Abstract
Positive pressure may be developed at any level in a furnace by locating the flue outlet below instead of above that level and by restricting the area of the flue outlet. Maintaining a constant air supply to the burners is often desirable. Various safety factors are of great importance.
Similar content being viewed by others
References
McGuire, J. H., “Penetration of Fire Partitions by Plastic DWV Pipe,”Fire Technology, Vol. 9, No. 1 (February 1973), pp. 5–14.
Tamura, G. T., “Computer Analysis of Smoke Movement in Tall Buildings,”ASHRAE Transactions, Vol. 75, Part 2 (1969), pp. 81–92.
Fire Protection Handbook (13th edition, National Fire Protection Association, Boston, 1969), p. 17–61.
North American Combustion Handbook, (North American Manufacturing Co., Ohio, 1952), p. 16.
Author information
Authors and Affiliations
Additional information
Note: This paper is a contribution from the Division of Building Research, National Research Council of Canada, and is published with the approval of the Director of the Division.
Rights and permissions
About this article
Cite this article
McGuire, J.H. A method of achieving positive pressure in a fire resistance furnace. Fire Technol 14, 195–205 (1978). https://doi.org/10.1007/BF01983054
Issue Date:
DOI: https://doi.org/10.1007/BF01983054