Conclusions
An ejection system for firing a tunnel kiln differs from an ejection system for firing metallurgical and machine building industry furnaces.
Investigations were conducted on a model of the ejection equipment of small high temperature kilns.
Results were obtained on the change in the coefficient of ejection in relation to the geometric parameters of the ejectors and the burners, the distance between them, the pressure in the ejection channel and the working space of the kiln, and the temperature of the air ejected.
A method of calculation of ejectors used in tunnel kilns is proposed.
Similar content being viewed by others
Literature cited
A. U. Pugovkin, Recirculation Flame Furnaces [in Russian], Mashinostroenie, Leningrad (1975).
V. G. Lisienko, V. V. Bondarenko, and B. I. Kitaev, Ejection Devices Partially Limiting a Natural Gas Flame [in Russian], Vsesoyuz. Nauch.-Issled. Inst. Ékon., Org. Proizv. i Tekh.-Ékon. Issled, v Gaz. Prom., Moscow (1974).
A. E. Erinov and B. S. Soroka, Rational Methods of Combustion of Gaseous Fuel in Heating Furnaces [in Russian], Tekhnika, Kiev (1970).
A. F. Utenkov, E. A. Sinitsyn, V. G. Abbakumov, et al., Ogneupory, No. 3, 35–39 (1983).
A. A. Ionin, Fundamentals of Calculation of Gas Burners [in Russian], Gostoptekhizdat, Moscow (1963).
Author information
Authors and Affiliations
Additional information
Translated from Ogneupory, No. 2, pp. 40–43, February, 1984.
Rights and permissions
About this article
Cite this article
Utenkov, A.F., Sinitsyn, E.A., Ionin, A.A. et al. An ejection system for firing a small high-temperature tunnel kiln. Refractories 25, 103–108 (1984). https://doi.org/10.1007/BF01387401
Issue Date:
DOI: https://doi.org/10.1007/BF01387401