–1378. https://doi.org/10.1177/0954407014561279
Li C, Kim IY (2017) Multi-material topology optimization for automotive design problems. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 095440701773790. https://doi.org/10.1177/0954407017737901
Li C, Kim IY, Jeswiet J (2015) Conceptual and detailed design of an automotive engine cradle by using topology, shape, and size optimization. Struct Multidiscip Optim 51(2):547–564. https://doi.org/10.1007/s00158-014-1151-6
Luo J, Luo Z, Chen L, Tong L, Wang MY (2008) A semi-implicit level set method for structural shape and topology optimization. J Comput Phys 227(11):5561–5581. https://doi.org/10.1016/j.jcp.2008.02.003
Mirzendehdel AM, Suresh K (2015) A Pareto-Optimal approach to multimaterial topology optimization. J Mech Des 137(10): 101,701. https://doi.org/10.1115/1.4031088
Ramani A (2010) A pseudo-sensitivity based discrete-variable approach to structural topology optimization with multiple materials. Struct Multidiscip Optim 41(6):913–934. https://doi.org/10.1007/s00158-009-0455-4
Ramani A (2011) Multi-material topology optimization with strength constraints. Struct Multidiscip Optim 43(5):597–615. https://doi.org/10.1007/s00158-010-0581-z
Sethian J, Wiegmann A (2000) Structural boundary design via level set and immersed interface methods. J Comput Phys 163(2):489–528. https://doi.org/10.1006/jcph.2000.6581. arXiv:1011.1669v3
Sigmund O (2000) A new class of extremal composites. J Mech Phys Solids 48(2):397–428. https://doi.org/10.1016/S0022-5096(99)00034-4
Sigmund O (2001) Design of multiphysics actuators using topology optimization - Part II: Two-material structures. Comput Methods Appl Mech Eng 190(49-50):6605–6627. https://doi.org/10.1016/S0045-7825(01)00252-3
Sigmund O, Maute K (2013) Topology optimization approaches. Struct Multidiscip Optim 48(6):1031–1055. https://doi.org/10.1007/s00158-013-0978-6
Sigmund O, Petersson J (1998) Numerical instabilities in topology optimization: a survey on procedures dealing with checkerboards, mesh-dependencies and local minima. Structural Optimization 16(1):68–75. https://doi.org/10.1007/BF01214002
Sigmund O, Torquato S (1997) Design of materials with extreme thermal expansion using a three-phase topology optimization method. J Mech Phys Solids 45(6):1037–1067. https://doi.org/10.1016/S0022-5096(96)00114-7
Stegmann J, Lund E (2005) Discrete material optimization of general composite shell structures. Int J Numer Methods Eng 62(14):2009–2027. https://doi.org/10.1002/nme.1259
Stolpe M, Stegmann J (2008) A Newton method for solving continuous multiple material minimum compliance problems. Struct Multidiscip Optim 35(2):93–106. https://doi.org/10.1007/s00158-007-0131-5
Svanberg K (1987) The method of moving asymptotes—a new method for structural optimization. Int J Numer Methods Eng 24(2):359–373. https://doi.org/10.1002/nme.1620240207
Tavakoli R, Mohseni SM (2014) Alternating active-phase algorithm for multimaterial topology optimization problems: a 115-line MATLAB implementation. Struct Multidiscip Optim 49(4):621–642. https://doi.org/10.1007/s00158-013-0999-1
van Dijk NP, Maute K, Langelaar M, van Keulen F (2013) Level-set methods for structural topology optimization: a review. Struct Multidiscip Optim 48(3):437–472. https://doi.org/10.1007/s00158-013-0912-y
Vermaak N, Michailidis G, Parry G, Estevez R, Allaire G, Bréchet Y (2014) Material interface effects on the topology optimization of multi-phase structures using a level set method. Struct Multidiscip Optim 50 (4):623–644. https://doi.org/10.1007/s00158-014-1074-2
Wang MY, Wang X (2004) “Color” level sets: a multi-phase method for structural topology optimization with multiple materials. Comput Methods Appl Mech Eng 193(6–8):469–496. https://doi.org/10.1016/j.cma.2003.10.008
Wang MY, Wang X, Guo D (2003) A level set method for structural topology optimization. Comput Methods Appl Mech Eng 192(1–2):227–246. https://doi.org/10.1016/S0045-7825(02)00559-5
Wang X, Mei Y, Wang MY (2004) Level-set method for design of multi-phase elastic and thermoelastic materials. Int J Mech Mater Des 1(3):213–239. https://doi.org/10.1007/s10999-005-0221-8
Wang Y, Luo Z, Kang Z, Zhang N (2015) A multi-material level set-based topology and shape optimization method. Comput Methods Appl Mech Eng 283:1570–1586. https://doi.org/10.1016/j.cma.2014.11.002
Yin L, Ananthasuresh G (2001) Topology optimization of compliant mechanisms with multiple materials using a peak function material interpolation scheme. Struct Multidiscip Optim 23(1):49–62. https://doi.org/10.1007/s00158-001-0165-z
Zhou M, Rozvany G (1991) The COC algorithm, Part II: topological, geometrical and generalized shape optimization. Comput Methods Appl Mech Eng 89(1–3):309–336. https://doi.org/10.1016/0045-7825(91)90046-9
Zhou S, Wang MY (2006) Multimaterial structural topology optimization with a generalized Cahn-Hilliard model of multiphase transition. Struct Multidiscip Optim 33(2):89–111. https://doi.org/10.1007/s00158-006-0035-9
Zhuang C, Xiong Z, Ding H (2010) Topology optimization of multi-material for the heat conduction problem based on the level set method. Eng Optim 42(9):811–831. https://doi.org/10.1080/03052150903443780
Zuo W, Saitou K (2016) Multi-material topology optimization using ordered SIMP interpolation. Struct Multidiscip Optim. https://doi.org/10.1007/s00158-016-1513-3
Acknowledgements
This research was funded by Automotive Partnership Canada and General Motors of Canada. Technical advice and direction were gratefully received from Joe Moore, Balbir Sangha, Manish Pamwar, Derrick Chow, and Chandan Mozumder, at General Motors.
Author information
Authors and Affiliations
Corresponding author
Additional information
Responsible Editor: Junji Kato, Dr.-Ing
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Li, D., Kim, I.Y. Multi-material topology optimization for practical lightweight design. Struct Multidisc Optim 58, 1081–1094 (2018). https://doi.org/10.1007/s00158-018-1953-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-018-1953-z