Abstract
A method to maximize the natural frequencies of vibration of truss-like continua with the constraint of material volume is presented. Truss-like is a kind of particular anisotropic continuum, in which there are finite numbers of members with infinitesimal spaces. Structures are analyzed by finite element method. The densities and orientations of members at nodes are taken as design variables. The densities and orientations of members in elements are interpolated by these values at nodes; therefore they vary continuously in design domain. For no intermediate densities being suppressed, there is no numerical instability, such as checkerboard patterns and one-node connected hinges. The natural frequency and its sensitivities of truss-like continuum are derived. Optimization is achieved by the techniques of moving asymptotes and steepest descent. Several numerical examples are provided to demonstrate this optimization method.
Similar content being viewed by others
References
Bendsøe M. P., Kikuchi N. (1988) Generating optimal topologies in structural design using a homogenization method. Comput Methods Appl Mech Eng 71:197–224
Eschenauer H. A., Olhoff N. (2001) Topology optimization of continuum structures: a review. Appl Mech Rev 54:331–389
Grandhi R. (1993) Structural optimization with frequency constraints—a review. AIAA J 31:2296–2303
Hemp W. S. (1973) Optimum Structure. Clarendon Press, Oxford, pp 70–101
Huang X., Zuo Z. H., Xie Y. M. (2010) Evolutionary topological optimization of vibrating continuum structures for natural frequencies. Comput Struct 88:357–364
Michell A. G. M. (1904) The limits of economy of material in framestructure. Phil Mag 8:589–597
Sethian J. A., Wiegmann A. (1999) Structural boundary design via level set and immersed interface methods. J Comput Phys 163:489–528
Sigmund O. (1998) Numerical instabilities in topology optimization: a survey on procedures dealing with checkerboards, mesh-dependencies and local minima. Struct Optim 16:68–75
Svanberg K. (1987) The method of moving asymptotes—a new method for structural optimization. Int J Numer Methods Eng 24:359–373
Tenek L. H., Hagiwara I. (1993) Static and vibrational shape and topology optimization using homogenization and mathematical programming. Comput Methods Appl Mech Eng 109:143–154
Xie Y. M., Steven G. P. (1996) Evolutionary structure optimization for dynamic problems. Comput Struct 58:1067–1073
Zhou K., Li X. (2006) Topology optimization of structures under multiple load cases using fiber-reinforced composite material model. Comput Mech 38:163–170
Zhou K., Li X. (2008) Topology optimization for minimum compliance under multiple loads based on continuous distribution of members. Struct Optim 37:49–56
Acknowledgments
This work is financially supported by the National Natural Science Foundation of China (No. 11172106, 10872072) and the Science Foundation of Huaqiao University (No. 10HZR19).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhou, K. Topology optimization of truss-like continuum structures for natural frequencies. Struct Multidisc Optim 47, 613–619 (2013). https://doi.org/10.1007/s00158-012-0870-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-012-0870-9