Skip to main content
Log in

Thermal modification of European beech at relatively mild temperatures for the use in electric bass guitars

  • Original
  • Published:
European Journal of Wood and Wood Products Aims and scope Submit manuscript

Abstract

The possibility of the use of thermally modified European beech (Fagus sylvatica L.) in necks of electric bass guitars for the substitution of Hard maple (Acer saccharum) has been studied. The heat treatments were performed at relatively mild treatment temperatures of 140 and 160 °C for 12 h. The acoustic properties were determined by means of experimental modal analysis (EMA) and the mechanical properties by means of static and impact bending tests. The results show that both the acoustic and mechanical, static properties of beech improve significantly owing to thermal modification, being similar or better compared to Hard maple. The impact bending strengths decrease owing to thermal modification. Additional tests on complete necks of electric bass guitars by means of EMA and plucking tests on total instruments show that thermally treated beech at mild temperatures can substitute Hard maple for the use as neck material in electric bass guitars.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4

Similar content being viewed by others

References

  • Biziks V, Andersons B, Andersone I, Grinins J, Irbe I, Kurnosova N, Militz H (2010) Hydrothermal modification of soft deciduous wood: bending strength properties. In: Proceedings of the Fifth European Conference on Wood Modification. Riga, pp 99–106

  • Biziks V, Andersons B, Belkova L, Kapaca E, Militz H (2013) Changes in the microstructure of birch wood after hydrothermal treatment. Wood Sci Technol 47:717–735

    Article  CAS  Google Scholar 

  • Borrega M, Niemelä K, Sixta H (2013) Effect of hydrothermal treatment intensity on the formation of degradation products from birchwood. Holzforschung 67:871–879

    Article  CAS  Google Scholar 

  • Bucur V (2006) Acoustics of wood. Springer, Berlin

    Google Scholar 

  • Dresig H, Holzweißig F (2010) Maschinendynamik, (Machine dynamics) (In German). Springer, Heidelberg

    Google Scholar 

  • Fengel J, Wegener G (2003) Wood: chemistry, ultrastructure, reaction. Verlag Kessel, München

    Google Scholar 

  • Hill CAS (2006) Wood modification. chemical, thermal and other processes. Wiley, Chichester

    Book  Google Scholar 

  • Kubojima Y, Okano T, Ohta M (1998) Vibrational properties of Sitka spruce heat-treated in nitrogen gas. J Wood Sci 44:73–77

    Article  Google Scholar 

  • Mohebby B, Yaghoubi K, Roohnia M (2007) Acoustical properties of hydrothermally modified mulberry (Morus alba L.) wood. Proceedings of the Third European Conference on Wood Modification. Cardiff, pp 283–286

  • Möser M (2010) Messtechnik der Akustik, (Acoustic measurement technique) (In German). Springer-Verlag, Berlin

    Book  Google Scholar 

  • Natke HG (1983) Einführung in die Therorie und Praxis der Zeitreihen- und Modalanalyse, (Introduction to theory and practice of time series and modal analysis) (In German). Vieweg Verlag, Braunschweig

    Google Scholar 

  • Olek W, Bonarski JT (2014) Effects of thermal modification on wood ultrastructure analyzed with crystallographic texture. Holzforschung 68:721–726

    Article  CAS  Google Scholar 

  • Pfriem A, Eichelberger K, Wagenführ A (2007) Acoustic properties of thermally modified spruce for use for violins. J Violin Soc Am 21:102–111

    Google Scholar 

  • Roffael E, Kraft R (2012) Influence of thermal wood modification on the Water Retention Value (WRV) (In German). Eur J Wood Prod 70:393–395

    Article  Google Scholar 

  • Sproßmann R, Zauer M, Pfriem A, Wagenführ A (2013) Zum Einfluss der Holzart in Bassgitarrenhälsen auf das Schwingungs- und Klangverhalten, (Regarding the influence of wood species in necks of bass guitars on the vibrational and acoustic behaviour) (In German). Holztechnologie 54:19–25

    Google Scholar 

  • Wagenführ A, Pfriem A, Grothe T, Eichelberger K (2006) Investigations on the characterisation of thermally modified spruce for sound boards of guitars (In German). Holz Roh Werkst 64:313–316

    Article  Google Scholar 

  • Wegst U (2006) Wood for sound. Am J Bot 93:1439–1448

    Article  PubMed  Google Scholar 

  • Windeisen E, Strobel C, Wegener G (2007) Chemical changes during the production of thermo-treated beech wood. Wood Sci Technol 41:523–536

    Article  CAS  Google Scholar 

  • Zauer M, Pfriem A (2010) Reinforcement of thermally modified wood for use in highly stressed components of musical instruments. In: Proceedings of the Fifth European Conference on Wood Modification. Riga, pp 31–38

  • Zauer M, Hempel S, Pfriem A, Mechtcherine V, Wagenführ A (2014) Investigations of the pore-size distribution of wood in the dry and wet state by means of mercury intrusion porosimetry. Wood Sci Technol 48:1229–1240

    Article  CAS  Google Scholar 

Download references

Acknowledgments

The authors wish to thank the Federal Ministry of Economic Affairs and Energy for the financial support for the investigations (Grant reference KF2418610CK2).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Mario Zauer.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zauer, M., Kowalewski, A., Sproßmann, R. et al. Thermal modification of European beech at relatively mild temperatures for the use in electric bass guitars. Eur. J. Wood Prod. 74, 43–48 (2016). https://doi.org/10.1007/s00107-015-0973-2

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00107-015-0973-2

Keywords

Navigation